|
|
|
|
|
| |
|
| |
Pressure sensors, Pressure transmitters,
Pressure transducers, Pressure switches,
Pressure measurement
|
|
|
| |
|
|
|
|
|
A
selection of recently
published
technical
articles, white papers, products
&
application examples: |
|
|
|
|
|
New piezoresistive pressure sensors from
PEWATRON |
| |
 PEWATRON
AG is offering a new range of pressure sensors. The PHPSD series are
piezoresistive pressure sensors with a measuring range of 0...10 mbar up
to 7 bar. These sensors are available with or without temperature
compensation and amplifier, as well as with a choice of either digital
or analogue output signal in each case. Accuracies of <1 % can be
guaranteed depending on the particular version. We can offer customised
variants to handle the various measuring tasks required by specific
fields of use. Suitable applications are primarily those in medical
technology such as ventilator devices, blood pressure measurement ... |
|
|
|
|
|
|
+ Info |
|
|
|
|
Pressure Transmitter with SIL2 Approval |
| |
 Baumer’s
pressure transmitter PFSX with SIL2 certification (Safety Integrity
Level 2) has been developed according to the IEC 61508 standard. It is
suitable for water treatment and energy generation applications as well
as for applications in the chemical, petrochemical, pharmaceutical, and
food & beverage industries. The measuring instrument comes with a 4…20
mA analogue output and two galvanically insulated relay outputs with
integrated test functions for alarm purposes. The PFSX can measure
pressure ranges from 0…1 up to 0…400 bar with an accuracy of ±0.5 % of
the full scale. The pressure transmitter has a four-digit red LED
display (8 mm high) with two set points. It is fully programmable on
site without any additional tools. All parameters are
password-protected. The SIL2 approval is based on the Safe Failure
Fraction (SFF) of 98 % and the Hardware Fault Tolerance (HFT) which is
0. The sensor architecture guarantees SIL2 safety without the need to
use two pressure switches to ensure redundancy. For applications in
hazardous areas, the transmitter is also available in ATEX Ex ia IIC
T5/T6, ATEX II 1G versions. ... |
|
|
|
|
|
|
+ Info |
|
|
|
|
Sub-Miniature, High Performance “In-Cell”
Amplifier from LCM Systems |
| |
 By
incorporating the second generation “in-cell” amplifier (ICA) from
LCM Systems, engineers can convert a strain gauge input to a voltage
or a current output. This high performance, sub-miniature amplifier can
be used for internal amplification of strain gauge based load cells,
pressure transducers or torque transducers. Available in six different
versions with a wide range of current and voltage outputs, this latest
amplifier with its robust construction has also been designed for quick
and easy installation. With a maximum height of only 7.6mm, a
standardised excitation of 5V DC and plated through holes for wire
connections, its versatility makes it suitable for a wide range of OEM
applications. Reverse polarity, short circuit protection and a fast
calibration procedure are just some of the other features on this CE
approved range of amplifiers. According to Steve Sargeant, Managing
Director, LCM Systems is one of only a few companies who have an
amplifier suitable for load cell integration. “The technology has been
available for many years and is widely used in pressure transducers.” ... |
|
|
|
|
|
|
+ Info |
|
|
|
|
|
|
|
|
A
selection of recently
published
technical
articles & products:
|
|
|
|
Clean-In-Place Pressure Transducer
Features Flush Diaphragm |
| |
 Stellar
Technology: The Series FT31XX clean-in-place (CIP) pressure
transmitters are designed specifically to meet the rigorous demands of
the wet and hostile environments of industrial process applications that
use a flush diaphragm and Tri-Clover flange clamps. These pressure
transmitters incorporate a one-piece, non-welded diaphragm for reliable
performance and long life in process applications such as homogenizers,
heat exchangers, filters, pasteurizers, emulsifiers, surge tanks, and
biopharmaceutical mixers. In addition, the FT31XX design does not use an
oil fill, thus eliminating the possibility of process contamination.
Users can select from analog outputs of 4-20 mA, numerous voltage
outputs, as well as digital outputs ranging from RS232 and RS485 to
CANbus. The FT31XX offers isolated voltage output as standard for
voltage output units. All internal electronics are fully potted for
shock and vibration resistance and thermal stability. ... |
|
|
|
|
|
|
+ Info |
|
|
|
|
Flush Diaphragm Pressure Transducer
Features NPT Threads, Amplified Output |
| |
 Stellar
Technology Inc offers the new Model FT29XX amplified pressure
transducer. This rugged all-welded stainless steel sensor combines a
standard NPT male process connection with a flush diaphragm. In
addition, the FT29XX pressure transmitter is designed with internal
signal conditioning. Customers can select 4-20mA current outputs,
numerous voltage outputs, as well as digital outputs including RS232,
RS485, and CANbus. The unique design of the isolation diaphragm reduces
stress levels normally caused by torquing a tapered thread into the
mating fitting. The FT29XX introduces zero dead volume to the fixturing
and resists the accumulation of residue that can clog traditional
pressure ports. The sensing element is machined from a single piece of
steel, making the FT29XX insensitive to shock and vibration. This unit
is ideal for metering and dispensing operations, for the application of
sealants and paints, or anywhere a flush diaphragm unit is desired. ... |
|
|
|
|
|
|
+ Info |
|
|
|
|
Contact Elements allow Easy Equipment of
Complex Injection Molding Tools with Pressure Sensors for Quality
Assurance |
| |
 Kistler,
leading technology provider in the global market for sensors and process
monitoring and quality assurance systems for injection molding, now
offers contact elements for easy transmission of pressure signals within
injection molds. Contact elements Type 1712A… and Type 1714A… provide
the electrical connection between cables in different mold components.
During mold assembly, these cables are connected via the contacts of
both elements. In contrast to conventional connection systems, contact
elements facilitate the equipment of complex, state-of-the-art, modular
injection molds with pressure sensor systems. This way, sensor cables
need no longer be guided through several mold plates. The individual
cables in the plates lead to contact elements, which are automatically
connected during installation. Damaged cables or time-consuming and
costly, complicated handling of cables during sensor and mold
installation ... |
|
|
|
|
|
|
+ Info |
|
|
|
|
Pressure Transmitter ED701 for High Media
Temperatures |
| |
 Baumer’s
pressure transmitter ED701 is now available with a cooling neck for
applications with high media temperatures of up to 300 °C. Thus, the
device is suitable for pressure measurement especially in sterilisation
processes in the pharmaceutical, chemical and food & beverage industries
as well as in medical technology. The ED701 features high accuracy and
long-term stability. It is available with several industrial and
hygienic process connections. Even without cooling neck, the pressure
transmitter is suitable for media temperatures of up to 150 °C, with a
standard cooling neck for temperatures of up to 200 °C, and with an
extended cooling neck for up to 300 °C. Due to the active compensation
of temperature drifts, the ED701 has a very high measuring accuracy (up
to 0.1 % F.S.). Furthermore, the device features a high long-term
stability (0.1 % per year) and excellent repeatability. If required, the
zero point can be recalibrated using a simple mechanical ... |
|
|
|
|
|
|
+ Info |
|
|
|
|
|
|
|
| |
More technical articles & products to this topic:
|
Find
all manufacturers and suppliers of
pressure sensors
pressure transmitters,
pressure transducers,
|
|
| |
|
Find
all manufacturers and suppliers of
pressure sensors
pressure transmitters,
pressure transducers, |
|
|
Multichannel Charge Amplifier Enhances Precision and Flexibility in
Laboratory Applications |
| |
|
Kistler:
Extremely accurate measurement of physical quantities in laboratory
applications requires precise signal amplification. The new, modular
high-end multichannel charge amplifier Type 5080A… from Kistler is
designed to cater to a whole variety of tasks with these requirements.
For example, it amplifies the signals from piezoelectric sensors for
multicomponent force measurement. This makes this innovative amplifier
ideal for applications such as recording the minute forces encountered
in micromachining. As the successor to charge amplifier Types 5017 and
5019, new Type 5080A… is intended for mounting in 19" racks. Its modular
design allows expansion to eight amplifier modules at any time. It can
accommodate both charge modules for piezoelectric sensors and dual-mode
modules with charge/Piezotron® input. This enables acquisition of not
only force signals but also signals from sensors measuring acceleration,
torque or pressure sensors. This possibility of combining charge and
dual-model modules in the rack permits recording of, for instance, force
and acceleration signals with the same unit. ... |
|
|
|
|
|
New and Innovative Sensor Technology
Offers Unmatched Sensitivity for Differential Low Pressure Measurement |
| |
|
Sensortechnics’
new LBA series offers differential low pressure measurement with ranges
of 250 and 500 Pa Full Scale. The LBA sensors perform fully analog
on-chip CMOS signal conditioning to allow for linear and temperature
compensated outputs with high differential pressure resolution of typ.
0.1 % and fast response times of typ. 1 ms. The LBA sensors feature
superior sensitivity and offset stability. The devices are based on
thermal flow measurement of gas through a micro-flow channel integrated
within the sensor chip. This very narrow channel decreases the flow
through the LBA sensor by several magnitudes compared to other
flow-based pressure sensors. The extremely low gas flow ensures high
immunity to dust contamination and condensation and allows the use of
connecting tubes and input filters without the need to recalibrate or
correct the output signal. Because the flow impedance is predefined at
the sensor chip level the LBA series provides very small and
cost-effective PCB-mountable housings. Important features of the new LBA
differential pressure sensor series are ... |
|
|
|
|
|
Universal Programmer for PB-Series
Pressure Transmitters |
| |
|
With
Baumer’s FlexProgrammer 9701, all pressure transmitters of the PB
family can now easily be configured on PC. The battery-powered device
can be used to recalibrate the full scale and the zero signal, to
readjust the pressure range up to 20 % F.S., and for the data logging of
pressure and temperature signals. Furthermore, with the FlexProgrammer
the upper and lower output signals as well as the alarm output signal
can be parameterised. The FlexProgrammer 9701 features an easy
menu-based programming with control function. The data transfer is
executed via a USB interface. Beside the direct configuration on PC, the
tool also allows for remote programming of individual measuring devices
in situ, which makes the FlexProgrammer highly flexible and perfect for
mobile use in all environments. ... |
|
|
|
|
|
Miniature Pressure Transducer has Flush
Diaphragm, Zero Dead Volume |
| |
|
Stellar
Technology: The Series FT290 pressure transducers are designed for
those applications requiring both a standard NPT male process connection
and a flush diaphragm with zero dead volume. These pressure sensors are
designed with a unique diaphragm design which reduces stress levels
caused by torquing a tapered thread into the mating fitting. Besides
their small size (only 3.5 oz.), these pressure sensors are constructed
of all welded stainless steel and can withstand demanding application
environments. The FT290 covers ranges from 2,000 to 10,000 psia/psig and
provides 3mV/V full scale output with 10vdc excitation. Static accuracy
is ±0.25% (BFSL). The operating temperature is -100°F to +300°F, and the
compensated temperature range is from -65°F to +250°F. Additional design
features include low sensitivity to shock and vibration, and infinite
resolution. The compact size of the Series FT290 pressure transducer
makes it ideal for many metering and dispensing applications. ... |
|
|
|
|
|
Stainless Steel OEM Pressure Sensors
Offer High Accuracy Over a Wide Temperature Range and Digital Outputs |
| |
|
Sensortechnics’
new SSI stainless steel OEM pressure sensors accurately measure gage or
absolute pressures in ranges from 200 mbar up to 35 bar. These devices
offer excellent stability and repeatability, achieving a Total Error
Band (TEB) better than ±1.5 %FSS over a temperature range of -20…+85 °C.
Sensortechnics’ SSI pressure sensors use precision digital signal
conditioning and provide both analog 0.5…4.5 V output as well as digital
I²C or alternatively SPI interfaces at the same time.microprocessors.
The SSI series features an excellent price/performance ratio. Fully
welded, media isolated rugged stainless steel constructions allow for
high media compatibility with corrosive liquids and gases. Available
packaging options include diaphragm versions with weld ring or housings
with G 1/8 threaded pressure ports. Sensortechnics’ customisation
service can provide very fast and flexible mechanical or electronic
modifications of its SSI pressure sensor series to fit each customer’s
application specific requirements. Important features of the SSI
pressure sensor series are ... |
|
|
|
|
Find
all manufacturers and suppliers of
pressure sensors
pressure transmitters,
pressure transducers, |
|
|
Kistler Instrument Corporation Type 4021A Melt Pressure Measuring Chain |
| |
|
Kistler
Instrument Corporation, a worldwide supplier of precision sensors,
systems and instrumentation for the dynamic measurement of pressure,
force, torque and acceleration, has announced the North American market
introduction of Type 4021A, a melt pressure measuring chain with ½”-20
UNF thread, designed to simultaneously measure short duration pressure
peaks and temperatures. The robust design of Kistler Type 4021A
incorporates a melt pressure sensor, constructed of a very stable,
high-temperature piezoresistive silicon sensing element, with an
abrasion-resistant stainless steel diaphragm, and an integral amplifier,
which is designed to match the sensor. The sensor is offered in multiple
lengths and angular configurations, in pressure measurement ranges of 0
to 29000 psi (0 to 3000 bar) and temperature ranges of 32 to +662°F (0
to +350°C), with choice of cable lengths. The unique performance
characteristics of Type 4021A allow for mounting of the sensor directly
in the flow of material. This eliminates the time lag typically
associated with indirect measurement systems, and enables direct
real-time measurement of the process parameters determining product
quality. ... |
|
|
|
|
|
Digital Pressure Switch with 3A-approval |
| |
|
Baumer’s
digital pressure switch series TED is now available with several
3A-approved process connections. Therefore, the hygienic measuring
instrument is especially suitable for applications in the food and
beverage and pharmaceutical industries. All wetted parts are made of
acid-proof stainless steel and comply with the FDA and EHEDG
requirements regarding design, material and finishing. The digital
pressure switch is suitable for vacuum and absolute or gauge pressure
measurements up to 400 bar. The accuracy is 0.5 % of F.S. The TED range
is designed for pressure control in industrial process engineering, such
as level management or control of cylinders. ... |
|
|
|
|
|
JUMO MIDAS C08 - basic OEM pressure
transmitter |
| |
|
The
new JUMO MIDAS C08 is the basic product of the MIDAS OEM pressure
transmitter series. For numerous measurement tasks with high quality
requirements, such as in machine and compressor construction, in
industrial pneumatic uses and in commercial vehicles, it is the ideal
partner – made in Germany. The main requirement of OEM pressure
measuring instruments like this is unlimited functionality and
availability over many years and decades, without the need for
maintenance. Outstanding long-term stability is a highly significant
factor in justifying this claim. Thanks to its new, patented sensor
technology, JUMO has been able to improve by 100 % the customary
long-term stability of comparable market products. The exceptional
vibration performance – 2.5 times as high as the industry standard –
also makes sure that the product will be ready to use for many years to
come. The temperature compensation range is a remarkable ... |
|
|
|
|
|
Sensortechnics Offers TruStabilityTM
Pressure Sensors from 60 mbar to 10 bar |
| |
|
Sensortechnics
presents the new TruStabilityTM pressure sensors from Honeywell for long
term stable pressure measurement in ranges from 60 mbar up to 10 bar (1
to 150 psi). The new RH/RS series perform digital ASIC signal
conditioning to achieve Total Error Bands (TEB) better than ±1 %FSS over
a temperature range of 0…+50 °C, or respectively better than ±2 %FSS
from -20…+85 °C. The RH/RS pressure sensors provide amplified analog
output signals or digital interfaces with I²C bus protocol (SPI output
on request) to be able to directly communicate with microcontrollers and
microprocessors. The RH/RS series offer absolute, differential and gage
pressure measurement and are intended to be used with air and
non-corrosive gases. The sensors features 3 V or 5 V supply versions. A
wide selection of miniature SIP, DIP or SMT housings allow for
space-saving PCB-mounting and maximum OEM design flexibility. Important
features of the new RH/RS pressure sensor series are ... |
|
|
|
|
|
PBMN for High-Precision Pressure
Measurement in Industrial Applications |
| |
|
With
the PBMN product, Baumer offers a highly precise pressure
transmitter for demanding applications in hydraulics or engine and
vehicle construction. The fully welded versions are available with an
accuracy of up to 0.1 % F.S. The total error band is less than 0.4 % F.S.
over the whole compensated temperature range. The transmitter can be
easily configured with the FlexProgrammer. As part of the modularly
designed PB series, which can be adapted individually to customer needs,
the PBMN is the high-end transmitter for demanding applications. Thanks
to the seal-less construction, the measuring device can be used in many
different media. The PBMN is suitable for measuring ranges from 0…100
mbar up to 0…1600 bar. It is based either on piezoresistive technology
(for pressures below 40 bar) or on metal thin film technology (for
pressures over 40 bar) ... |
|
|
|
|
Find
all manufacturers and suppliers of
pressure sensors
pressure transmitters,
pressure transducers, |
|
|
Precision digital pressure gauge with ATEX approval and data logger |
| |
|
With
the CPG1000, WIKA offers a precision digital pressure gauge that
has ATEX approval and an integrated data logger as standard. With this,
the robust and particularly easy-to-handle pressure gauge covers an
exceptionally wide range of applications: Wherever high precision,
extreme durability and the documentation of process data are required,
this instrument, equally suited to testing and calibrating, offers the
perfect on-site solution - even in hazardous areas. With its integrated
data logger, the CPG1000 enables the recording of relevant data in the
field - and its transmission to a PC, with the help of the new CPGLog
software. The recording interval can be individually configured. The
process data can then be evaluated and documented on the PC ... |
|
|
|
|
|
Tactile Pressure Sensors for use at temperatures up to 200oC (400oF)
available from Tekscan |
| |
|
Tekscan, Inc., a leading manufacturer of thin-film pressure
sensors and
force sensors and pressure measurement systems announces high
temperature, tactile pressure sensors for use in environments up to 200
°Celsius (400 °Fahrenheit). These ultra-thin (0.2 mm, 0.008 in), high
temperature, matrix based, pressure sensors are ideal tools for making
non-intrusive pressure measurements between mating surfaces. Such
measurements are extremely important in a variety of applications,
including web handling and converting, print rollers and nips,
packaging, heat sealing, laminating, and injection molding. The pressure
sensors and systems can be used to: * Measure pressure distribution
between any two mating or contacting surfaces, * Identify peak pressure
hot spots and low pressure gaps, * Record pressure distribution and
force changes over time. When used with the I-Scan® pressure measurement
system, data derived from these sensors can be used to reduce machine
set-up time, improve ... |
|
|
|
|
|
PSD-30 pressure switch with IO-Link |
| |
|
WIKA
now provides its new model PSD-30 generation of pressure switches with
an optional fieldbus independent communications interface, IO-Link. The
point-to-point connection significantly reduces the expense of
parameterisation, process monitoring and machine maintenance. By using
the IO-Link, manual input of the various instrument parameters such as
switch points, reset points and units is no longer required. These are
uploaded directly into the pressure switch from the central control
system over a standard cable and can be reproduced at any time. This
reduces the time required for commissioning or retrofitting. The
operator is supported through a flexible choice of parameters and data
documentation. IO-Link also enables diagnostics, giving precise
information on the condition of the pressure switch ... |
|
|
|
|
|
Kavlico Pressure Sensors Help Boost
Performance for Engine Control Systems for Off-Highway Vehicles |
| |
|
Kavlico,
a global business unit of Custom Sensors & Technologies (CST)
understands that in today’s economic climate, it is imperative to find
opportunities to operate vehicles more efficiently while maintaining a
green approach. These two objectives are at the forefront of each and
every OEM. Kavlico is sensitive to these requirements and is therefore
partnering with agricultural machinery manufacturers as well as other
off-highway equipment marketers to develop pressure sensors that boost
efficiencies while accurately measuring the pressure of fuel, oil,
hydraulics, and transmission fluids. Kavlico pressure sensors are media
compatible with diesel fuel, gasoline, LPG, CNG, as well as many
bio-blends. Typical pressure sensor application for off-highway vehicles
include: * Optimization of pressure across injectors, * High pressure
fuel rail for gaseous tank pressure, * Monitoring of transmission fluid
pressure to control proper gear selection, maximizing fuel economy, *
Monitoring of hydraulic pressure, * Controlling flow & pump pressure.
Rugged by design, Kavlico pressure sensors operate on ... |
|
|
|
|
|
High Accuracy HDI Pressure Sensors Offer
3 V Supply Versions for Battery Powered Applications |
| |
|
Sensortechnics
GmbH’ HDI sensors measure absolute, differential or gage pressures
in various ranges from 10 mbar up to 5 bar. The HDI series features 3 V
supply versions which are ideally suitable for battery powered
applications, e.g. in portable or handheld devices. HDI pressure sensors
perform precision digital signal conditioning and achieve ultra high
accuracies with an excellent Total Error Band (TEB) better than ±0.5 %FSS
over a temperature range of 0…+85 °C. The HDI series provides digital
interfaces with I²C bus protocol and analog 0.5 … 4.5 V output signals
at the same time therefore allowing customers to build up a redundancy
functionality for safety critical applications. The sensors are intended
to be used with air and non-corrosive gases and offer various
unidirectional, bidirectional or barometric calibrations as well as
different accuracy classes. Miniature SMT and DIP housings allow for
space-saving PCB-mounting and maximum OEM design flexibility. A wide
selection of sensor configurations are available from stock at
Sensortechnics. All HDI pressure sensors can be modified ... |
|
|
|
|
Find
all manufacturers and suppliers of
pressure sensors
pressure transmitters,
pressure transducers,
pressure measuring devices |
|
|
Measuring Nip and Roller Contact
Pressures |
| |
|
The I-Scan® System from Tekscan is a complete force and pressure
measurement system that allows the user to view, measure, record, and
evaluate static and dynamic pressures between virtually any two
contacting or mating surfaces. The I-Scan system is used to identify
roller contact pressures and nip profiles during various laminating and
printing press applications. Nip width, roller contact area and proper
parallelism of the rollers can be determined and documented in the
real-time software. This information can then be used to align rollers
before large production runs or during maintenance activities, reducing
machine setup time and minimizing product waste. Each I-Scan system
includes software, tactile, matrix-based, array pressure sensors, and a
data acquisition handle that performs an analog to digital conversion.
The system offers a USB connection to either a PC or laptop with
scanning rates of 100Hz. The software allows force and pressure data to
be viewed in real-time or displayed as colorful 2D and 3D images. Data
can also be analyzed in a multitude of graphing options, such as force
vs. time, or can be exported into ASCII compatible programs. Sensors are ... |
|
|
|
|
|
Sensors for Water Treatment Applications |
| |
|
Water
treatment applications place high demands on pressure measuring
instruments and level
measuring instruments. For these applications, Baumer offers
robust sensors which are suitable for high vibrations as well as for the
use with aggressive media. For example, sensors made of
seawater-resistant Hastelloy C and with a ceramic sensing element are
available for desalination plants. Flush mount versions are offered for
sewage applications. The devices can be easily configured on PC via the
FlexProgrammer 9701. Pressure and level measuring devices for water
treatment applications have to be extremely robust. First of all, this
concerns the materials used in instruments that are in contact with
aggressive or corrosive media in applications such as desalination
plants or sewage sludge processing. In addition, the devices have to be
highly resistant against vibrations which are generated continuously for
example in applications with volumetric pumps. Further challenges are
the formation of foam, suspended solids, and condensation in tanks. For
these challenges, Baumer offers an extensive portfolio of pressure
sensors and
level sensors ... |
|
|
|
|
|
Tire Pressure Measurement System |
| |
|
Tekscan, Inc. is pleased to announce a new generation of its
TireScan system with the release of VersaTek scanning electronics and a
new tire footprint sensor. TireScan is now easier to use and more
portable and delivers a faster scanning rate to enable more precise
measurement and evaluation of static and dynamic tire footprint pressure
patterns. TireScan captures, measures and analyzes tire footprint
pressure patterns, as well as the contact area, perimeter area, length
and width, and cross sectional profiles of various tires under different
load and inflation conditions. The system provides cross sectional
pressure profiles and high resolution, colored, pressure images for
quantitative and qualitative analysis of passenger, truck, off-road,
agricultural, and aircraft tires. This data helps to evaluate tire
design and tread patterns, conduct quality control measurements, perform
competitive benchmarking, and assess vehicle suspension. TireScan’s new
USB connection allows for portability in data capture. The system can be
taken to a remote location and placed directly on a roadway or garage
floor or mounted on a tire-rolling machine or attached to a metal plate.
Sensors can even be buried underground and simply driven over to take a
pressure measurement. ... |
|
|
|
|
|
Sensonor announces ultra low power
pressure sensor with programmable, embedded μC and optional
accelerometer |
| |
|
Sensonor
Technologies AS is launching their SP300-series, a multipurpose
digital absolute pressure sensor – fully calibrated and compensated with
programmable, embedded RISC μC and optional accelerometer. Flexible and
customer specified communication is via 5 general purpose I/O pins and a
2 channel LF receiver supporting wireless command and data reception,
which can be used for configuration and device wake up. Sophisticated
features like electronic ID, temperature measurement, supply voltage
measurement, diagnostics and an optional 125g on-chip accelerometer are
available. A set of ROM library functions simplifies code development. A
fully autonomous pressure, acceleration and temperature measurement
system is created by adding a battery, an RF transmitter IC and an
antenna. Due to the unique ultra low power architecture the sensor is
ideal for battery operation. Stand-by current is an astonishing 0.3 μA
and a low noise 11-bit measurement requires a minute 4 μAs. The
SP300-series is offered in 0.5 to 16 bar FS ranges and in a 14 pin
plastic SOIC package with optional pressure tube connection. “Launch of
SP300 is a milestone in history of MEMS pressure sensors ... |
|
|
|
|
|
Pressure Transmitter ED701 for Hygienic
Applications |
| |
|
For
hygienic pressure measurement, Baumer offers the electrical
pressure transmitter ED701. It is especially suitable for applications
in the pharmaceutical and food & beverage industries as well as in
medical technology. The measuring device features high accuracy and
long-term stability. It is available with several Clamp and hygienic
process connections. The piezo-resistive pressure transmitter ED701 with
its stainless-steel diaphragm is based on a silicon sensor designed for
high precision over a wide temperature range. This ensures that the
pressure transmitter offers very high accuracy (up to 0.1 % F.S.) and
excellent long-term stability (0.1 % per year). If required the zero
point can be recalibrated using a simple mechanical adjustment. The
measuring range can also be programmed, which allows for adaptation to ... |
|
|
|
|
Find
all manufacturers and suppliers of
pressure sensors
pressure transmitters, pressure transducers,
pressure measurement devices |
|
|
Recalibratable Submersible Sensor ED752
for Water Treatment |
| |
|
With
the ED752, Baumer offers a pressure transmitter for all kinds of
hydrostatic level and depth measurement. In case of a signal drift, the
zero point can be recalibrated. The device is characterised by high
accuracy and long-term stability. It is suitable for applications in
drinking water supply, hydroelectric power plants, flood protection,
wastewater, pools, reservoirs, lakes and rivers, shipbuilding, and many
industrial applications such as pump controls. The ED752’s accuracy is
0.1 % F.S., and its long-term stability is 0.1 % per year. The measuring
range can be parameterised, which allows an adaptation to
customer-specific surroundings ... |
|
|
|
|
|
Subsea Wellbore Temperature + Pressure
Transducer |
| |
|
Stellar
Technology’s Model PT36XX subsea wellbore temperature and pressure
transducer delivers long-term performance in harsh subsea oil and gas
exploration environments. It has a total error band of ±1% of full scale
output and is designed for working pressures to 15,000 psi and seawater
depths to 17,000 ft. Both temperature and pressure sensors are located
at the flush-end of the wellbore probe, a design feature that improves
dynamic response and alleviates clogging. This wellbore sensor includes
dual pressure containment to increase reliability. In addition, the
PT36XX is constructed with no external load-bearing welds thus
increasing service life and improving field serviceability. The PT36XX
is constructed of Inconel and 316 stainless steel. It can be configured
as a pressure only or temperature only unit. The standard unit
incorporates a 3 1/16 inch API flange although customers can specify
their flange of choice. Probe lengths are available in lengths of 3” to
24”. Both probe lengths and electrical terminations are
customer-specified. PT36XX is also available with dual redundant
pressure sensors for extremely demanding ... |
|
|
|
|
|
Electronic Pressure Measurement, WIKA
authors write about basics, applications and instrument selection |
| |
|
In
the renowned technical book series of the publisher “Verlag Moderne
Idustrie” a volume about electronic pressure measurement has been
released with the technical support of WIKA. The authors are
Eugen Gaßmann and Anna Gries. The book series from Süddeutscher Verlag
onpact/Verlag Moderne Industrie has striven over the past 20 years to
communicate, in a compact way, basic technical principles in conjunction
with the know-how of leading companies.The new title, "Electronic
Pressure Measurement", is already their 323rd volume. Eugen Gaßmann,
Head of Product Management in WIKA's TRONIC company division, and his
colleague Anna Gries give a comprehensive overview of basic principles,
instruments and typical applications in electronic pressure measurement
technology, before they offer a detailed set of ... |
|
|
|
|
|
Pressure sensor ATM.1st |
| |
|
STS
Sensor Technik Sirnach AG has once more proven its engineering and
production capabilities by launching this first class product. A
significantly more accurate pressure sensor to an attractive price is
now available on the market. Paired with existing STS product features
you will be able to benefit of the following key features: *
State-of-the-art technology with electronic compensation, * Smaller
dimension (25mm instead of 40mm), * Full modularity with all STS
pressure and electrical connections, * Active compensation as an option,
* Key certifications (ATEX, German Lloyds) available ... |
|
|
|
|
|
Differential pressure measurement with
even better zero-point accuracy |
| |
|
The
first dynamic digital differential pressure sensor from Sensirion,
the SDP600 series, was awaited with great anticipation. This was hardly
surprising, since the advance specifications of the small, fully
calibrated sensor included outstanding long-term stability and a short
response time along with high accuracy and sensitivity, even with very
small differential pressures (less than 10 Pa). Accumulated practical
experience with the sensor and test results now show that the
performance exceeds the high standard of the advance specifications. In
particular, the range of zero-point variation is three times less than
expected. The maximum deviation from the zero point was originally
specified as 0.5 Pa, but now it has been restated as 0.2 Pa. The SPD600
series also solidly fulfils its expectations with regard to reliability
and other specifications. With this, the new sensor achieves ... |
|
|
|
|
Find
all manufacturers and suppliers of
pressure sensors
pressure transmitters, pressure transducers,
pressure measurement devices |
|
|
Versatile Pressure Transmitter PBSN |
| |
|
With
the PBSN product, Baumer is introducing a new general purpose
pressure transmitter series. Thanks to their modularity, the devices
offer a high level of flexibility to suit customers’ exact application
needs. The sensor, which is based on Transbar technology with a thick
film ceramic measuring cell, is also suitable for applications with
aggressive media. The Baumer FlexProgrammer enables the transmitter’s
easy configuration. Modularly constructed, the PBSN pressure transmitter
series offers a flexible design to suit different customer needs,
ensuring that their pressure measurement applications are solved with an
accurate, reliable and cost-effective product. The Transbar
technology-based measuring cells are suitable for gauge as well as for
absolute pressure and cover a measuring range from 0…1 bar up to 0…600
bar. The standard accuracy is at 0.7%, or optionally 0.5%, of the full
scale. The thick film technology is based on a ceramic support material
for the pressure measuring cell. ... |
|
|
|
|
|
Pressure Switches now available with ATEX
approval |
| |
|
PEWATRON:
Since it is sometimes necessary to monitor pressures in areas exposed to
explosion hazards, the type 901 pressure switches by Beck and the type
930.8x differential pressure switches where subjected to a design type
test. As a result of these successful test, the pressure switches of the
901 series are now labelled II 1/2G Ex ia IIB T4 and suitable for use in
zones with potentially explosive atmospheres 0, 1 and 2, incl. gas
atmospheres, or are labelled II 2G Ex ia IIC T4 and suitable for use in
zones 1 and 2. The differential pressure switches of the series 930.8x
can also be used in gaseous atmospheres and have been awarded the ATEX
labelling II 2G Ex ia IIB T4. All devices have the ignition protection
type “intrinsic safety” and were graded as temperature class T4 and
explosion group IIB and IIC. With their certified design, the pressure
switches of the type 901 are convincing in ... |
|
|
|
|
|
Pressure Sensor Built to Survive with
Field-Replaceable Diaphragm |
| |
|
Stellar
Technology Inc’s Model GT100 is a robust, heavy duty pressure
transducer designed as a solution to severe applications like rocket
engine testing that can ruin a typical pressure sensor. Model GT100
features a cleanable pressure cavity and a stainless steel diaphragm
which can be replaced in the field as needed, renewing the sensor in
just a few minutes. The GT100 has a standard output of 3mV/V and
delivers linearity and hysteresis of 0.25% across pressure ranges from
150 psig to 20,000 psig. Exceptional thermal isolation ensures reliable
performance over an operating temperature of -100°F to +300°F. The
compensated temperature range is -30° to +170°F, which can be extended
to -65° to +250°F. This rugged stainless steel sensor has built-in
overpressure protection and low sensitivity to shock, vibration, and
thermal influence ... |
|
|
|
|
|
Kavlico Releases LPG & CNG Alternative
Fuel Pressure Sensors |
| |
|
Kavlico,
a global business unit of Custom Sensors & Technologies (CST) has
recently released a line of Liquified Petroleum Gas (LPG) and Compressed
Natural Gas (CNG) pressure sensors to support vehicles and industrial
equipment utilizing alternative fuels – a growing market around the
world. Alternative fuels are no longer a novelty but a bona fide
alternative to gasoline and diesel fuels. These fuel options are being
adopted by municipalities and other governmental agencies as an option
for fleet vehicles such as cars, buses, truck, and other service
vehicles such as fork lifts. Typical applications would include
monitoring and measuring low pressure for fuel rail, high pressure for
tank pressure, or combined pressure and temperature. The sensors are
utilized to optimize fuel metering and control combustion, improving
emissions and engine performance. The OEM will design in a Kavlico fuel
rail sensor to measure the absolute pressure of the fuel at the inlet of
the injectors. ... |
|
|
|
|
|
Hand-held pressure indicator now with
integrated pressure generation |
| |
|
With
the compact, new WIKA CPH6600 hand-held pressure indicator, a
pressure calibrator with an integrated pump is now available to users
within the process industries. Since an external hand pump is not
required, calibration tasks can now be carried out easier and quicker.
The new hand-held generates pressures of up to 10 bar with an integrated
electrical pump, manually up to 20 bar is possible. It operates with a
high accuracy of +- 0.025 % FS. The range of application of the new
CPH6600 is expandable, e.g. for pressures up to 700 bar, through the
connection of an appropriate external module. In addition, in
combination with a temperature sensor a simultaneous temperature
measurement is also possible with the calibrator. Additional functions,
such as pressure switch testing and ... |
|
|
|
|
Find
all manufacturers and suppliers of
pressure sensors
pressure transmitters, pressure transducers,
pressure measurement devices |
|
|
WIKA pressure transmitter C-2 - specifically for air compressors |
| |
|
WIKA
has developed the new C-2 pressure transmitter for pressure measurement
in screw-type, reciprocating and turbo compressors. It features a
particularly robust and compact design and an exceptional
price/performance ratio. With the C-2, compressor manufacturers and
manufacturers of measurement and control components for compressors will
get a high-quality pressure transmitter that is optimally matched to the
requirements of the market. Measuring ranges from 0 ... 6 up to 0 ... 60
bar, along with the established output signals and electrical
connections, meet the standards usual in the market. ... |
|
|
|
|
|
Miniature Pressure Transducer Features
Flush Diaphragm |
| |
|
Stellar
Technology Inc, offers the Model FT260 miniature pressure
transducer. This rugged all-welded stainless steel sensor features a
flush diaphragm which introduces zero dead volume to the fixturing to
resist the accumulation of residue that can clog traditional pressure
port configurations. The sensing element is machined from a single piece
of steel, insuring reliable operation in the most demanding
applications, including aerospace and automotive hydraulic pressures,
the application of sealants and paints, or any application where space
is at a premium. The FT260 is environmentally sealed and performs over a
range of -100° to 300° F (compensated: -65° to +250°F). Pressure ranges
are available from 0-2,000psi through 0-10,000psig/a. This compact
sensor weighs only 3.5 ounces, yet delivers a static accuracy of ±0.25%
(BFSL) and a standard output signal of 3 mV/V at 70°F. Burst pressure is
at least 3X FSO range ... |
|
|
|
|
|
PB Series pressure transmitters
– Maximum Flexibility due to Modularity |
| |
|
With
the PB series, Baumer is introducing a new pressure transmitter
family based on a modular system which can be adjusted individually to
customers’ needs. Remarkable is the high accuracy (of up to 0.1 % F.S.)
over a large compensated temperature range of -40 °C up to +85 °C. The
pressure range is between 100 mbar and 1600 bar. The FlexProgrammer 9701
enables the transmitter’s easy configuration. Four different sensor
technologies (capacitive ceramic, silicon piezo, thin film or ceramic
thick film) as well as a wide range of industrial process and electrical
connections are provided. The PB pressure transmitters offer high
accuracy, even in demanding outdoor applications like in hydraulic and
pneumatic, water treatment or the chemical industry. The measuring cells
are characterised by excellent long-term stability and outstanding
measuring performance in terms of linearity and hysteresis. With the
highest possible accuracy class, the total error band is just ±0.4 % F.S.
over the whole compensated temperature range. Mounted in a robust
stainless steel housing, the pressure sensors have ... |
|
|
|
|
|
In-Line Amplifier for DC Strain Gage Transducers |
| |
|
The
new Series AP5201 In-Line Amplifier from Stellar Technology is a
low cost, easy-to-use, general purpose signal conditioner. This single
channel unit is ideal for DC-excited strain gage pressure transducers,
load cells, and torque transducers. AP5201 features an advanced analog
design which solves the problem of measurement inaccuracy caused by high
electromechanical noise. The AP5201 provides filtered analog output of
±5Vdc, ±10Vdc, or 4-20 mA, which is field-selectable by the user. Zero
and span adjustments are made through coarse rotary switches and
potentiometers. This in-line amplifier will accommodate a wide range of
full-bridge DC strain gage sensors with bridge resistance for 120 to 10K
Ohm. The AP5201 signal conditioner can be placed in-line and away from
high temperature, high humidity, or corrosive environments that the
transducer itself may be exposed to, thus protecting the electronics
from severe conditions and ensuring reliable performance. The AP5201
in-line amp is also useful when mated to miniature and subminiature load
cells or pressure transducers which are too small to ... |
|
|
|
|
|
Shot Gun Shell Pressure Sensor Available with Long Life |
| |
|
The
Aerospace & Defense division of PCB Piezotronics, Inc. (PCB®) has
introduced a new charge output pressure sensor, Model 165B02, designed
expressly for measurement of internal ballistics of sporting, police,
and military Shot Guns. Ballistic pressure measurement is used to
improve/verify Shot Gun Shell propellant properties, peak pressure, burn
time, and performance of the gun. The sensors are design to conform to
the shot gun shell when mounted in universal receivers. The rugged
piezoelectric pressure sensors are structured with quartz sensing
elements and last thousands of rounds. Sensors are available with
full-scale measurement ranges to 30k psi (2070 bar) with over-range to
70k psi (5170 bar) and are calibrated according to Sporting Arms and
Manufacturers’ Institute, Inc. (SAAMI) and the Permanent International
Standards for the Proof of Small Arms (C.I.P.) standards. They feature
solid-state construction, no moving parts, high-strength steel housings,
and high frequency response. ... |
|
|
|
|
Find
all manufacturers and suppliers of
pressure sensors
pressure transmitters, pressure transducers,
pressure measurement devices |
|
|
Kavlico’s Common-Rail Pressure Sensor
Provides Improved Power & Torque for Diesel Engines |
| |
|
Kavlico,
a global business unit of Custom Sensors & Technologies (CST), has
designed a sensor to measure common-rail pressure in diesel engines. The
advantages of monitoring common rail pressure are many; including
increasing engine power & torque, improving fuel economy, reducing
engine noise, and improving vehicle drive-ability while creating cleaner
exhaust emissions. With today’s restrictive emissions standards, keeping
exhaust particulate emissions within the mandated levels is a must… and
Kavlico’s common-rail sensor is an essential element of the common-rail
injection system. Pressure is regulated and monitored by the Electronic
Diesel Control Unit (EDCU) which receives an electronic input from the
Kavlico pressure sensor. The sensor operates on 5 Vdc and provides a 0.5
to 4.5 Vdc linear amplified analog output proportional to pressure to
the EDCU. The highly accurate and ruggedly designed sensor uses a thin
film TiON sense element which provides highly reliable and repeatable
measurements. The cost-effective sensor is EMI/EMC protected, has low
power consumption, and is capable of operation in high vibration
environments. Fully temperature compensated across the entire
measurement range, the sensor has an operational temperature of ... |
|
|
|
|
|
Patented solution for diaphragm break
monitoring |
| |
|
WIKA:
For particularly reliable pressure measurement in critical processes
e.g. in the chemical, pharmaceutical and food industries, WIKA has
developed a solution which is now patented. The double diaphragm system
can, in the event of a diaphragm break, reliably prevent either products
finding their way into the environment or system fill fluid
contaminating the process. The diaphragm break monitoring for diaphragm
seals can be implemented on a wide range of instrument variants.
Detailed information is offered within the available WIKA flyer. ... |
|
|
|
|
|
Pressure transmitter now with SIL
evaluation |
| |
|
WIKA
has reacted immediately to the new safety standards within the process
and machine-building industries: The Model IS-2X intrinsically safe
pressure transmitter is now available with SIL 2 classification. In
order to enable the use of the IS-2X in SIL applications the most
important safety-relevant data have been determined and summarised in an
additional data sheet for safety-related data. These include the Average
Probability of Failure on Demand (PFDa), the Hardware Fault Tolerance (HFT)
and the Safe Failure Fraction (SFF). Process industry customers need
this information for a SIL evaluation of the complete scope of
application. For the requirements of machine building, MTTFd (Mean Time
To Dangerous Failure) values are provided in order to be able to
determine the Performance Level (PL). The versatile pressure
transmitters ... |
|
|
|
|
|
Digital Pressure Gauge Barflex for
Extreme Surroundings |
| |
|
With
the Barflex, Baumer offers a robust digital manometer with
integrated data memory. In the ATEX version Barflex 4Y, it is also
suitable for the use in rough and hazardous surroundings. It can measure
the gauge and absolute pressure of almost all liquid and gaseous media
in a range from 500 mbar to up to 1000 bar and with an accuracy of up to
0.1 % of full scale. Used as a barometer, the Barflex displays the
atmospheric pressure from 200 to 1150 hPa with an accuracy of 1 hPa. The
digital pressure gauge is housed in a splash water-proof Epoxy-coated
aluminium case and corresponds to the protection class IP65. It is
available in a stationary and portable version and is most suitable for
measurements on site. Via a standardized infrared interface, the
collected data can be transferred directly to a PC. The device
automatically memorises minimum and maximum pressures recallable at the
display. The measurement of pressure deviations in a given time interval
enables leak tests. In addition, the Barflex allows the calibration and
verification of the correct operation of the installed devices as well
as the verification of pressure switch and transmitter settings. ... |
|
|
|
|
|
GH15D – The new reference in M5 pressure
sensors for combustion analysis for bores down to 5.7mm |
| |
|
AVL
recently released the new pressure sensor GH15D which allows the most
precise measurements for combustion analysis with a sensor of its size.
The high performance of this front sealed mounted sensor is realized by
using thermally optimized piezoelectric elements and the special
Double-Shell design which decouples the piezoelectric elements from
negative influences of thermal expansion and other mechanical effects.
The connection between sensor and the piezoelectric cable is realized in
M3 size. This makes it possible that the sensor can be mounted into
bores down to 5.7mm. The sensor is equipped with sensor identification
(SID) which supports Sensor Data Management ... |
|
|
|
|
Find
all manufacturers and suppliers of
pressure sensors
pressure transmitters, pressure transducers,
pressure measurement devices |
|
|
Kavlico’s Exhaust Back-Pressure Sensors
Help Maximize Engine Performance |
| |
|
Kavlico,
a global company of Custom Sensors & Technologies (CST), has in their
portfolio, a line of emission sensors for measuring exhaust
back-pressure that aid in maximizing engine performance and efficiency.
Robust and highly reliable, these high accuracy sensors can withstand
operating temperatures of -15ºC to +125ºC. Protecting the engine from
damage due to over-pressure situations in systems with or without a
Diesel Particulate Filter (DPF), Kavlico’s EBP sensors provide vital
diagnostic information to the Engine Control Unit (ECU) for regeneration
of the DPF. Kavlico’s proprietary ASIC architecture, calibration, and
compensation methods, along with the ceramic capacitive sense element
make these sensors an ideal fit for operation in the exhaust environment
where there is severe vibration and caustic soot and acids. The sensors
feature stainless steel housings and operate on 5 Vdc power supply,
providing a linear amplified analog output of 0.5 to 4.5Vdc proportional
to pressure. The available pressure ranges are (0 - 5.80 and 0 - 7.975
PSIG or 0 - 400 mBar and 0 - 500 mBar). The low power consumption,
humidity tolerant sensors are also EMI/EMC protected, exhibit low
hysteresis, and also ... |
|
|
|
|
|
Melt Pressure Sensor for Higher Precision in Measuring Nozzle Pressure |
| |
|
Kistler:
Melt pressure in front of the screw of injection molding machines is an
important process parameter. Machine control is critically dependent on
its precise measurement. This is because injection molding components
can only be kept within extremely tight tolerances if this pressure can
be accurately and repeatably measured and recorded over an extended
period of time. The new melt pressure sensor Type 4021A... from Kistler
is a groundbreaking new development based on the piezoresistive
principle of measurement. It measures the important machine parameter
directly in the area in front of the screw with reproducibility errors
of <0,1 %, a linearity error of <0,5 % and a zero point change of <0,5
%. The sensor with a flat seal is supplied as a complete measuring chain
with a new amplifier that also has an output for the melt temperature.
The new melt pressure measuring chain is available for measuring ranges
of 0 ... 100, 0 ... 500, 0 ... 1 000, 0 ... 2 000 and 0 ... 3 000 bar,
and can be used at temperatures of up to 350 °C. Angled or straight
cable exits and a connector version allow it to be used on machines
presenting a wide variety of mounting situations ... |
|
|
|
|
|
Our technology makes the difference,
Quality improvement of monolithic and flush mounted piezo resistive
ceramic pressure sensors through increased long term stability and
moisture resistance |
| |
|
Metallux
AG: Through innovative measures, long term stability and moisture
resistance of pressure sensors can be increased. The new improved
generation of pressure sensors benefits on the one side from results of
modern measurements- and calculation tools as well as through marked
improvements in the screen print technology and better algorithm during
the laser trimming process. Metallux AG, a leading manufacturer of piezo
resistive pressure sensors was thus able to improve the quality of their
pressure sensors considerably. Current situation: Conventional
manufacturing process of piezo resistive ceramic pressure sensors.
Piezoresistive pressure sensors are manufactured through a screen print
process. A Wheatstone bridge is printed onto a thin membrane and burned
in at 850°C. After the firing process the offset of the bridge needs to
be compensated. For this resistors are integrated in the bridge, which
are aligned through laser trimming. These laser trimmed resistors are
however a reason for instabilities ... |
|
|
|
|
|
Rugged Temperature and Pressure Switches
for Nuclear Power Stations |
| |
|
With
the series ZPN, ZDPN and ZT, Baumer offers very robust
temperature and pressure
switches developed especially for the use in nuclear
power stations. The pressure switches are suitable for pneumatic or
hydraulic control, for power generation safety equipments and for
pressurized chambers control. They are resistant to short duration
overpressure and show a good vibration resistance. The ZPN can measure a
gauge pressure from -1 bar up to 600 bar with a very small intermediate
range from -2 mbar up to 10 mbar. The ZDPN measures a differential
pressure from 2 mbar up to 120 bar. The pressure switches maintain a
constant pressure around a chosen set value. When the pressure reaches a
critical pre-set value, they trigger an alarm or safety system. A
flexible diaphragm actuates a micro-switch via a piston. The set point
adjustment is realised via a compressible spring mounted on the
opposite. Due to the force-balance principle, the dead band setting
remains constant, even with different set point adjustments. With rapid
pressure variations, an attenuator should be used to prevent a temporary
on- and off-switching. The ZT temperature switches are suitable for ... |
|
|
|
|
|
Kavlico Publishes Four New Data Sheets
for Aerospace Pressure Sensors |
| |
|
Kavlico,
a global business unit of Custom Sensors & Technologies (CST) has just
published four Data Sheets for their recently designed line of aerospace
grade pressure sensor products. Each Data Sheet Includes: * Product
Description, * Significant Product Features, * Typical Applications, *
Technical Specifications, * Dimensional Drawings. The Data Sheets are
available as downloadable PDF files in the Kavlico Resource Center. * PX
Model - Low Differential Pressure Sensor, * PX Model - High Pressure
Sensor, * PX Model - PRT-Based Pressure Sensor for Hydraulics, * PX
Model - PRT-Based Pressure Sensor (Mid-Range Gage & Absolute Pressure).
Kavlico aerospace grade pressure sensors are fully custom designed for
OEM’s application-specific requirements; the data sheets are to be used
as reference for Kavlico’s technical capabilities and potential sensor
configurations. For more information about Kavlico pressure sensor
solutions ... |
|
|
|
|
Find
all manufacturers and suppliers of
pressure sensors
pressure transmitters, pressure transducers,
pressure measurement devices |
|
|
Monobloc pressure transducer measures up
to 3000 bar |
| |
|
HBM’s
latest, compact P3IC-series of pressure transducers are ideal for
measuring static and dynamic pressures with measuring ranges from 10 to
3000 bar. The transducers feature a measuring body finished from a
continuous piece of steel with no welded seams making them highly
suitable for general industrial applications. The P3IC pressure
transducer provides excellent precision and durability and is available
in high accuracy classes from 0.1 to 0.2. Industrial class pressure
transducers in the range are available with either standard M12
connection techniques as the P3ICP version or with fixed cable in the
standard P3IC version. Compensation for the effect of residual external
temperature errors is achieved by using the integrated PT100 temperature
sensor. The transducer can ... |
|
|
|
|
|
Quality internationally confirmed:
Pressure switch receives UL seal of approval |
| |
|
The
technical quality and the safety of the new WIKA PSD-30 pressure
switch have literally been sealed: The instrument has now been awarded
the globally recognised cULus certification. UL Underwriters
Laboratories Inc.®, one of the leading certification businesses for
product safety worldwide, with its headquarters in the USA, has tested
the pressure switch to the applicable US American and Canadian
standards. The PSD-30 was tested for such things as pressure strength
and ingress protection in installation conditions. Through the UL
quality assessment for the new switch, it will be considerably easier
for customers to achieve regional approvals. WIKA offers the
high-functionality, yet simple-to-use, PSD-30 in several
country-specific versions. ... |
|
|
|
|
|
Process pressure and differential pressure transmitters for "sterile"
applications |
| |
|
WIKA
has expanded its comprehensive range of solutions for hygienic
measurement requirements: The tried and tested IPT-1X process pressure
transmitters and the new DPT-10 differential pressure transmitters are
now available with housings in electropolished stainless steel in
combination with sterile process connections. With the model IPT-11
flush diaphragm process transmitters, which are available with
fully-welded metallic measuring cells as well as with dry ceramic
measuring cells, a large number of directly-mounted hygienic process
connections can be selected. The model IPT-10 process transmitters and
the model DPT-10 differential pressure transmitters can likewise be used
in combination with diaphragm seals or diaphragm in-line seals. The
connection to the diaphragm seals can be made directly or via a
capillary extension. ... |
|
|
|
|
|
Piezoresistive steel-pressure sensors allow a wide pressure range of
up to 1.000 bar |
| |
|
A
new generation of stainless-steel piezoresistive pressure sensors has
been introduced by Metallux AG as series SPS 3000/3001. Next to
the classical monolithic standard type, these sensors offer a
process-connection which is directly integrated with the sensor. The
o-ring, due to this direct connection, falls away. The pressure range is
therefore increased. A pressure range of up to 1000 bar with a high
burst pressure is possible. This makes it possible for use in numerous
applications as for example in refrigeration engineering, hydraulics,
automation technology and machine construction. Metallux AG offers their
customers, apart from a wide standard range, custom specific solutions ... |
|
|
|
|
|
Interference-resistant pressure
transmitters |
| |
|
Keller
AG für Druckmesstechnik, has implemented a new concept for
temperature compensation and for protection from electromagnetic fields
(EMC) in the recently approved Series 21 Y pressure transmitters. With
measuring ranges between 2 bar and 1000 bar, the Series 21 Y
transmitters can be used at temperatures ranging from -20 °C to +100 °C
in any industrial application, even in the immediate proximity of
frequency converters. Particular attention has been paid to providing
low-cost calibration that guarantees a maximum Total Error Band of ±1.5
%FS over the entire standard temperature range of -10 °C to +80 °C.
Extensive data collection, such as that required by polynomial
correction schemes, is replaced by a much simpler, costeffective method.
The temperature range is divided into as many as 120 subdivisions, of
1.5 Kelvin each, by an integrated temperature sensor and an additional
digital circuit. The compensation values for TK zero point and TK
amplification for each of these subdivisions are calculated individually
in accordance with a mathematical model and stored in the transmitter.
These values are fed into the analogue signal path during operation
depending on the temperature, without having to reduce the 2 kHz
bandwidth. Series 21 Y transmitters are ... |
|
|
|
|
Find
all manufacturers and suppliers of
pressure sensors
pressure transmitters, pressure transducers,
pressure measurement devices |
|
|
Robust Pressure Transmitter for
Aeronautical Equipment |
| |
|
A
new pressure transmitter especially for aeronautical applications has
been developed by Baumer’s product segment Process
Instrumentation. Completely made of stainless steel, the compact device
meets the high requirements for the use in aviation operations and can
be deployed for the pressure measurement of most gases and liquids. The
transmitter for aeronautic applications is resistant to any harsh
conditions due to temperature, altitude, humidity, salt spray, sand and
dust, rain, contaminants, vibrations or shocks and offers a high
electromagnetic compatibility (EMC). The sensor based on thin film
technology is able to measure a pressure range from 0 to 250 bar and
constructed for an overpressure of up to 315 bar. The burst pressure is
at 470 bar. Within a temperature range of -40°C to +120°C, the accuracy
is ±1.25% of the measuring span. The transmitter has a 1…5 Volt output
signal and a supply voltage of 10 Volt. Weighing less than 125 g, the
device is very compact. Baumer developed the transmitter for ... |
|
|
|
|
|
GU24D – The new AVL uncooled M8 pressure
sensor for combustion analysis without limits |
| |
|
AVL
recently released the new pressure sensor GU24D which allows the most
precise measurements for combustion analysis with a sensor of its size.
The high performance of this shoulder sealed mounted sensor is realized
by using thermally optimized piezoelectric elements and the special AVL
Double-ShellTM design which decouples the piezoelectric elements from
negative influences of thermal expansion and other mechanical effects.
The pressure sensor GU24D is equipped with AVL’s IEEE 1451 fulfilling
sensor identification which supports AVL SensorDataManagementTM (SDM). ... |
|
|
|
|
|
Enormous surge in demand for the A-10
compact pressure transmitter |
| |
|
WIKA
has observed an exceptional surge in demand for its A-10 compact
pressure transmitter: Compared to the 2nd quarter of 2009 the volume of
orders has already grown by over 50 percent. WIKA attributes this
success, during this time of 'crisis', to the outstanding
price/performance ratio achieved through the simple design and the "lean
manufacturing". With the highly versatile A-10, which represents a new
generation of pressure transmitters, users in many areas of industry can
achieve large savings. At the beginning of August WIKA introduced two
shift production for the A-10, and in the light of this ... |
|
|
|
|
|
Kavlico Introduces Multi-Purpose High
Performance OEM Pressure Sensor |
| |
|
Kavlico,
a global business unit of Custom Sensors & Technologies (CST) is pleased
to announce the availability of their 4th generation ceramic capacitive
pressure sensor, the model P500 which is packaged with Kavlico’s
state-of-the-art ASIC. Rugged and highly reliable, this multi-purpose
sensor is ideal for measuring a broad range of process media including
hydrocarbon based fluids, air, and water. Typical industrial pressure
sensor applications include: * Pumps (Water Pressure), * Suction and
Discharge Pressure in Stationary and Portable Compressors, * Process
Controls (Fluid & Gas Pressures), * Scientific Instruments
(Spectrometers and Chromatography Analysis Equipment), * Test Equipment,
* Stem Sterilizers, * Air Pressure. Typical transportation applications
include: * Oil & Fuel Pressure, * Coolant Pressure, * Agricultural
Equipment, * CNG & Natural Gas Engines, The extremely compact sensor ... |
|
|
|
|
|
Diaphragm seals: New solutions for homogenization processes |
| |
|
WIKA
has developed the diaphragm seal model 999.30 especially for homogenizer
applications. This high-quality product is now available in combination
with an intelliGAUGE series mechatronic pressure gauge (PGT 23.100) or
the new pressure switch PSD-30. The complex design of the diaphragm seal
is tailor-made for the extremely dynamic homogenization processes. The
damped instrument is designed for a static pressure of up to 2,500 bar.
Its high load capacity guarantees a robust and durable measuring
assembly. With the PSD-30, in combination with the diaphragm seal, a
highly functional pressure switch is available also for homogenization
processes for measuring ranges up to 600 bar. The compact instrument is
easily mounted and is simple to operate via three keys and an intuitive
menu navigation. The large LED display ... |
|
|
|
|
Find
all manufacturers and suppliers of
pressure sensors
pressure transmitters, pressure transducers,
pressure measurement devices |
|
|
Kavlico Introduces Low Range Dual Channel
High Pressure Sensor for Aircraft Hydraulic & Fuel Systems |
| |
|
Kavlico,
a global business unit of Custom Sensors & Technologies (CST) has
recently introduced a highly reliable dual channel pressure sensor that
can measure pressures up to 4,000 PSIA or 275 Bar. The lightweight (6.5
oz. max.) aluminum housing has been designed to minimize weight; while
the small footprint reduces installation time as only one sensor is now
required for two measurements. With only one dual channel sensor to
install vs. two single channel sensors, cabling requirements and costs
are reduced resulting in a cost-effective sensing solution. Utilizing
Kavlico’s media isolated, oil-filled, piezo-resistive (PRT) sensing
technology, the senor is capable of operation in harsh, flight critical
environments with a typical MTBF of 300,000 hours at nominal operating
temperatures. Each of the channel pressures are independent of one
another, allowing the channels to be calibrated with different pressure
outputs for each based upon the application-specific requirement of the
aircraft platform. Burst pressure is ... |
|
|
|
|
|
WIKA is nominated for the Design Award of
the Federal Republic of Germany |
| |
|
The
acclaimed design of the new PSD-30 Pressure Switch Generation from
WIKA has already been recognised by winning at the 2009 iF product
design awards. Now the pressure switch has been nominated by the
Bavarian Ministry of Economic Affairs for the Design Award of the
Federal Republic of Germany 2010. The Design Award of the Federal
Republic of Germany is the highest official German award in the design
arena. The “Prize of Prizes” is offered by the Federal Ministry for
Economics and Technology. The requirements that this design award
demands of its participants are considerably higher than those for other
design competitions. The prize was initially awarded in 1969 under the
title “Federal Award for Good Design” for international outstanding
achievement in the area of product design. Since 2006 it has been
awarded each year under the title "Design Award of the Federal Republic
of Germany" for prominent performance in the area of Product and
Communication Design. ... |
|
|
|
|
|
Mechatronic pressure gauges now also in
filled and hermetically sealed versions |
| |
|
WIKA
has extended the performance range of its mechatronic pressure gauges of
the intelliGAUGE series. Products of the PGT23.063 series are now also
available in the filled and/or hermetically sealed versions per IP65.
Both options are suitable for the use in mainly rough operating
conditions. The hybrid instrument is a combination of a pressure gauge
(nominal size 63) and an electrical output signal (4 ... 20 mA). The
version filled with silicone oil eliminates undesired pointer
oscillations. Even in case of vibrations or strong fluctuations in
pressure, the instrument provides reliable measurement results. The
electrical assembly is not complicated. The selected angled connector of
the 718 Binder connector series is equipped with a simple and
long-lasting threaded locking system. In addition, the connector is
moulded at the cable and therefore meets the requirements regarding ... |
|
|
|
|
|
GH14D – The new reference in M5 pressure
sensors for combustion analysis |
| |
|
AVL
recently released the new pressure sensor GH14D which allows the most
precise measurements for combustion analysis with a sensor of its size.
The high performance of this front sealed mounted sensor is realized by
using thermally optimized piezoelectric elements and the special AVL
Double-ShellTM design which decouples the piezoelectric elements from
negative influences of thermal expansion and other mechanical effects. A
version with a modified membrane structure is available as well which is
called GH14DK. It allows maximum pressures of up to 300 bar. This makes
the GH14DK very rigid and still accurate even under severe knocking
conditions. Both sensors ... |
|
|
|
|
|
Kavlico’s P528 OEM Pressure Sensor
Incorporates an Integral Schrader Deflator Process Fitting for
Refrigeration Applications |
| |
|
Kavlico,
a global business unit of Custom Sensors & Technologies (CST) has
recently added the P528 OEM Refrigeration Pressure Sensor with a ¼ SAE
Female Flare, Schrader Deflator with 7/16-20 UNF internal threads to
their P528 family of sensors. This sensor which incorporates Kavlico’s
4th generation ceramic capacitive sensing technology has been
specifically engineered for high volume OEM refrigeration applications.
Packaged in a brass or plated steel housing, the sensor can endure the
high vibration, broad temperature ranges, and high humidity conditions
found in refrigeration systems while withstanding high over-pressures
and pressure pulsations without damage or degradation. Pressure ranges
available are from 0-100 through 0-750 PSI absolute and sealed gage.
Typical refrigeration applications include: * High and Low Side Pressure
Measurements in Refrigeration Systems, * Product Refrigeration, *
Transport Refrigeration, * Refrigerant Recovery, * Environmental Test
Equipment ... |
|
|
|
|
Find
all manufacturers and suppliers of
pressure sensors
pressure transmitters, pressure transducers,
pressure measurement devices |
|
|
Series DCX 16 Level Probes - Autonomous
Data Collectors with Ø 16 mm |
| |
|
KELLER
AG:
Level measurement: 1.5 billion people around the globe have no access to clean
water. Managing water as a resource is therefore the challenge of the
21st century. A significant part of the world’s water resources is
located underground. Large areas are surveyed using
pressure sensors to
monitor changes in the water level in relation to usage as well as
rainfall. These sensors are inserted in wells up to 200 m in depth. The
major share of the cost of a measuring point is caused by the drilling
operation and the pipe inserted into the earth. Until now, pipes with an
inner diameter of 1 inch (2,54 cm) were mainly used, required by 22 mm
diameter sensors. KELLER’s new DCX-16 features ... |
|
|
|
|
|
"Pressure transmitter A-10 for applications with vacuum" |
| |
|
The
WIKA pressure transmitter A-10 is also excellently suited for
applications where negative pressures are measured. Thus the
high-quality and cost-efficient A-10 can be used e.g. for filter
monitoring, pump control, vacuum lift technology or gas analysis. It is
also a reliable and economical solution for applications which do not
allow for measurements in the vacuum but for which a vacuum may occur.
The vacuum measuring ranges from -1 ... 0 bar to -1 ... +24 bar are of
course available in all common international units. ... |
|
|
|
|
|
First pressure transmitter for mobile
hydraulic applications which fulfills new safety standards |
| |
|
MHS-1
is the first pressure transmitter launched on the market by WIKA
which fulfills already now the new EC Machinery Directive that will come
into effect soon. It was especially developed for safety-critical mobile
hydraulic applications. All over the world, there is a trend to increase
the safety standards for the protection of human beings and the
environment. This is also applicable for the mobile hydraulics sector.
For this reason, the new EC Machinery Directive (2006/42/EC) - and
together with this directive, the safety standards EN ISO 13849-1
(Performance Level, PL) and IEC 61508 (Safety Integrity Level, SIL2) -
will become effective at the end of this year. In accordance with these
new standards, WIKA has developed a special pressure transmitter for
load monitoring, brake monitoring and drive control to be used in
commercial vehicles. Essential product features are a redundant
measurement of pressure and signal processing as well as two output
signals working independently of each other (4 … 20 mA, 2-channel) in a
single instrument. Therefore, the MHS-1 has extraordinarily space-saving
dimensions and the installation can be done in a shorter time compared
to the use of two pressure transmitters. ... |
|
|
|
|
|
Latest transducer meets high pressure
challenges |
| |
|
The
latest P2V compact high pressure transducers from HBM have
excellent measuring properties at up to 5 000 bar that are needed, for
example, in water-jet cutting systems. The P2V is suitable for measuring
both static and dynamic pressures with a measurement accuracy at 0.3 per
cent at 5,000 bar and 0.2 per cent in lower range models. Dynamic
pressure characteristics can be very precisely defined because of the
high measuring frequency of 4.5 kHz. The P2V’s precision can markedly
improve the dimensional accuracy of work pieces. The measuring body is
finished from a continuous piece of steel with no welded seams making
the transducers extremely robust and reliable with a long service life.
The P2V pressure transducers are available for nominal (rated) pressures
of 0...100 bar up to 0...5,000 bar. A high-quality, low-noise DC
amplifier is directly integrated in the transducer, available either
with a voltage output (0.5...10 V) or a current output (4...20 mA). The
P2V supports Transducer Electronic Data Sheet ... |
|
|
|
|
|
Miniature Titanium Pressure Sensor
Available with USB Output |
| |
|
FUTEK
Advanced Sensor Technology, Inc. (FUTEK) has just added the PMP941
Miniature Pressure Sensor to their USB Sensor Solution Line. The new
module with USB output eliminates the need for an analog amplifier,
power supply, and display equipment making usage that much easier. The
plug and play gives you power to monitor the output of the sensor and
enjoy measurement that is less affected by noise, temperature variation
or power supply requirement. The USB integration also includes FUTEK’s
USB Software which allows users to monitor the output of the Sensor in
real time. The PMP941 Pressure Sensor is fit for several industrial
applications and can withstand the harshest environments. The small size
and lightweight, titanium design makes it ideal for tough vibration and
shock environments, resistant to extreme temperatures, and ideal for
corrosive fluid environments. This mini Pressure Sensor is recommended
for applications involving rough handling or where a completely
hermetically sealed transducer is required. All subsea applications such
as Remotely Operated Underwater Vehicles - ROV’s, and Subsea Christmas
Trees as well as Offshore Testing, Fossil Fuel Exploration and Cargo
Level Gauging are suitable for the PMP941. This particular sensor is an
Ultra Miniature Pressure Sensor made of all titanium construction with a
small mass molded cable. ... |
|
|
|
|
Find
all manufacturers and suppliers of
pressure sensors
pressure transmitters, pressure transducers,
pressure measurement devices |
|
|
Kavlico Air & Fuel Filter Restriction
Pressure Sensors Help Heavy Duty Truck & Bus Engines Run More
Efficiently |
| |
|
Kavlico,
a global business unit of Custom Sensors & Technologies (CST) has
released two pressure sensors for the heavy-duty truck and bus market
sector which assist in optimizing engine performance. Kavlico’s air
filter and oil filter restriction pressure sensors assist systems that
monitor filter life and performance. Good filter condition is important
for engines to run cleanly and efficiently. Precisely measuring and
mixing the correct amounts of air and fuel is a critical element in
modern internal combustion engines. When an air filter or fuel filter
becomes clogged the ratio of air-to-fuel can be compromised. When an air
filter becomes obstructed an engine can receive too much fuel in
proportion to air, causing the engine to run “rich”. Running rich
decreases efficiency and can release unburned hydrocarbons into the
exhaust stream as a result of incomplete combustion. The opposite is
true when a fuel filter becomes clogged. In this situation an engine can
be forced to run on too “lean” a mixture. This can decrease power and
potentially cause engine damage. To avoid these conditions, Kavlico air
and fuel filter sensors can be used to help monitor filter life and
performance. This can help engines complete the combustion process more
efficiently and cleanly. Fuel filter restriction sensors often measure
in the -10 to 0 psig range while air filter restriction sensors can
monitor even smaller pressure deltas such as -1.5 to 0 psig. ... |
|
|
|
|
|
Differential Pressure Transmitter DPT-10 from WIKA |
| |
|
A
new, cost-effective solution for a wide range of applications
encompassing differential pressure, level and flow measurements, the
differential pressure transmitter DPT-10 has been presented by WIKA
at ACHEMA 2009. This new development, which will be available in the 4th
quarter of 2009, stands out through its simple on-site operation -
especially for users unfamiliar with it – and also through its ability
to fit optimally in a range of installation situations. The DPT-10 is
available with a case in a single or a double chamber design. The
optional display and control module can therefore be fitted on the top
or on the side, depending upon the installation conditions. A choice of
plastic, aluminium or electropolished or cast stainless steel is
available for case materials. For explosion protection there are either
“intrinsically safe” or flameproof case variants available. The DPT-10
differential pressure transmitter is available with all the usual
process instrumentation ... |
|
|
|
|
|
WIKA presents solutions for the renewable
energies market |
| |
|
In
its latest brochure, the Klingenberg company WIKA presents itself
as a professional partner in the renewable energies market. Pressure and
temperature monitoring are valuable in all plants producing renewable
energy. WIKA illustrates this with examples of six kinds of this energy;
wind power, water power, solar thermal, photovoltaic, biogas and
geothermal. In many plants the systems used for pressure and temperature
monitoring are as reliable as they are precise; the control loops driven
with their assistance are nearly always critical for
environmentally-sound, efficient and effective power production. Apart
from high accuracy and reliability under harsh working conditions, these
power production plants also have a particular need for economical
solutions. All of these requirements can be fulfilled by WIKA
manufacturers, currently operating worldwide and on all continents. ... |
|
|
|
|
|
Kavlico Combined Temperature & Pressure
Sensors Provide Measurement Solutions Aboard Aircraft & Ground Support
Vehicles |
| |
|
Kavlico,
a global business unit of Custom Sensors & Technologies (CST) has
recently released a combined temperature & pressure sensor intended for
use in monitoring hydraulic systems aboard aircraft and on ground
support vehicles. Ideal for harsh environments with extreme temperature
fluctuations, high vibration, humidity, and active chemical attack;
these compact sensors provide a reliable and accurate measurement
solution. Due to their small form factor, the sensors are well-suited
for active control systems, system status, and health monitoring.
Typical applications include: * Distributed hydraulic power-by-wire, *
Actuator control, * Force fight monitor and control, * Feedback control
of power drive systems. Available in pressures ranges of 0-500 through
0-10,000 PSIA (0-30 to 0-700 Bar), the sensors have an operational
temperature range of -55 to +125ºC with an isolated thermowell. The
lightweight sensors (<6.5oz.) have a stainless steel housing and are
supplied with a Mil-38999 style connector, with additional
configurations available. Operating on 5 to 15 Vdc with higher range
options, the sensors can be configured with an amplified (0.5 to 4.5 Vdc)
or non-amplified (50 to 100 mV at 10 Vdc excitation) output. Sensor
accuracy is ... |
|
|
|
|
|
Pressure switch generation with excellent functionality |
| |
|
WIKA
presents PSD-30 - a new generation of electronic pressure switches. This
innovative instrument has already gained recognition among experts: It
has been awarded with the iF product design award 2009. The new pressure
switch convinces thanks to high functionality and easy handling. The
3-key handling with tactile feedback guarantees a trouble-free setup
without tools. An easy menu structure according to the VDMA standard and
useful functions, such as an "INFO" button, allow intuitive handling by
the user and a quick check of the set parameters by just pressing a
single button. A large 14-segment display in robust LED technology with
a digit height of 9 mm makes it very easy to read, in particular
alphanumeric messages. The compact pressure switch can be adapted
flexibly to the installation site due to its independently rotatable
display and M12 connection. Furthermore, the display can be turned
electronically by 180°. PSD-30 can be delivered in several
country-specific versions with regard to measuring ranges, process
connections and signals. Therefore, it can be used world-wide. For
further information regarding the new pressure switch ... |
|
|
|
|
Find
all manufacturers and suppliers of
pressure sensors
pressure transmitters, pressure transducers,
pressure measurement devices |
|
|
Kavlico Designs Pressure Sensor for Heat
Pump Systems Meeting EU 842/2006 Directive |
| |
|
Kavlico,
a global business unit of Custom Sensors & Technologies (CST) has
developed a new version of the PT250 pressure transmitter designed
specifically for installation in heat pump systems. Incorporating a
piezo-resistive sense element, these extremely rugged, all-welded, 304L
stainless steel constructed devices have an integral pipe pressure
connection that is welded at the pressure source. According to EU
842/2006, heat pump applications using fluorinated greenhouse gases must
be checked for leakage at least once every 12 months or every 6 months
depending upon the gas quantity they contain. However, the directive
shall not apply to equipment with hermetically sealed systems. The PT250
from Kavlico does not utilize a gasket thereby complying with the EU
842/2006 directive. By installing a PT250 transmitter in the heat pump
system, a significant cost-savings is achieved by no longer having to
monitor leakage rates, a big plus for the end-user. Heat pumps will make
a major contribution toward Europe meeting its climate and energy
challenges for renewable heating and cooling technology, and Kavlico’s
newly designed transmitter will assist with this “GREEN”, efficient
energy solution ... |
|
|
|
|
|
Pressure transmitter P-30, Precise, fast
and compact |
| |
|
When using pressure transmitters for precision measurements, users often
had to compromise depending on the priority of the requirements. The new
P-30 from WIKA now combines the three most important
characteristics of its instrument category: This product, which has been
presented for the first time at the INTERKAMA+ 2009 fair, is highly
precise, very fast and at the same time very compact. For the
development of this new pressure transmitter, WIKA looked at the
requirements of engine test bench technology in the automotive sector.
In these test benches, a quick data acquisition and analysis plays a
more and more important role in the tests for optimising the power
trains. The used measuring instruments must therefore fulfil high
demands with regard to accuracy and measuring rate. The P-30 transmitter
is characterised by a high precision with active temperature
compensation. Its fast measuring rate - up to 1 ms - allows a data
acquisition of up to 1 kHz. The new pressure transmitter works with an
accuracy of up to 0.1 % without additional temperature error in a range
of 0 ... 50 ºC. Excellent values with regard to the non-linearity of the
characteristic curve and its long-term stability can be added. WIKA has
concentrated this high measuring quality of the P-30 in very little
space. In comparison with its predecessor P-10, the size of the new
instrument has been reduced by 30%. Thanks to its compact and robust
design, the pressure transmitter can be ... |
|
|
|
|
|
The new CPG1000 precision digital
pressure gauge sets standards for accuracy and ease-of-use |
| |
|
With
the new CPG1000 precision digital pressure gauge, WIKA has
expanded its range of precision pressure measuring instruments. A high
accuracy of ±0.05 % of span and particularly easy operation make this
instrument equally suited to testing and calibration. The CPG1000 unites
the concept and the comprehensibility of an analogue pressure gauge with
the high level of a digital calibration instrument. With its stainless
steel case, encased in a heavy-duty plastic protective boot, the CPG1000
is extraordinarily robust and resilient. The large 5½-digit display with
selectable backlighting makes the instrument ideal for use on site or in
the process. The clear arrangement of the function keys and the
structured menu navigation makes it remarkably easy to use. An RS232
connection and various additional operator functions, such as MIN-/MAX
memory, TARE or Filter, ... |
|
|
|
|
|
Miniature Pressure Sensor Available with
USB Output |
| |
|
FUTEK
Advanced Sensor Technology, Inc. (FUTEK) has just added the PMP941
Miniature Pressure Sensor to their USB Sensor Solution Line. The new
module with USB output eliminates the need for an analog amplifier,
power supply, and display equipment making usage that much easier. The
plug and play gives you power to monitor the output of the sensor and
enjoy measurement that is less affected by noise, temperature variation
or power supply requirement. The USB integration also includes FUTEK’s
USB Software which allows users to monitor the output of the Sensor in
real time. The PMP941 Pressure Sensor is an Ultra Miniature Pressure
Sensor made of all titanium construction. This Pressure Sensor is made
for harsh environments capable of sustaining the most corrosive and
industrial applications. The PMP941 is made of a miniature and ultra
light design weighing < 10g. This small sized transducer provides high
performance with an output of 5V DC from a 5V DC +/- 10Mv supply. Input
pressure range is 73 PSI up to 5800 PSI, withstanding vibrations of up
to 50g at up to 20-2000Hz. The PMP series Subminiature Pressure
Transducers are manufactured from one piece of all titanium ... |
|
|
|
|
|
Hydraulic Impulse Calibrator for Dynamic
Pressure Sensors |
| |
|
Model
913B02 Hydraulic Impulse Calibrator from PCB Piezotronics, Inc.
provides dynamic field or laboratory calibration of piezoelectric
pressure sensors. PCB® Model 913B02 is a hydraulic impulse calibrator
that uses a drop mass on a piston to create half-sine pulses. The piston
acts on a hydraulic fluid filled cylinder for comparison calibration of
dynamic pressure sensors against a PCB® Model 136A tourmaline transfer
standard. The hydraulic cylinder is fitted with the tourmaline transfer
standard and has an opposing mounting port for the sensor under test (SUT).
Typical performance specifications are 2-3 millisecond rise time with a
pulse duration of about 5-6 milliseconds. PCB® Model 136A transfer
standard is a linear volumetric tourmaline pressure sensor designed to
accurately measure rapidly changing hydraulic pressures to 20,000 psi.
It is structured with a single tourmaline crystal, precisely suspended
between two steel supports. Since there is no diaphragm or housing to
affect the linearity of the tourmaline crystal, this sensor makes an
excellent calibration transfer standard for use in impulse-type ... |
|
|
|
|
Find
all manufacturers and suppliers of
pressure sensors
pressure transmitters, pressure transducers,
pressure measurement devices |
|
|
WIKA Brochure: Products and
application information for sanitary applications |
| |
|
WIKA
has published a new information brochure for pressure and temperature
measurement in sanitary applications. For the first time it shows the
entire WIKA product offering for this market segment and, in addition,
offers users additional useful information. All WIKA products in the new
brochure are listed clearly and in detail. Illustrations of the various
mounting possibilities for measuring instruments give the user an
overview of hygienic process instrumentation. In addition you can find
detailed technical information, including material compositions, pipe
standards and conversion factor tables for both pressure and
temperature. . ... |
|
|
|
|
|
SA-11 pressure transmitter, now also
available with Neumo BioControl ® process connection |
| |
|
WIKA:
The SA-11 aseptic pressure transmitter from WIKA is now also available
with Neumo BioControl process connection. It therefore offers all
possibilities of dead space free instrumentation: alongside the
BioControl, there are also clamp, threaded and connections to DIN
11864-1. With this, and pressure ranges from 0…250 mbar to 0…25 bar, it
ideally satisfies the high requirements of sanitary applications. The
SA-11 pressure transmitter was specifically developed for applications
in the food and beverage industry as well as for pharmaceuticals and
biotechnology. It is certified to EHEDG and fulfils the 3-A Sanitary
Standards, while the pressure transmission fluid also conforms to FDA
requirements. The Neumo BioControl® system has proven itself to be a
particularly flexible solution, as it can be used in piping systems and
vessels for fitting both pressure and temperature measuring instruments.
A further advantage is ... |
|
|
|
|
|
Kavlico Designs Differential Pressure
Sensors for Turbine Inlet Filter Pressure Health Monitoring |
| |
|
Kavlico,
a global business unit of Custom Sensors & Technologies (CST) has
recently introduced a rugged aerospace grade differential pressure (DP)
sensor for monitoring pressure drop across a turbine engine style inlet
air filter or also known as an inlet barrier filter. The DP sensor
monitors filter health by detecting increases in pressure across the
filter element. The pressure difference increases in proportion with the
amount of filtrate captured by the filter. The DP sensor provides a
continuous measure of filter health, with a predetermined pressure
difference used to indicate critical air flow restriction by the filter.
In applications of turbine engines where the sensor indicates the air
flow has been critically restricted by a clogged filter, an inlet bypass
can be opened to maintain flow to the engine until filter maintenance
can be performed. The DP sensor incorporates a piezo-resistive sense
element and is available in pressure ranges of 0-1, ±1, ±5, and ±10 PSID,
with other option available. Other significant features include and
operating temperature range of -40 to +125ºC with a storage temperature
of -55 to +150ºC, an accuracy of ±1.5% of full scale over the operating
temperature, and an operating voltage of 5 to 15 Vdc. The lightweight
device (<6.5 ounces) is rugged by design and has a housing constructed
of an anodized aluminum with an MTBF of 300,000 hours at normal
operating temperature. The DP sensor typically provides an output of ... |
|
|
|
|
|
Kavlico Pressure Sensors Suited for
Pressure Measurements for Hydraulic Applications |
| |
|
Moorpark,
CA – Kavlico, a global business unit of Custom Sensors &
Technologies (CST) has a suite of sensors that have been designed to
perform in a wide variety of hydraulic applications. Capable of
operating for millions of pressure cycles, these low power consumption
pressure sensors provide an accurate, reliable, and stable signal over
many years of operation in the harshest environments. The high
overpressure capability of our sensors for fluid power applications are
designed to withstand the pressure fluctuations associated with these
applications. These rugged devices have stainless steel housings and can
be configured with a broad selection of process and electrical
connectors to fit the specification criteria for each application.
Operating on 5 Vdc, the sensors provide a 0.5 to 4.5 linear amplified
output proportional to pressure. Pressure ranges are available up to
6,000 PSI. Typical pressure sensor applications include ... |
|
|
|
|
|
Compact pressure gauge with dry measuring
cell for sensitive processes |
| |
|
The
new diaphragm pressure gauge from WIKA has been designed for
pressure measurement in sensitive processes such as those in sanitary
applications. Unlike diaphragm seals, it uses a dry measuring cell. That
means, if the diaphragm should leak, no transmission fluid escapes into
the process. Thus the new Model PG43SA pressure gauge increases process
safety. In addition to this, its flush diaphragm construction exhibits
very good rinsing behaviour, with no deposits left on the 316L stainless
steel process connection. The entire measuring instrument can be steam-sterilised
(autoclaved) at 134°C. The compact design of the new pressure gauge,
available in nominal sizes of 40 and 63, enables space-saving
installation due to its Tri-Clamp process connection. The instrument is
suitable for gaseous, liquid and viscous ... |
|
|
|
|
Find
all manufacturers and suppliers of
pressure sensors
pressure transmitters, pressure transducers,
pressure measurement devices |
|
|
Process Chemical Seals for High
Temperatures |
| |
|
The
process chemical seals D900 series offered by Baumer (product
segment Process Instrumentation) are suitable for high temperature
applications up to 400°C. They have been developed especially for the
chemical and petrochemical industry in order to protect pressure
transmitters against aggressive media. The devices are available with
various types of ISO- and ANSI-compliant flanges. Chemical seals are
used for pressure, level or flow measuring in order to protect the
measuring devices against high temperatures and aggressive or dangerous
media. They separate the medium from the measuring device and transfer
the process pressure via a diaphragm and a filling liquid to the
measuring device. The D900 series of process chemical seals are suitable
for measuring the absolute, gauge or differential pressure on viscous or
corrosive media at process temperatures ranges between -40°C and +400°C.The
devices are designed for a pressure range from 10 mbar (gauge and
differential pressure) respectively 50 mbar (absolute pressure) to a
maximum of 100 bar. ... |
|
|
|
|
|
WIKA diaphragm in-line seal with
integrated temperature measurement |
| |
|
WIKA
has enabled the clean, hygienic, dead-space free measurement of pressure
and temperature, with long-term stability, with the model 983.xx
diaphragm in-line seal. With its 3A approval it is equally suited to
applications in the food and beverage industry as it is for biochemical,
pharmaceutical or active ingredient manufacturing. Through the
combination of diaphragm in-line seal and resistance thermometer,
pressure and temperature can be measured at one common point in the
pipeline without any restriction in its diameter. WIKA diaphragm in-line
seals are directly integrated into the pipeline and, as a result of
their circular cylindrical design, they are self-draining in all
mounting positions. In conjunction with the pressure gauge they ensure
both dead-space free as well as crevice-free pressure measurement. The
temperature sensor is fixed to the inner wall of the diaphragm in-line
seal, whereby fast, residue-free cleaning of the measuring point is
guaranteed. By combining measurement parameters ... |
|
|
|
|
|
A-10 goes outdoor, the compact
A-10 pressure transmitter from WIKA |
| |
|
The
compact A-10 pressure transmitter from WIKA is now ready for use
outside. It lives up to its promises: in winter at temperatures down to
-30 °C and also in summer with the greatest of heats. The A-10 has long
been recognised for its excellent quality and its economical pricing. It
has been designed for general industrial applications and versatility.
With the option now available for operation over an extended temperature
range of -30 ... +100 °C, the application range for the A-10 has once
again been considerably ... |
|
|
|
|
|
JUMO dTRANS p20, process pressure
transmitter - easy operation, stainless steel housing |
| |
|
The
new JUMO dTRANS p20 transmitter series expands JUMO’s
top-of-the-range pressure measuring instruments. The best pressure
sensors have been combined with ease of operation in a new stainless
steel housing. The new stainless steel housing makes the transmitters
ideal for all areas of application where they need to be easy to clean,
as well as having optimum corrosion resistance. The food and
pharmaceutical industries are two of the important sectors here. But
there are also many harsh industrial environments, in chemical and
offshore applications, where a lightweight, corrosion-resistant
stainless steel housing has advantages over a conventional, painted
aluminum housing. The new variant, with a short housing, has a key
feature. Electrical connection is via an M12 connector, instead of the
conventional cable gland. This has created a particularly compact device
which can also be used, for example, when circumstances ... |
|
|
|
|
|
Hygienic: Pressure transmitter now with
electropolished stainless steel case |
| |
|
WIKA:
The IPT-1X series of process pressure transmitters is now available with
a new, electropolished stainless steel case. The hygienic design, with
its case sealed to IP66/IP67, fulfils the high demands of sanitary
applications. The flush-diaphragm transmitter (Model IPT-11) is
available with all established hygienic connections. Model IPT-10
instruments with their screw connection, however, can be mounted to one
of the numerous WIKA diaphragm seals for sanitary applications. With
their various output signals and certifications, the IPT-1X pressure
transmitters are suitable for use in the most diverse of plant
applications. ... |
|
|
|
| |
|
>> More (older) articles
about pressure sensors |
| |
|
All technical articles & products to this topic:
|
|
|
Find
all manufacturers and suppliers of
pressure sensors
pressure transmitters,
pressure transducers,
pressure measuring devices |
|
| |
|
Find all Sensors &
Measurement devices
- Access to the Sensor Data base -
Sensors & Measuring
Systems Start page
|
|
|
|
|
| |
|
Copyright ©
Sens2B
International
Sens2B - Sensor to Business
Sens2B - Sensor to
Business is the international measurement technology and sensor suppliers directory / sensors portal.
Sens2B - Sensor to Business does not manufacture or sell any sensors or
measuring devices.
You will find in Sens2B - Sensor to Business database international sensor
companies, international manufacturers, suppliers and distributors of
all kind of sensors, transducers, transmitters, measurement instruments,
devices, probes, meters and detectors.
Powered by
Sens2B - WebDesign
***
Sensors: English /
Sensoren: Deutsch /
Capteurs: Français /
Sensores: Español /
Sensori: Italiano
Top-News: English
(sensors) /
Top-News: Deutsch (Sensoren) /
Top-News: Français (capteurs)
About us /
Contact us /
Conditions of use /
Registration /
Sensors by application /
Newsletter /
Sensor Categories Overview
Partners &
Links /
Sens2B- Reports (Sensor
Suppliers & Sensor Reports) |
|
|
