|
|
|
|
| |
|
| |
Level sensors, level switches
level detection
|
|
|
|
| |
New ! Follow us now also
on Facebook: |
 |
|
|
|
|
|
|
|
|
|
|
A
selection of recently
published
technical
articles, white papers, products
&
application examples: |
|
|
|
|
|
New cost-effective TDR level meter |
| |
 KROHNE
introduces the new OPTIFLEX 1100 C level meter for
liquids and solids in non-explosive environments. The
OPTIFLEX 1100 C offers a cost-effective and higher
performing replacement for traditional level meters such
as RF capacitance, conductive and pressure level meters.
The OPTIFLEX 1100 C is 2-wire, loop-powered and
available with a standard 20 m cable or segmented
coaxial probe for liquids and a 10 m cable probe for
solids. All probes can be shortened on site and
commissioning is completed via an intuitive 5-step
”Quick Setup” procedure. The OPTIFLEX 1100 C is
available with an integrated display and keypad in the
cover so that it is not necessary to open the housing
cover for configuration. A blind version is also
available. Multiple blind versions can be configured on
site, using a single HMI (Human-Machine Interface)
service tool. The OPTIFLEX 1100 C uses TDR (Time Domain
Reflectometry) technology. This state-of-the-art
technology measures level independent from physical
property variations such as dielectric constants,
pressure or density. Unlike traditional meters ... |
|
|
|
|
|
|
+ Info |
|
|
|
|
Gems introduces New Side-Mount Level Switches Made From High
Temperature Versaplast™ Engineered Plasticand Controls Announces the
Completion of Building Expansion |
| |
 Gems©
Sensors & Controls™ (Gems), a global leader in liquid
level, pressure, and flow sensors, miniature solenoid valves,
and fluidic systems, introduces several new versions to their
LS-7 Series of robust point level switches. These compact, side
mount level switches are made from Gems Versaplast™ engineered
plastic for high temperature applications up to 300°F (148.9°C).
The Gems Versaplast™ engineered plastic used on these new level
switches is an extremely versatile material compatible with a
wide range of challenging fluids such as oils and solvents.
Versaplast™ enables the new LS-7 Series sensors to provide an
affordable solution for handling high temperature applications
and corrosive fluids. The durable Versaplast™ LS-7 level
switches are CE, UL and CUL approved, are ideal for use within
methylene chloride and anti-freeze tanks, and are well suited
for low coolant, low hydraulic monitoring within off-highway
vehicle and transportation applications. These new Versaplast™
LS-7 Series versions expand the broad range of small, side
mounted level switches from Gems Sensors available for a wide
variety of fluids or ... |
|
|
|
|
|
|
+ Info |
|
|
|
| New ATEX-approved LBFS level switch from
Baumer |
| |
 Baumer’s
multi-purpose LBFS
level switch is now available in three different
ATEX configurations which enable safe level detection in
explosive gaseous and dusty atmospheres, typically found
in the chemical, pharmaceutical, or food industries.
Baumer uses a highly specialised protective design for
the ATEX versions of the LBFS. Thanks to this, versions
Ex ta for dust (zones 20, 21, and 22) and Ex nA for gas
(zone 2) can be used without a Zener barrier because the
housing itself already provides all the necessary
protection. This is very cost-effective because usually
all sensors for hazardous areas require a Zener barrier.
The ATEX certifications cover zones 0, 1, and 2 (gas) as
well as zones 20, 21, and 22 (dust). Quick installation
and ease of use is also ensured for version Ex ia for
gas (zones 0 and 1). For this version, Baumer provides
the ready-for-use isolation module PROFSI3 LS which is
specially designed for use with Baumer’s level switches
LBFS and LFFS. This dedicated isolation module saves
users the time and effort of selecting and configuring
an additional Zener barrier to operate the sensor. ... |
|
|
|
|
|
|
+ Info |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A
selection of recently
published
technical
articles & products:
|
|
|
| Capacitive Proximity Sensor Resists Abrasion |
| |
 RECHNER:
Abrasive wear caused by contact with products such as
sand, grain or plastic shreds, damages the active
surface of many standard capacitive proximity sensors,
and finally destroys the sensor. Rechner Sensors offer
sensors where the active surface is ceramic making them
ideal for applications that involve the level control of
such abrasive bulk material. These sensors are available
in body sizes M30 x 1,5 and M32 x 1,5. ... |
|
|
|
|
|
|
+ Info |
|
|
|
| Ultrasonic sensors in road and tunnel
construction |
| |
 SNT
Sensortechnik AG: During the construction of
major highway and railway projects, particularly in
tunnel construction, huge quantities of excavation
occur. When the mining takes years, it is worth to use
giant conveyor belt systems. Such installations may be
several kilometers long and have a capacity of more than
1000 tons/hour. These belts are of course fully
automated. This creates the risk that the excavation
blocks the hopper at the transfer points from one band
to another. For permanent monitoring of the transfer
stations robust ultrasonic sensors are used. They look
down into the hopper and report if the level exceeds a
certain value. The plant will then be slowed or stopped
accordingly. Suitable ultrasonic sensors from SNT
Sensortechnik AG are those of the UPK Series. SNT
Sensortechnik AG is a specialist in ultrasonic sensors
for more than 20 years. ... |
|
|
|
|
|
|
+ Info |
|
|
|
|
Gems Sensors and Controls introduces a new rugged metal electro-optic
sensor |
| |
 Gems®
Sensors & Controls™ (Gems), a global leader in liquid
level, pressure, and flow sensors, miniature solenoid valves,
and fluidic systems, introduces the new low cost, miniature
ELS-950M Series of Electro Optic Level Sensors (ELS) for a wide
range of applications and industries. The ELS-950M Series
expands on the existing ELS-950 product line with a brass
housing to perform in harsh environments, maintain integrity in
temperatures ranging from -40°F to +230°F and pressures to 250
psi. ELS-950M liquid level sensors feature an over-molded
electronics insert, TPE insulated wires, and a flurocarbon
O-ring seal to create a watertight, environmentally resistant
assembly. The ELS-950M is UL and CE approved to EMI standards
and shock and vibration tested to MIL standards, IP66/67 and
RoHS compliant. These robust sensors are available in 5 or 12
Vdc models with mounting options of ¼” NPT, ½”–20UNF-2B or
M12x1-8. “With the development of the ELS-950M Series, Gems has
continued to expand the broad offering of our ELS product line,”
says Kevin Castonguay, Product Marketing Manager for Gems
Sensors & Controls. “The product delivers a robust and reliable
solution for OEM customers. The small, solid state-sensor is
durable enough to handle almost any application or temperature.” ... |
|
|
|
|
|
|
+ Info |
|
|
|
|
Gems Sensors and Controls introduces a new line of high precision
potentiometric continuous level sensors |
| |
 Gems®
Sensors & Controls™ (Gems), a global leader in liquid
level sensors, pressure sensors and flow sensors, miniature
solenoid valves, and fluidic systems announced the launch of the
new CT-1000 potentiometric level sensors for OEM and end user
applications. The CT-1000 level sensors provide highly accurate
continuous level gauging for the filling of tanks or continuous
separating layer coverage in nearly all electrically conductive
liquids with resolution of ±1mm independent of pressure,
temperature and density. One of the biggest assets of the sensor
is the extremely short measuring times in the millisecond range.
The level sensor is suitable for a wide-range of tanks with
lengths from 8″ to 19.7′ (6 meters) and is available with 4-20mA
output or with Hart protocol. Built from robust stainless steel
material, the CT-1000 Series offers versions that can handle
temperature ranges up to 390°F (200°C) and pressure ranges up to
2,175 PSI (150 bar). CT-1000 fluid level sensors operate
according to the potentiometric measuring principle ... |
|
|
|
|
|
|
+ Info |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
More technical articles & products to this topic:
|
Find
all manufacturers and suppliers of
level sensors, level switches
level detection |
|
| |
|
|
Custom Conductive Fluid Level Sensors from Standex Electronics are Ideal
for Viscous, Harsh and Corrosive Materials |
| |
| Custom
conductive fluid level sensors from Standex Electronics
feature a patented "bias ring" to eliminate false positives
resulting from material buildup on sensor elements, making them
ideal for use with many conductive fluids. This proven
technology is ideal for demanding applications — even those with
high particulate loading. Models range from simple designs which
are driven by external electronics, to complex versions with
internal electronics to eliminate electrolysis. These custom
conductive fluid level sensors are ideal for applications
including harsh, viscous and corrosive materials like dishwasher
soap, bleach, and other detergents, viscous materials like syrup
dispensing in foodservice environments, water-in-fuel sensing
for automotive or off-road vehicles, HVAC/R condensate
reservoirs, industrial control applications, and more. Standex
custom conductive fluid level sensors allow bulk detergent
storage and dispensing, for example, saving space, eliminating
waste, and reducing pollution while providing OEMs with unique
advantages in a highly competitive ... |
|
|
|
|
|
Ultrasonic sensors for wood chip level control |
| |
| WayCon
Positionsmesstechnik: Wood chip or wood
pellet heating systems are modern CO2-neutral
biomass heating systems for both private and
large industrial plants. As the volume
consumption is relatively large compared to
liquid fuels, the knowledge of the current level
is particularly important. For large industrial
heaters the feed quantity has to be controlled
and thus measured as well. Conventional simple
level gauges are often overstretched because of
the dirty and dusty environment in a tank or on
a chip-conveyor belt. Whereas ultrasonic sensors
measure reliably even in dusty air and with
polluted membrane. Wood pellets are pressed
sawdust with no additives. They are particularly
suitable for home heating. Wood chips are used
mainly in agriculture and industry, where wood
residues are available almost for free. Best
suited ultrasonic sensors for this application
are the UFA or the UN Series. ... |
|
|
|
|
|
SSI Technologies Inc. Announces Combination Sensor, For Monitoring DEF
Temperature-Level-Concentration |
| |
| SSI
Technologies Inc. today announced the launch of an SCR
System DEF combination sensor to monitor urea level, temperature
and concentration. These sensors are designed to meet pending
worldwide emissions regulations that will require on-and
off-road OEMs to monitor DEF quality and concentration for
mandated emissions control associated with SCR systems. The
combination sensor, utilizing proven ultrasonic technology, is
an in-tank design with OBD capability. It provides these
critical measures and capabilities: - Detection of 10 percent or
greater water dilution of DEF, - Detection of DEF contaminants
such as diesel fuel, water, windshield washer fluid, brakes
fluid, motor oil, gasoline and anti-freeze, - High resolution
(0.5 mm)DEF level monitoring for OEM operator information, -
Immediate operator notification of any diesel miss-fills in DEF
tank, - Accurate temperature monitoring (+/- 3 degrees C) for
DEF heating management, - Redundant indication of empty DEF
tank, - J1939 CAN-Bus technology for ready system integration, -
Programmable for profiling to regular or irregular/odd shaped
DEF tanks. SSI will provide test samples and engineering counsel
to qualified OEMs or system suppliers. SSI Technologies Inc. is
leading designer and manufacturer of ultrasonic level, pressure
and magnetic sensors and monitoring systems. ... |
|
|
|
|
|
Overflow impossible – point level sensor LI |
| |
| ifm
electronic: The new point level sensors of the
LI21 series are a reliable overflow protection for
liquids. Setting in the application via two buttons and
with a clearly visible LED switching status indication
only takes some seconds. The new point level sensors of
ifm electronic approved as overflow protection according
to the German overspill standard WHG section 19 monitor
the overfilling of tanks. Deposits or foam can be
suppressed by adjusting the unit, this provides
additional safety. Due to the capacitive operating
principle, the sensors are wearfree and have no moving
components. Moreover the new point level sensor has a
cULus approval. The plant builders save time and money
since this approval is the prerequisite required for the
access to the North American and Canadian market. This
approval combines the CSA (Canadian Standards
Association) and the UL (Underwriters Laboratories) ... |
|
|
|
|
Find
all manufacturers and suppliers of
level sensors, level switches
level detection |
|
|
Gems Sensors & Controls introduces a new line of high precision
magnetostrictive level sensors |
| |
| Gems®
Sensors & Controls™ (Gems), a global leader in liquid
level, pressure, and flow sensors, miniature solenoid valves,
and fluidic systems announced the launch of the new XT-1000
series of magnetostrictive continuous level sensors for OEM and
end user applications. The XT-1000 series offers a line of
robust, stainless steel sensors with highly accurate continuous
level measurement in lengths from 8 inches to over 13 feet. The
XT-1000 measures liquid media levels using the complete probe
length and is largely unaffected by temperature. The sensor
offers constant sensing of fluid level regardless of the
physical state of the media including: bubbles, foam,
condensation, precipitation, pressure, temperature or changes in
density. The use of magnetostriction is ideal in applications
that require extremely accurate indication such as the chemical ... |
|
|
|
|
|
A family of electronic switches for pressure, temperature and level |
| |
| WIKA
is presenting an innovative product family of electronic
switches for fluid technology in machine building for the first
time at the Hannover Messe. The new industrial instruments
measure and control pressure, temperature and level with an
identical "look and feel". The switches have high functionality
and are also very user-friendly. The three-key operation with
tactile feedback and a clear menu structure ensure that
commissioning is smooth and trouble-free. Set parameters can
also be checked quickly. The parameters and values are displayed
on a 14-segment LED display with nine-millimetre high
characters. In particular, readability of characters has been
improved considerably to be more intuitive to work with. The
display and housing rotates independently, making the parameters
and values easy to read, even under difficult conditions. ... |
|
|
|
|
|
Space-saving and flexible capacitive sensor for reliable liquid level
detection |
| |
| Baumer
launches the new CFDK 25
capacitive sensor for the reliable detection of
liquid levels in confined spaces. The sensor is
characterized by its very flat housing and versatile
mounting options. It detects liquids through container
materials. The very flat housing design with a height of
only 6 mm allows easy installation e.g. between a
container and the wall. To further facilitate the
integration of the capacitive sensor into machines and
facilities, Baumer offers a matching innovative mounting
frame. Using this frame, the sensor can be installed not
only with screws but also with cable ties, Velcro
fastener or glue. For
liquid level measurements at mobile repositories,
e.g. waste containers in lab automation, the same sensor
can be used for several containers where frames are
already attached. The sensor can be removed from and
re-installed into the mounting frame easily and without
tools (Snap in place). Four fixed sensing distances from
2 to 25 mm supersede a potentiometer and turn the CFDK
25 into a plug-and-play solution. In order to guarantee
chemical resistance and thus a long product life also
under demanding conditions, the housing of the
capacitive sensor is made of ... |
|
|
|
|
|
ATEX zone 20 - Capacitive PerLevel Level Probe |
| |
| Rechner
Sensors capacitive
filling level probes are now
available for ATEX zone 20,
where there is a danger of dust
explosion when working with
products such as flour. The
medium contacting part of the
probe has a PTFE body and the
connection head is made of food
grade stainless steel. Typical
applications for these probes
are for level control in the
food or pharmaceutical industry.
The probe length (from 100 mm up
to 2 m) and the position of the
switching points are flexible
and thus optimised for the
client's application. ... |
|
|
|
|
|
Capacitive Level Sensor Of RECHNER’s 26 Series With Remote Adjustment |
| |
| Ask
for ETW (ETW =
EasyTeach by
wire) for more
convenience at
your
application. The
26 series from
RECHNER
was originally
designed to cope
with the
problems of very
adhesive
products. It
turns out that
these capacitive
sensors have
excellent
characteristics
for general use
in level
control.
Typically they
overcome the
problems caused
by products
sticking to the
sensor and the
need for
continual
re-adjustment.
The semiround
sensor tip is a
striking feature
of this series.
The electronics
are based on
RECHNER’s High
Performance
Technology and
guarantees high
quality and
reliability. The
level sensors
are available
with various
process
connections,
such as
Triclamp, G1“
and M22. It is
often a real
challenge for
the user to
achieve good
level control in
large silos or
in some
containers with
difficult
access. A direct
adjustment of a
sensor in the
container is
often not
possible.
Reasons can be
that the access
is dangerous for
human beings or
the container is
too high or
possibly space
is extremely
limited. For
these situations
RECHNER-Sensors
now offer
capacitive
sensors with ... |
|
|
|
|
Find
all manufacturers and suppliers of
level sensors, level switches
level detection |
|
|
Ultrasonic sensors for wood chip level control |
| |
| SNT
Sensortechnik AG: Wood chip or wood
pellet heating systems are modern CO2-neutral
biomass heating systems for both private and
large industrial plants. As the volume
consumption is relatively large compared to
liquid fuels, the knowledge of the current level
is particularly important. For large industrial
heaters the feed quantity has to be controlled
and thus measured as well. Conventional simple
level gauges are often overstretched because of
the dirty and dusty environment in a tank or on
a chip-conveyor belt. Whereas ultrasonic sensors
measure reliably even in dusty air and with
polluted membrane. Wood pellets are pressed
sawdust with no additives. They are particularly
suitable for home heating. Wood chips are used
mainly in agriculture and industry, where wood
residues are available almost for free. Best
suited ultrasonic sensors for this application
are the UPK Series or the UPR Series. SNT
Sensortechnik AG is a specialist in ultrasonic
sensors for more than 20 years. ... |
|
|
|
|
|
Capacitive Level Sensors – EasyTeach – With Clear Text Display |
| |
| The
26 series from
RECHNER was
originally designed to
cope with the problems
of very adhesive
products. It turns out
that these sensors have
excellent
characteristics for
general use in level
control. Typically they
overcome the problems
caused by products
sticking to the
level
sensor and the need for
continual re-adjustment.
The semiround sensor tip
is a striking feature of
this series. The
electronics are based on
RECHNER’s High
Performance Technology
and guarantees high
quality and reliability.
The level sensors are
available with various
process connections,
such as Triclamp, G1“
and M22. Now this series
has been extended with
the new Easy Teach
range. This new range
has housing lengths that
can reach deeper into
the containers. These
level sensors have a
G1½“ process connection.
Thanks to the EasyTeach
function the adjustment
is made with just one
push button. The clear
text display assist with
the adjustment. These
capacitive level sensors
are ... |
|
|
|
|
|
There’s a name for hydrostatic level measurement: DCX Data loggers for
hydrostatic level measurements |
| |
| Keller
AG für Druckmesstechnik offers
probes to monitor groundwater levels and
filling levels in tanks that can be used
under a wide range of conditions.
Depending on requirements, these probes
provide fully autonomous operation or
they can be used with an integrated data
logger, wireless transmission (GSM), an
ambient pressure-compensating capillary
or a separate absolute pressure sensor;
additional options include integrated
temperature measurement, etc. Depending
on the sounding tube, probe diameters of
16 mm and 18 mm up to 22 mm are
available. Thanks to its diameter of
only 16 mm, the DCX-16 can be used in
locations where every millimeter counts
(e.g. for sounding tubes with small
diameters). The pressure sensor is
welded into the logger housing. Type
DCX-16, which is screwed in position and
is fully watertight, operates as an
autonomous battery-powered data
collector with an absolute pressure
sensor. In shallow water, a second
logger (barometer) can be used for
separate recording of the barometric
pressure on the surface. The
differential pressure and/or the filling
level are then calculated in the PC by
subtraction of the time-stamped
measurement data from the individual
loggers. Version DCX-16 SG/VG provides a
cable connection, wherein barometric
pressure is fed to the sensor ... |
|
|
|
|
|
New reverse assembly option for LBFS frequency-sweep level switch |
| |
| The
new standard version of
Baumer’s LBFS level
switch is made from AISI 304 or
316 stainless steel and comes
with a PEEK sensor tip. In
addition to this, Baumer now
provides the LBFS with special
G½ process connections for
reverse assembly. These options
broaden the field of possible
applications of the LBFS. Based
on the novel frequency-sweep
technology, the level switch is
suitable for measuring the
levels of viscous or dry
substances as well as liquids
with a repeatability and
hysteresis of ± 1 mm and a
typical response time of 0.2
seconds. As the LBFS is
unaffected by flow, turbulence,
bubbles, foam, and suspended
solids, it is particularly
suitable for level detection in
processes generating those. The
new G½ connection for the LBFS
allows for two types of reverse
assembly. The first makes it
possible to mount the level
switch from the inside of a tank
using the included fibre gasket
and a G½ nut. Fields of
application include low level
and leakage detection in tanks
for oil or cooling fluid used in
pneumatic systems ... |
|
|
|
|
|
Level Control Measurement in Water and Wastewater treatment |
| |
| Pepperl+Fuchs
provide a various range of level control sensors
for the limit detection and the continuous
measurement for applications in water and
wastewater industry. Float switches LFL: Float
switches are used for simple limit value
recording in liquids. The greater density of the
liquid means that the switch floats on the
surface of the medium. The float switch is fixed
with its cable securing element at a level
adapted to suit the process. Tilting motion
during rising and falling of the float triggers
the switching procedure. Proximity sensors and
micro switches are used as switching elements.
The LFL float switch series is used as limit
value switches in the form of a sphere or
sleeve. LFL thus represents an inexpensive
solution for detecting limit levels and
signaling leaks to the connected monitoring
system. Vibration limit switch LVL: The
piezoelectric-agitated oscillation of a
vibrating fork is dampened if it comes into
contact with the filling medium. Electronics
generate the switching signal on the basis of
these changes. ... |
|
|
|
|
Find
all manufacturers and suppliers of
level sensors, level switches
level detection |
|
|
Capacitive Level Sensors with Triclamp Process Connection For ATEX Zone
20 |
| |
| Great News for the food and pharmaceutical industry.
RECHNER-Sensors now offer level sensors with a Triclamp
process connection for ATEX Zone 20. These capacitive sensors
are designed for the level control of bulk materials. It goes
without saying that the sensors have PTFE and stainless steel
bodies which are allowed to be in direct contact with food and
pharmaceutical products. In addition the sensors are suitable
for CIP up to 120°C and therefore suitable for in-line cleaning
and sterilisation. ... |
|
|
|
|
|
Groundbreaking new level sensor launched by ifm electronic |
| |
| ifm
electronic gmbh: In the food industry foam and
deposits often make a reliable level detection
difficult. With the LMT hygienic
point level sensor from ifm electronic they can be
suppressed. This means that the LMT sensor can reliably
provide full or empty signals of tanks and ensure
run-dry protection of pumps. With no moving parts and a
smooth surface (the surface characteristics of the PEEK
tip of the sensor is Ra < 0.8 µ) it is virtually
impossible for residues to stick to it or clog the
sensor. Even with viscous and sticky media such as
ketchup the LMT point level sensor operates reliably.
Factory setting to one of two road categories of fluid
types eliminates the need for local adjustment. The
right version is selected from an extensive list of
fluids. Using high quality materials such as 316L
stainless steel and PEEK the sensor meets all
requirements of hygienic ... |
|
|
|
|
|
Guided-wave level probe from ifm electonic detects more fluids and
ignores foam |
| |
| Characterised
by flexible and easy installation the updated
efector gwr microwave sensor from sensor market
leader ifm electronic. The new
units are distinguished by better performance
and extended application possibilities.
Advantages of the microwave radar system lie in
its ability to ignore residues of sticky
material that might build up on the probe and
give a false level. This feature also ignores
foam and sees the true level. The solid-state
principle avoids mechanical issues with floats
that stick. The three new versions of the
tried-and-tested level sensor can now be used in
aqueous media, coolants and cleaning solutions
or oils. This makes them suitable for continuous
level monitoring of almost all liquids. ifm
electronic offers the efector gwr with two
(order no. LR700s) or four (order no. LR8000)
switching outputs or with switching and analogue
output (order no. LR3000). The modular sensor
system consists of the sensing head, the probe
and optionally the coaxial tube. Microwave
pulses are transmitted by the sensor head and
guided along the probe. If the microwave pulse
hits the medium, it is reflected and evaluated
by the sensor. The sensor is installed in the
tank using a process ... |
|
|
|
|
|
Capacitive Sensor for level monitoring of conductive products |
| |
| RECHNER
SENSORS: Level control of extremely
conductive media is a recognised problem for a
good many users. Products that may appear to be
non-adhesive can often leave an almost invisible
but highly conductive film on the level
sensor body, making level
monitoring extremely difficult. The result can
be a full signal even when the container is
empty. RECHNER-SENSORS has the solution. The
„Triple-G Series“ are especially designed for
such applications. These level
sensors have PTFE bodies and are
available ... |
|
|
|
|
|
Trafag Submersible Transmitter ECL, Reliable hydrostatic Submersible
Transmitter with excellent price-benefit ratio |
| |
| Trafag
AG: Due to its excellent price performance
ratio and outstanding chemical resistance the new Trafag
submersible transmitter ECL 8438 is suitable for a wide
range of applications where reliable
measurement of a fluid level is required over a
considerable period of time. Measuring ranges from 0 to
0.1 through to 0 to 25 bar are available. The amplifier
electronics which incorporate Trafag’s in-house
developed ASIC offer the best available technology and
allows for the compensation of temperature-driven drift
effects. The NLH accuracy of the Trafag ECL submersible
transmitter
is +/-0.2%. Alternatively the Trafag NAL submersible
transmitter is available with +/-0.1% NLH accuracy. The
sensor’s slim body is made of stainless steel and can
easily be inserted into a 1 inch wide guiding tube. The
ceramic sensor cell is safeguarded by a protective cover
at the end of the unit. PUR, PE or PTFE cable can be
selected dependent upon the media. Vented cable enables
the sensor to reference against atmospheric pressure
(gauge or relative pressure reference). ... |
|
|
|
|
Find
all manufacturers and suppliers of
level sensors, level switches
level detection |
|
|
Customized ultrasonic level sensors with 3 binary outputs |
| |
| For
certain
level control tasks sensors with more than one
binary output are often favorable. SNT
Sensortechnik AG offered so far ultrasonic UPK
sensors with one or two PNP outputs. The same sensors
with distance ranges from 500 to 5000mm are available on
demand as customized versions now with 3 outputs as
well. Each can be individually adjusted with a
potentiometer. Due to the bigger M12 connector and more
potentiometers this version is built in a bigger
housing. SNT Sensortechnik AG is a specialist in
ultrasonic sensors for more than 20 years. ... |
|
|
|
|
|
For all those needing chemical-resistant and pressure-resistant sensors! |
| |
| microsonic:
The new hps+ ultrasonic sensors from microsonic
are fitted out - as standard - with a Teflon
film. It is sealed with a FFKM O-ring against
the housing made of 1.4571 stainless steel or
PVDF. This ensures a high degree of resistance
to aggressive media, which was proved through
being stored over cellulose thinner and
1,000,000 alternating pressure stresses. The
hps+ sensors can be used for filling level
measurement in tanks up to a 6 bar positive
pressure, as well as under normal pressure.
Pressure-tight installation in a tank is
undertaken by means of a 1“or a 2“ threaded
flange. The hps+ ultrasonic sensors are now
available with 4 ranges from 30 mm to 8 m ... |
|
|
|
|
|
Liquid Level Transmitter supports FOUNDATION Fieldbus |
| |
| MTS
Sensor Technologie
has developed a new
output for its line of magnetostrictive Level
Plus® liquid level sensors. FOUNDATION Fieldbus
will be the third protocol offered by the MG
digital level transmitter, which also includes
current production of Modbus and the ASCII based
proprietary DDA protocols. The Model MG
satisfies the demand for a digital communication
interface in the liquid-level marketplace for
vessels from 508 mm to 22,000 mm. It offers
maintenance free liquid level measurement for
automatic tank gauging without any
recalibration. Featuring 3-in-1 measurement of
the product level, interface level, and the
average temperature of the liquid from up to 12
temperature points it utilizes a single process
opening, eliminating the need for separate level
and temperature transmitters. Designed for
inventory control, the model MG offers a
resolution of 0,025 mm at maximum length and can
also provide volume measurement from a 100-point
strap table that the user loads into the
transmitter. The new FOUNDATION Fieldbus
protocol will make the Model MG transmitters
... |
|
|
|
|
|
UPK ultrasonic sensors used in vegetable cleaning process |
| |
| SNT
Sensortechnik AG: Fresh vegetables from the
field must be cleaned quickly in large quantities,
packaged and transported to the supermarket. At first a
lot of dirt sticks on the carrots. They are cleaned in
water baths and then brushed clean with mechanical
rotational brushes. They are then weighed accurately and
packed in plastic bags. Compact ultrasonic sensors of
the UPK series from SNT Sensortechnik AG are used here
for two purposes. First, the level of the water bath is
controlled by a sensor. Before the brushing machine two
UPK sensors are mounted with synchronization. They
measure the level of the feed hopper and control the
conveyor belt in a way that the brushing machine is
always properly loaded. The environment is very rough. A
lot of water, soil and carrot skin is splashing around.
The UPK sensors are IP67 waterproof and mechanically
very robust. They work even with heavily polluted
diaphragm. SNT Sensortechnik AG is a specialist in
ultrasonic sensors for more than 20 years. ... |
|
|
|
|
|
Submersible Sensors PSMN / PSSN for Hydrostatic Depth Measurement |
| |
| With
the pressure transmitters PSMN and PSSN, Baumer
offers compact submersible sensors for hydrostatic depth
measurement. They are suitable in many level measurement
applications in drinking water supply, wastewater, reservoirs,
lakes and rivers, flood protection or pump controls. Due to the
small diameter of only 22 mm, the devices are perfect for the
use in 1-inch sounding pipes. The PSMN is available with an
accuracy of up to 0.1 % F.S. The PSSN’s accuracy is 1 % F.S. The
submersible sensor PSMN is based on a piezoresistive silicon
measuring cell. It is suitable for level measurement in drinking
water supply, hydroelectric power plants or in shipbuilding,
amongst others. The pressure transmitter has a measuring range
from 1 to 250 mH2O and is offered with an accuracy of 0.1 % and
0.25 %. It features high long-term stability of 0.1 % F.S. per
year and can be used with medium temperatures up to 80 °C. For
applications in the ship building industry, the PSMN is
available in a seawater-resistant version. ... |
|
|
|
|
Find
all manufacturers and suppliers of
level sensors, level switches
level detection |
|
|
Hygienic Level Switch LFFS for High Temperatures |
| |
|
Baumer’s level switch LFFS is suitable for high process
temperatures of up to 200 °C. A bright blue light on top of the
switch shows when a media is detected. The indication can be
seen easily even if the sensor is mounted on top of a tank.
Thanks to the DN38 process connection, the sensor is excellently
suitable for food and beverage industry applications. For the
use in hazardous areas, different ATEX versions are available.
It can be easily configured on PC via the FlexProgrammer 9701.
The LFFS detects the level of liquids, viscous fluids and even
dry media. For particularly difficult media like adhesive
substances, the teach-in function enables a manual adjustment of
the level to be detected. The switching status can be chosen as
“normally opened” or “normally closed”. The output type can be
chosen as PNP, NPN or digital out by the programming unit. ... |
|
|
|
|
|
RLI Shaker – Rotary Level
Indicator |
| |
|
4B
BRAIME Components LTD: The RLI “Shaker” rotary paddle switch
is used to detect high / low levels of bulk granular solids in
bins, tanks and silos. It can also be used to detect plug
conditions in spouts, where long life and failsafe detection is
required. Utilizing a unique stepper motor drive, the RLI
“Shaker” rotates clockwise, then counter-clockwise and then
shakes to shed any excess material build up. If the paddle
rotation is impeded at any time by the bulk material then the
electronic circuit provides a signal for level indication or
control. The RLI “Shaker” uses fewer mechanical parts compared
with standard rotary level indicators. No gearbox or clutch is
required as the stepper motor drive is directly coupled to the
output shaft and is practically indestructible and cannot be
damaged by forced or backwards rotation. Also, an adjustable
torque control allows ... |
|
|
|
|
|
Multitude of Refinements Improves GEMS LS-3 Series Level Switch’s
Durability and Keep Costs Low |
| |
|
CT—LS-3
Series compact all plastic liquid level switches, from Gems Sensors &
Controls, are ideal for shallow tanks, restricted spaces or for any
low-cost, high volume use. The highly reliable design of the
LS-3 Series level switch operates on a simple principle: a
magnet-equipped float moving directly with the liquid surface
actuates a hermetically sealed reed switch within the unit’s
stem. As with all Gems buoyancy type level switches, contact
between the fluid and the switch is hermetically sealed,
ensuring long life and reliable operation. LS-3 Series level
switches are available in a wide variety of engineered plastics,
including polysulfone, polypropylene, and FDA-approved PVDF.
They offer broad water-based, chemical, oil, and food grade
compatibility at an attractive price for OEMs. Models are
available to withstand temperatures ranging from -40°F to +250°F
(-40°C to +121°C), and pressures to 150 psi (10.3 bar). These
compact units measure as little as 0.75-inch in diameter and are
less than 2” in length below the mounting. A unique fluted stem
prevents build-up from dissolved solids in the monitored liquid.
LS-3 Series switches are easy to install ... |
|
|
|
|
|
Sierra Announces 2-Year Warranty Coverage for Flow Level Switches |
| |
|
Sierra
Instruments announces it will offer a 2-year warranty for its entire
line of Innova-Switch™ Flow Level Switches beginning July 1, 2010.
“We’re committed to the highest quality in all our products, and I think
this action proves that we’re thinking ahead for our customers’
long-term benefit,” says Scott Rouse, Sierra Product Manager. “ Sierra’s
Innova-Switch™ has been a solid performer in the market for decades.
Designed to meet a broad range of performance and environmental
application requirements, the sensor and other wetted materials are 316L
stainless steel and feature all welded construction with no moving
parts. The Innova-Switch is also easy to install and adjust, giving
reliable, low maintenance performance in the most demanding
applications. Flow and level detection is accomplished by using a
high-resolution thermal differential technique. The sensor consists of a
pair of matched Resistance Temperature Detectors (RTD's). ... |
|
|
|
|
|
MTM/N10: Pressure / data logger with very thin diameter |
| |
|
SCAIME: Offering a very thin probe of Ø10mm,
this new pressure transducer, or level liquid data logger can be
inserted inside narrowest wells. Available in operating pressure
range from 10m H2O to 100m H2O, its combined error is less than
0,1%. The MTM/N10 offers also an incomparable personalization
capabilities such as: * Cable length fixed in order to be
appropriate application’s requirements. It is also possible to
equip the probe with an electronic board (into a box). Two kinds
of electronics are available: * Probe equipped with integrated
electronic measurement conditioner delivering 0-10V or 4-20mA
analog output. * Integrated and autonomous data logger enabling
to record up to 500.000 measurements with integral setup (start
& stop date-time, recorded values interval). MTM/N10 pressure
transducer is dedicated to level measurement applications in
wells, boring, dams and it is especially adapted for all use in
the field of geology and hydrology. ... |
|
|
|
|
Find
all manufacturers and suppliers of
level sensors, level switches
level detection |
|
|
Capacitive fill level sensor for soiled
media |
| |
|
Baumer’s
new CFAK 12 capacitive fill level sensor detects conductive liquids
while suppressing dirt particles and detergent residues. When detecting
fill levels in soiled media, conventional capacitive sensors are
susceptible to suspended solids that influence their switching behavior
in a negative manner. The new CFAK 12 is the smart remedy for these
applications. Incorporated into a grounded metal basin it monitors the
fill levels of water and water-based fluids. Thanks to its special
housing design and the plane plastic surface, dirt particles hardly
adhere to the sensor. Therefore, the cleaning effort is drastically
reduced compared to conventional solutions. Even if dirt should adhere
to the sensor the integrated compensating electrode makes sure that it
is suppressed and the fill level is still detected precisely.
Additionally, the capacitive sensor is extremely resistant to detergents
and suppresses their residues reliably. Amongst others, the capacitive
fill level sensor is applied in railway lavatories ... |
|
|
|
|
|
JUMO MAERA, level measurement probe series |
| |
|
JUMO:
The measurement variable of liquid level, particularly the hydrostatic
measurement of liquid level, has got a new look: Both level measurement
probes, the MAERA S25 and S28, are additions to the current JUMO product
range. The current brochure and Internet presentation provides a quick
overview of both the new and the established. Level measurement probes
are used for hydrostatic liquid level measurement in tanks, or for
determining the level in open waters. There are so many products and
variants available on the market that it is often difficult to make the
right choice for a given application. The vast number of different
variants at JUMO are simply and clearly set out in the new “Level
measurement probes – hydrostatic level and liquid level measurement”
brochure at http://br-levelprobes.jumo.info and in the product
comparison at http://pc-levelprobes.jumo.info. Starting from the
application, all the level measurement probes can be delivered complete
with different cables, materials and process connections in the various
price segments, as well as with approval, integrated overvoltage
protection or temperature sensor options ... |
|
|
|
|
|
Smart Alternative to Vibrating Fork Level
Switches |
| |
|
With
the level switch LBFS, Baumer offers a cost-efficient and
reliable alternative to widely-used vibration level switches. The device
is able to detect the level of viscous or dry substances as well as
liquids and can be mounted in any position in tanks or pipelines. The
sensor is unaffected by flow, turbulence, bubbles, foam, and suspended
solids. As the sensor head is smooth and very small, even adhesive media
do not stick to it. The sensor’s short response time enables fast
filling processes as well as an accurate and reliable keeping of levels.
The level switch detects high and low levels in tanks and pipelines.
Furthermore, it can be used for overfill protection, dry running
protection of pumps and phase separation in oil-water mixtures. There
are many fields of applications: drinking water, wastewater, filtration,
HVAC, hydraulics, oil and gas, bio energy, wood pellets, flour mills,
railway transportation or pump systems. The sensor is mounted in a
compact, very robust, and corrosion-resistant stainless steel housing. ... |
|
|
|
|
|
Reliably detecting water – with MICROmote®
optical sensors from STM |
| |
|
STM
Sensor Technologie München GmbH: Clear liquids such as water cannot
be detected by optical means in transparent pipes or containers without
further ado. It gets especially difficult if the pipe diameter is very
small or if the containers are only semi-transparent. When using optical
sensors for detection of water levels, the effects of light transmission
and refraction in water can interfere with one another to such an extent
that measurements are actually reversed, especially in the interaction
with the container walls. To solve this problem, the through beam
sensors of the MICROmote® “JJ” series were developed by STM. The
transmitters work in the upper infrared range. In the absorption
spectrum of water there is at this point a maximum and the light of this
wavelength is absorbed by the individual molecules. Water thus becomes
“non-transparent” for the optical system and detection is drastically
simplified. Depending on the size of the sensor or the effective
diameter of the beam, level detection can be attained with particular
precision. ... |
|
|
|
|
|
Level Detection Based on Frequency Sweep
Technology |
| |
|
With
the FlexLevel Switch 4101 Baumer presents a new sensor which is
based on frequency sweep technology. The device detects the level of
liquids, viscous fluids and dry media. Due to the smooth, very small
sensor head even adhesive media don’t stick whereby the adhesion error
is very low. The level switch is suitable for overfill protection, low
level detection, dry running protection and phase separation. It can be
installed in any position and even at points difficult to access. The
FlexLevel Switch 4101 can be easily configured on PC via the
FlexProgrammer 9701. A frequency is swept by the transmitter and becomes
subject to a phase shift depending on the media. When in contact with
the media having a different dielectric constant (DC) outside the
selected DC range, an electronic switch is triggered. The high
sensitivity over a large sensing range from DC 1.5 up to more than 100
allows the level detection of all kinds of powders, granulates and
liquids. Even difficult substances like polyamide granulate or paper can
be detected reliably. Thanks to the teach-in function, the switching
point is adjustable even for sticky media. ... |
|
|
|
|
Find
all manufacturers and suppliers of
level sensors, level switches
level detection |
|
|
Mould Level Measurement - castXpert LB
452 |
| |
|
BERTHOLD
Technologies GmbH & Co. KG: castXpert is the state-of-the-art
measuring system for precise and reliable monitoring of mould level. Due
to the many years of experience in mould level applications, as well as
the close collaboration with customers from the international steel
industry, castXpert perfectly serves the specific requirements of this
measuring task. It works with both types of measuring technology: *
GAMMAcast – radiometric based mould level measurement, * ECcast – eddy
current based mould level measurement ... |
|
|
|
|
|
Continuous Measurement of Coke Drum Level |
| |
|
BERTHOLD
Technologies GmbH & Co. KG: Monitoring the level of coke drum
bottoms in a delayed coker is among the most important processes in a
refinery. High temperatures and foam, extensive caking as well as a
high-pressure water jet demonstrate the unfavorable measuring conditions
dominating this application. The radiometric level measurement employing
the LB 490 Tower-Sens detector has proven to be a reliable and
cost-effective solution that will withstand this tough environment. It
provides a continuous measurement, monitoring the foam as well as the
coke level in the drum online and very accurately. All components of the
measuring system are mounted on the outer wall of the coke drum and are
therefore not affected by the aggressive processes inside. The Tower-Sens
utilizes a detector length up to 8m and can even be mounted in a
cascaded fashion to deal with the long measuring ranges ... |
|
|
|
|
|
Sensors for Water Treatment Applications |
| |
|
Water
treatment applications place high demands on pressure and level
measuring instruments. For these applications, Baumer offers
robust sensors which are suitable for high vibrations as well as for the
use with aggressive media. For example, sensors made of
seawater-resistant Hastelloy C and with a ceramic sensing element are
available for desalination plants. Flush mount versions are offered for
sewage applications. The devices can be easily configured on PC via the
FlexProgrammer 9701. Pressure and level measuring devices for water
treatment applications have to be extremely robust. First of all, this
concerns the materials used in instruments that are in contact with
aggressive or corrosive media in applications such as desalination
plants or sewage sludge processing. In addition, the devices have to be
highly resistant against vibrations which are generated continuously for
example in applications with volumetric pumps. Further challenges are
the formation of foam, suspended solids, and condensation in tanks. For
these challenges, Baumer offers an extensive portfolio of pressure and
level sensors ... |
|
|
|
|
|
Liquid Level Sensors reach new levels
with the release of their new LS05 Series! |
| |
|
MEDER
electronic announced the release of their new LS05 Liquid Level
Sensors, made of tough stainless steel tubing, these sensors can be
customized up to 6.5 feet in length, detect multiple liquid levels and
withstand exposure to many chemical solutions, high pressure and high
temperatures. The LS05 Series Liquid Level Sensors is the most diverse
level sensor yet, combining hundreds of standard options ranging from
switching power and connectivity to fluid types and number of liquid
levels. The LS05 housing stem, constructed of V2A stainless steel can
vary in length up to 6.5 feet long and hold any number of magnetic
floats with a minimum spacing of 1.5” between them. Its stainless steel
housing will withstand high pressure up to 12bar and temperatures up to
200°C when coupled with stainless steel floats. Choose from 10 different
magnetic floats ... |
|
|
|
|
|
Contact-Free Capacitive Level Switch Allows For Complete Media
Compatibility |
| |
|
Sensortechnics’
new CLW series detects point levels of liquids and granular or
pulverised materials without contacting the media. The user can easily
adjust a high and low switch point with a hysteresis of less than 25 mm.
The CLW device uses a new non-invasive capacitive sensor technology and
allows for complete media compatibility and sterility. Due to its
miniature size these level switches can be perfectly integrated into OEM
devices. The CLW sensor can be mounted to the outside of a container or
vessel and is able to measure through almost any non-metallic wall
material. The level switch is highly flexible and can be easily
calibrated to measure to the desired levels, media and application
set-up. The CLW series achieves a very high accuracy and reliability due
to an additional reference electrode which compensates for all changes
in ambient environmental conditions such as temperature and humidity.
Additionally, Sensortechnics can also provide continuously measuring
level sensors based on the same contact-free capacitive technology. ... |
|
|
|
|
Find
all manufacturers and suppliers of
level sensors, level switches
level detection |
|
|
WATER MANAGER SOLUTION: Transmission of
Water Level- and Temperature-Data via GSM/GPRS, Radio, or Internet |
| |
|
STS’ newly developed watermanager solution allows for
conveniently managing and reading data loggers from any location at any
time. In case of an out-of-limits condition, a warning message is
generated and transmitted automatically via SMS and e-mail. In this way,
a maximum degree of flexibility and cost efficiency is attained with
regard to the monitoring of water levels and temperatures of rivers,
lakes, ground water, sources, and boreholes. The measuring hardware for
GSM/GPRS and radio may be easily installed in a 2"-tube or 4"-tube and
it consists of 3 elements: * A highly accurate pressure and temperature
sensor with stainless steel or titan casing exhibiting a 0.1% accuracy
of the end-scale value as regards pressure/water level and a 0,3°C
accuracy with regard to temperature. The temperature of the medium may
range from -5 to 80 °C. ... |
|
|
|
|
|
Level Switch for Hazardous Areas |
| |
|
For
applications in gaseous and dusty surroundings, Baumer offers its
FlexLevel Switch 4401 in various ATEX versions. They enable a safe level
detection in hazardous areas. The ATEX certifications cover the zones 0,
1 and 2 as well as the zones 20, 21 and 22. The FlexLevel Switch can be
easily configured on PC via the FlexProgrammer 9701. When used with a
cooling neck, the switch is suitable for process temperatures from -40°C
to up to 200 °C. Explosive gas or dust mixtures can appear in many
industrial applications, e. g. in the chemical, pharmaceutical and even
the food industry. All FlexLevel Switch versions are available with the
following ATEX approvals: Ex ia for gas applications in zone 0, 1 or 2,
if protected by a zener barrier; Ex tD for dust applications in zone 20,
21 or 22 (for use without zener protection even in zone 20
applications); and Ex nA for gas applications in zone 2 without use of
zener barrier protection. All wetted parts are made of FDA-approved
acid-proof stainless steel or PEEK thermoplastic. The FlexLevel Switch
complies ... |
|
|
|
|
|
Laser Distance Meters LLD with an
extended temperature range |
| |
|
Measure
distances with millimeter accuracy. Define positions. Measure fill
levels. register motion processes. The LLD Series from WayCon
Positionsmesstechnik GmbH is a optoelectronic distance meter
designed for industrial applications. Measurements up to 150m are
performed precisely, fast and in a non-contact fashion using the
comparative phase shift method. Equipped with interface options such as
Profibus DP, SSI, RS232 or RS422 as well as selectable switching and
analog outputs, the sensors can easily be integrated into any industrial
infrastructure including fieldbus-driven process controllers. The
compact and robust design shape combines with low power consumption, and
the possibility to set specific device parameters warrants flexibility
in use. Optional heating enables indoor and outdoor operation at low
temperatures. ... |
|
|
|
|
|
Recalibratable Submersible Sensor ED752
for Water Treatment |
| |
|
With
the ED752, Baumer offers a pressure transmitter for all kinds of
hydrostatic level measurement and depth measurement. In case of a signal
drift, the zero point can be recalibrated. The device is characterised
by high accuracy and long-term stability. It is suitable for
applications in drinking water supply, hydroelectric power plants, flood
protection, wastewater, pools, reservoirs, lakes and rivers,
shipbuilding, and many industrial applications such as pump controls.
The ED752’s accuracy is 0.1 % F.S., and its long-term stability is 0.1 %
per year. The measuring range can be parameterised, which allows an
adaptation to customer-specific surroundings ... |
|
|
|
|
|
UPS 150 FB Series: Level measurement in
cavities with only 4mm diameter |
| |
|
SNT
Sensortechnik AG: Our UPS miniature ultrasonic sensors had a very
successful sales performance in 2008. Many industrial applications can
be solved with the standard model UPS 200, where optical, inductive or
capacitive sensors might have problems with detection. Furthermore with
the UPS sensors with analogue output a precise distance or level
measurement can be realized, with a precision of approx. 0.3mm. The
special version “FOCUS Beam” has been particularly successful in various
applications. It proved its advantage in the detection through very
narrow openings. Since the FOCUS Beam does not have any disadvantageous
blind range, one can place it very close (few millimeters only) to the
opening of a cavity. There the beam is only 3mm wide in diameter. This
allowed e.g. to measure the level in only 4mm wide honey comb shape
cavities as used in medical laboratory applications (see left picture
below) with an accuracy of only few 1/10mm. Of course such measurement
needs a precise alignment of the sensor axis and the cavity to be
measured. On the right side below the comparison of detection beams of
UPS 200 (standard sensor) vs. UPS 150 FB (FOCUS Beam sensor) is shown. ... |
|
|
|
|
Find
all manufacturers and suppliers of
level sensors, level switches
level detection |
|
|
Level Switch with Cooling Neck for High
Temperatures |
| |
|
For
its FlexLevel Switch 4401, Baumer offers a sliding connection
making the hygienic level switch suitable for high process temperatures
of up to 200 °C. The optional sliding connection is available in 100 and
250 mm length and can serve as a cooling neck or extension, for example
if the medium has to be reached through the tank insulation or the
level
detection has to be adjusted to a certain height. Thanks to the DN38
process connection, the sensor is excellently suitable for food and
beverage industry applications. For the use in hazardous areas,
different ATEX versions are available. The sliding connection enables
the sensor’s application either as a cooling neck in high media
temperature applications for a temperature ranges from -40 °C to a
maximum of 200 °C or as an extension for various installation options.
By using this method, the medium can be reached through a tank
insulation or from the top of a tank. Additionally, the sensor tip can
reach deeper into the tank in order to detect the correct level of
viscous media that stick to the tank wall. The FlexLevel Switch detects
the level of liquids, viscous fluids ... |
|
|
|
|
|
Level measurement in cavities with only
4mm diameter |
| |
|
SNT
Sensortechnik AG: Many industrial applications can be solved with
the miniature ultrasonic sensors series UPS, where optical, inductive or
capacitive sensors might have problems with detection. Furthermore with
the UPS sensors with analogue output a precise distance or level
measurement can be realized, with a precision of approx. 0.3mm, with
0…10V or 4…20mA output. The special version “FOCUS Beam” (center on
picture) has a focusing device for the ultrasound. It has been
particularly successful in various applications. It proved its advantage
in the detection through very narrow openings. Since the FOCUS Beam does
not have any disadvantageous blind range, one can place it very close
(few millimeters only) to the opening of a cavity. There the beam is
only 3mm wide in diameter. This allows e.g. to measure the level in only
4mm wide cavities with an accuracy of only few 1/10mm. The other special
version "CP" (Chemical Protection, right on picture) has a PTFE
diaphragm with a protective sleeve. This can be used as a level sensor
also in small containers with aggressive liquids. SNT Sensortechnik AG
is a specialist in ultrasonic sensors for ... |
|
|
|
|
|
Radiometric Measurements of Super-latives |
| |
|
BERTHOLD
Technologies: In the area of radiometric measurement technology the
trend is heading towards lowest possible source activities. Berthold
Technologies is pioneering these developments. With its state of the art
Super-Sens, the company provides the worldwide most sensitive
radiometric detector for measuring point level, continuous level and
density, setting new standards in source limitations. Compared to common
detectors, the source activity can be reduced by 70-95% when using the
Super-Sens detector. As an example the density measurement on a dredging
application can be taken, where a source activity of 185 GBq was
required in the past to solve the measurement task. By switching to
Super-Sens technique, the source size in this application was reduced to
5.5 GBq, which is equivalent to a factor of 34. The Super-Sens is
primarily used when vessels or pipelines with large diameter or high
wall thicknesses have to be penetrated. Furthermore, the Super-Sens is
the preferred solution when it comes to source exchanges, because
already existing sources can be used considerably longer when a Super-Sens
detector is ... |
|
|
|
|
|
Micronas presenting the smallest linear
Hall sensor with integrated EEPROM |
| |
|
Micronas,
a leading manufacturer and supplier of innovative and user-specific IC
and sensor system solutions for use in automobiles and in industry,
presents its HAL 1820, the first member of a new family of
value-optimized linear Hall sensors. The HAL 1820 is Micronas’ answer to
the market demand for an adaptable, robust and cost-effective sensor
with low space requirement for detecting the position, the direction of
movement or fluid levels, for current measurements and as an alternative
to conventional potentiometers. The HAL 1820 meets every quality
criteria of an automotive component, has best-in-class EMC capability
and features internal overvoltage and reverse voltage protection at the
power supply terminal. “The electrical characteristics of the sensor
such as field strength, sensitivity, offset and temperature coefficient
are stored in an internal EEPROM. ... |
|
|
|
|
|
Lab efficiency and safety |
| |
|
With
its comprehensive sensor technologies portfolio for laboratory
automation, Baumer offers sensors for presence detection,
position verification, level measurement, or object and code
identification. Test tubes and microwell plates are often tagged with
encoding, such as bar codes. Baumer Smart Vision solutions allow for
different encoding types to be detected safely and also offer a
character recognition function (OCR). The code identification can be
combined with a crosscheck against other relevant specifications. This
feature increases the efficiency by allowing several inspection tasks to
be easily and flexibly performed in one step. When working with
microwell plates, highest precision is everything. The new Series 09
ultrasonic sensors conduct non-contact and cross-contamination-free
liquid level sensing in microwell plates with an accuracy of a
microliter. It is possible to cascade the nine-millimeter wide sensors,
which facilitates scanning the different fill levels in a 96 microwell
plate ‘on the fly’ in the course of a single scanning. Certainty about
the fill levels is important for the early recognition of potential
mistakes and for the verification of the analytical findings. ... |
|
|
|
|
Find
all manufacturers and suppliers of
level sensors, level switches
level detection |
|
|
Mould Level Gauge |
| |
|
BERTHOLD
Technologies: The mould level gauge is used to measure the level of
molten steel in the moulds. The non-contacting measuring system detects
the actual level within a measuring range of approx. 100 to 300 mm. In
connection with a downstream control unit and an actuator, automatic
casting and fully automated cast-on becomes possible in many continuous
casting facilities. . ... |
|
|
|
|
|
Distributed level measurements via the
GSM network, Wireless communication with data loggers all over the world |
| |
|
Keller
AG has now developed a universal, energy-optimised
radio module with integrated data logger. The GSM-2 remote data
transmission unit and the free PC software allow you to conveniently
observe levels, measurements and trends and monitor limits from the
comfort of your office. This applies to groundwater levels, waste water
levels and the filling levels of mobile tanks on vehicles. However, it
also applies to completely different measurements from appropriate
sensors with suitable output signals. The cylindrical design of the
GSM-2 with a diameter of just 48 mm has been chosen so that the data
logger, which ”selfdials” in accordance with user requirements, can
simply be placed in the top of a normal 2-inch diameter sounding pipe
that is used in groundwater measuring equipment. Installation takes a
matter of seconds. The housing is designed to withstand condensation and
being under water for short periods. The GSM antenna is covered with a
lockable covering cap made from solid plastic. The data logger is
therefore protected from theft and vandalism when level measurements ... |
|
|
|
|
|
FlexLevel Switch 4401, configurable with
the FlexProgrammer |
| |
|
With
the FlexLevel Switch 4401, Baumer’s product segment Process
Instrumentation introduces a new hygienic level switch which is suitable
even for high temperatures up to 180°C. It can be easily configured on
PC via the FlexProgrammer 9701. A bright blue light on top of the switch
shows when a media is detected. The indication can be seen easily even
if the sensor is mounted on top of a tank. The FlexLevel Switch 4401 is
the successor of the LSM and will be available from June on. It has been
developed for hygienic applications, so all wetted parts are made of
FDA-approved acid-proof stainless steel or PEEK thermoplastic. The level
switch complies with the EHEDG demands and is prepared for the 3A
approval which makes it ideal for use in the food and beverage industry.
For applications in hazardous areas zone 0, zone 1 and zone 2, the level
switch is available in an ATEX version. Already preset ex works and
without any further adjustment, the FlexLevel Switch detects the level
of liquids, viscous fluids and even dry media. For particularly
difficult media like adhesive substances, the teach-in function enables
a manual adjustment of the level to be detected. The switching status
can be chosen as “normally opened” or “normally closed”. The output type
can be chosen as PNP, NPN or digital out by the programming unit. The
level switch can be ... |
|
|
|
|
|
Three new versions of Level Sensor Series
LS03 |
| |
|
MEDER
electronic AG: Three new versions of Level Sensor Series LS03 have
been introduced into the market to meet the wider demands of our
customers for special applications. These new versions are LS03 DL, GZ
and GK. The code DL stands for “Dichtung Lang” (German) meaning “long
sealing gasket”); GZ for “Gewinde Kurz” (German) meaning “short thread”;
and GZ for “Gewinde Zoll” meaning “Thread in Inches”. Different market
norms or usage customs have been also taken into consideration to
develop these three new versions. GZ Series has a thread that is usually
used in American market that even no sealing is necessary, therefore,
the cost is lower; DL Series has the norm more for European market and
suitable for low pressure and thin container walls, while the DK Series
is more robust in construction for a higher resistance against filling
pressures (up to at least 10bar). The new
level sensors of LS03 are
made respectively of PP or PA, or both. Under normal situations, level
sensors from the standard LS03 series are mounted inside the liquid
container to detecting the changes of liquid levels, but with more and
more sophisticated and ... |
|
|
|
|
|
New Capacitive Sensor Technology Allows
for Continuous and Contact-Free Level Measurement |
| |
|
Sensortechnics’
CLC series uses a new contact-free capacitive sensor technology to
continuously measure the fill level of liquids as well as granular or
pulverized materials. The miniature sensor can be easily mounted to the
outside of a container or vessel and is able to measure through almost
any non-metallic wall material. The level sensing range of the standard
device is up to 10 cm which can be enlarged in special multi-sensor
configurations. The non-invasive design, with no contact between the
sensor and the fluid, eliminates all media compatibility and sterility
issues. The device is highly flexible and the user can easily calibrate
the sensor to measure to the desired levels, media and application
set-up. The CLC series achieves a very high accuracy and reliability due
to an additional reference electrode which compensates for all changes
in ambient environmental conditions such as temperature and humidity. As
an optional safety feature the sensor can be supplied with an extra
sensing pad to detect if a container is actually present or not. The CLC
sensor offers an analog voltage output as well as a digital interface.
Sensortechnics can also provide modifications of its capacitive level
sensor ... |
|
|
|
|
Find
all manufacturers and suppliers of
level sensors, level switches
level detection |
|
|
Series DCX 16 Level Probes - Autonomous
Data Collectors with Ø 16 mm |
| |
|
KELLER
AG:
Level measurement: 1.5 billion people around the globe have no access to clean
water. Managing water as a resource is therefore the challenge of the
21st century. A significant part of the world’s water resources is
located underground. Large areas are surveyed using
pressure sensors to
monitor changes in the water level in relation to usage as well as
rainfall. These sensors are inserted in wells up to 200 m in depth. The
major share of the cost of a measuring point is caused by the drilling
operation and the pipe inserted into the earth. Until now, pipes with an
inner diameter of 1 inch (2,54 cm) were mainly used, required by 22 mm
diameter sensors. KELLER’s new DCX-16 features a Ø 16 mm diameter
without compromising exactness, enabling much lower ... |
|
|
|
|
|
Photoelectric Sensors - Level measurement
on standpipes |
| |
|
Baumer
Electric: User-friendly level measurement? Baumer’s new level
sensors are convincingly easy to handle. They can be mounted without
difficulty on a standpipe or a tube using the included cable tie. The
diameter of the (half) transparent standpipe on which the sensor can be
mounted can vary from 3 to 13 mm. Once they have been secured, no
further adjustments have to be made on the FFDK 16 as all required
circuitry is built in. However, a switch for dark or light switching
(D/L) is in place. In the optical fiber version, the fibers are arranged
in rows. This allows the sensor to suppress foam or air bubbles of up to
3 mm in size. Foam especially emerges often, and so far it has led to
many measurement errors with optical level measurement systems. Thanks
to the PFI material used, the sensor is also resistant to chemicals.
Another advantage of the optical fiber version ... |
|
|
|
|
|
The SENSation for radiometric Measurement
Systems |
| |
|
On
the 60th anniversary of the company, Berthold Technologies is
launching the new detector generation SENSeries to the market and is
setting new standards in the radiometric process control. The SENS-Detectors
stand out by their unique and extreme high sensitivity to gamma
radiation. New measurement accuracies can be achieved, well above those
possible with radiometric systems to date. The extremely high
sensitivity also means that existing sources can be used for a longer
period. Instead of an expensive source exchange, the life of the
existing sources can be extended by many years, or even decades, by
using a new SENS-detector. Moreover, in new projects the high
sensitivity results in a considerably high reduction of source activity.
Depending on the application, the source activity can be reduced by up
to 80%, to some extend even under the applicable activity underlying
authorisation obligation. These characteristics are guaranteed by a
patented process throughout the complete field of application and the
total service-life. The SENSseries offers a suitable detector solution
for each and every application. For the radiometric detection of
density, concentration or level switch, the CrystalSENS detector can be
used. In addition, rod detectors UniSENS and – for especially large
measuring ranges - TowerSENS are available for continuous level
measurements too. ... |
|
|
|
|
|
Ultrasonic Sensors - When a µ-liter makes
the difference |
| |
|
Baumer
Electric: In lab automation small containers such as microwell
plates or test tubes are used in analytical processes of liquids. Since
the liquids to be analyzed are often available in limited quantities
only, this market has been confronted with an ever increasing demand for
highly precise level measurement. Baumer is now responding to this
challenge with the new Series 09 ultrasonic sensors. They are capable of
measuring into wells with as little as 3,3 mm opening diameter,
providing a 0,1 mm resolution. This performance converted to a type 384
microplate results in a resolution of 1,09 microliters. Thus, the loss
of liquid can be kept within very tight limits. Additionally, the
measurement allows the detection of flaws at an early stage of the
analyzing process, which keeps the general process quality at a high
level. Efficiency concerning scanning speed is a further highlight of
the Series 09 sensors. Thanks to a housing width of less than 9 mm,
eight sensors arranged in-line are capable of scanning a type 96
microwell plate in one single cycle. The short response of as little as
seven milliseconds allows fast scanning rates, which in turn lead to
minimal process times. The benefit are a maximum of process quality at a
minimum loss of time. The range of applications for the new ultrasonic
sensors is far larger than the described liquid level measurement in ... |
|
|
|
|
|
JUMO temperature and level sensor for
commercial verhicles, construction and agricultural machinery |
| |
|
JUMO:
To keep an engine or gears in optimum working order, numerous parameters
have to be continuously monitored, with corrective intervention should
there be any deviation. Two of these parameters are the oil level and
the oil temperature. The combined temperature and level sensor aids
vehicle diagnostics in modern commercial vehicles, construction
machinery and agricultural machinery. With this level sensor, which uses
the hot-wire principle, it is possible to determine the level of the
gear oil or engine oil in a 150 mm measurement section. Only by
monitoring the level of the liquid can we be certain that the engine is
not running with too much oil, or that, unobserved, the level has
dropped to too little. Engine damage is avoided. The level sensor is
also available with an additional temperature sensor. The temperature
sensor is designed with a Pt1000 shunt resistor conforming to EN 60751,
Class B, in a 2-wire circuit. But Pt100 and Pt500 sensors, as well as
NTC and semiconductor sensors, are also possible. The hot-wire voltage
signal and the temperature sensor resistance signal are forwarded
separately to the vehicle electronics for evaluation. The JUMO
temperature and level sensor is designed for continuous operation at a
temperature ... |
|
|
|
|
Find
all manufacturers and suppliers of
level sensors, level switches
level detection |
|
|
Industrial Laser Distance Meters for
medium and long range Measurement |
| |
|
Jenoptik:
Fast, non-contact, precise and reliable. The compact laser distance
meters of the LDM41/42/43 series measure distances with millimeter
accuracy – also without reflectors. The phase comparison method allows
for absolute measurement results with repeated precision. Offering a
measuring range of 30 metern on natural surfaces, the sensors are
ideally suited for position determination of production goods, control
of hoisting gear or measurement of fill levels in silos. ... |
|
|
|
|
|
TROGAMID® Liquid Level Switches Feature Very High Chemical Resistance |
| |
|
Sensortechnics
introduces the new OLT liquid level switches for cost-effective optical
point level detection. These sensors feature very high chemical
resistance due to their TROGAMID® miniature plastic housings making them
suitable for a wide range of medical and industrial OEM applications.
The OLT series can be used with many liquids which are not compatible
with conventional polysulphone housings such as fuel, halogenated
hydrocarbons (e.g. chloroform), methanol, acetone and ethyl acetate.
Furthermore, TROGAMID® can also be used in direct contact with food and
drinking water. The optical OLT switches use solid state technology with
no moving parts to measure accurately and reliably the presence or
absence of liquid in tanks, reservoirs and pipes. The product range
includes basic devices with analog phototransistor outputs, switches
with microprocessor compatible TTL signals, or high power devices with
transistor outputs for switching currents up to 500 mA. With their
miniature threaded housings the OLT sensors are easy to install and
consume little space. Additionally, Sensortechnics can easily modify or
customise these products to fit special customer requirements. ... |
|
|
|
|
|
KROHNE presents innovative solutions for
energy measurement at INTERKAMA |
| |
|
KROHNE:
The energy market remains a growth market: Due to the increasing need
for power, there are currently more than 230 new power plants either
under construction or planned worldwide. According to estimates, more
than 800 billion Euros will be spent annually in the power plant
business until 2030. This includes not only new constructions but also
renovations of existing power plants. Measuring technology plays an
important role here: the deciding factor when it comes to the efficiency
of a power plant is the accuracy of the measurements. The more accurate
the measurements, the more efficient the power plant. That translates
into increased profit for the operator. Many countries continue to rely
on nuclear technology to safeguard their future power requirements. For
new constructions and the overhauling of existing plants, KROHNE offers
high temperature ultrasonic measuring devices, variable area flowmeter
and level meters which can be used in steam and water circuits. As the
only manufacturer of measuremnt technology in Germany, KROHNE has all of
the important approvals for the instrumentation of nuclear power plants:
KTA, RCC and the ASME N-stamp. At INTERKAMA 2009, KROHNE presented new
measurements solutions for the power generation market. The portfolio
includes flow, level and temperature measuring devices to cover the
measuring ... |
|
|
|
|
|
Ultrasonic limit switch |
| |
|
The
intelligent ultrasonic limit switch SONOCONTROL 40 from SONOTEC
controls the level of liquids and liquid gases. The new device of the
SONOCONTROL series is used as a non-intrusive level control system
through the wall, consisting of a probe, fastening, couplant and
evaluation instrument. The ultrasonic measurement method is applicable
in numerous industrial fields like the chemical industry, petrochemistry,
food industry and the pharmaceutical sector. The non-intrusive system
can be used for ride-height control, full-/empty signaling, protection
against dry running, position control, ice level control, limit control
in liquids and liquid gases and for air bubble- and solid detection. The
SONOCONTROL 40 combines application diversity with an outstanding
operating simplicity. The new innovative measuring method allows an easy
installation. The device can be factory-set for measuring tasks of
serial operations (plug-and-play). Additionally, the device consists of
an easy operating software, which also facilitates individual
measurement adjustments. The compact configuration of the ultrasonic
limit switch ... |
|
|
|
|
|
KTE2000CS Submersible OEM Transmitters Measure Low Liquid Levels From
0.5 m H2O |
| |
|
Sensortechnics’
new KTE2000CS submersible OEM pressure sensors offer precision
hydrostatic low level measurement from only 50 mbar (0.5 m water column)
Full Scale. The KTE2000CS series consists of highly accurate capacitive
ceramic pressure cells in a rugged stainless steel construction. They
feature excellent long term stability and are compatible with many
corrosive and aggressive liquids. The KTE2000CS transmitters are
calibrated and temperature compensated from -20…+70 °C and provide a
4...20 mA output signal. A special cable with an integrated vent tube
allows a true reference pressure to the sensor element and eliminates
errors due to atmospheric pressure changes. The sensor is protected
against environmental conditions to the IP68 standard and withstands
overpressures of up to 10 times the rated pressure. Important features
of the new KTE2000CS series are: - Low liquid level measurement from 50
mbar (0.5 m H2O) Full Scale - Capacitive ceramic pressure cells in a
rugged ... |
|
|
|
|
Find
all manufacturers and suppliers of
level sensors, level switches
level detection |
|
|
Highly sensitive radiometric detector on
fieldbus basis |
| |
|
BERTHOLD
Technologies GmbH & Co. KG: The Super-Sens detector which is
internationally renowned for its unmatched sensitivity, is now available
for the fieldbus systems HART, Profibus PA and Fieldbus Foundation. LB
490/491 Super-Sens combines highest sensitivity with the advantages of
the Uni-Probe detectors and can be used for continuous level measurement
or density measurement as well as level switch. With a high- quality
organic scintillator, which is considerably bigger than the ones
commonly used, the Super-Sens gains an outstanding high sensitivity for
gamma radiation. This property leads to extremely reliable measuring
results - even under difficult measuring conditions - by using smallest
intensities of radiation sources. Already existing sources can be used
considerably longer when installing the Super-Sens detector. Thereby, an
upcoming exchange of sources can be postponed by several years ... |
|
|
|
|
|
Capacitive Sensors - Aggressive media
safely detected |
| |
|
Baumer
Electric: In quite a number of fill level applications there are
liquids to be detected which require sensor housings and media
containers to be made of materials of strongly improved properties due
to their chemical reactivity. The new Baumer capacitive sensors provide
interesting new approaches to many of these challenging cases. Since the
sensors' electrical field of detection is capable of penetrating through
insulating materials such as plastics, glass, cardboard etc., non
invasive detection of both liquids and solid matter is possible from the
outside. Capacitive sensors can therefore monitor fill levels in closed
containers whilst being attached to the outside container wall. Compared
to sensing methods requiring direct contact with matter, there are a
number of advantages. On one hand, this approach provides an excellent
protection for the sensor itself, which assures a long live expectancy
as well as a high degree of process safety. On the other hand, the
medium to be detected or monitored cannot be contaminated by the
sensor’s housing. The detection behaviour of capacitive sensors is
influenced by the dielectric constant of the surrounding materials.
Certain limitations apply when detecting liquids and objects exhibiting
a low dielectric constant using the existing, flush-mounted capacitive
sensors ... |
|
|
|
|
|
Mobile level control |
| |
|
SONOTEC:
With the SONOCONTROLmobil it is possible to identify the filling level
of vessels, pipes or bottles through their non-transparent walls easily
and fast. The mobile ultrasonic sensor enables the detection of liquid
levels in pipes or containers, which have a diameter between 200 and
1000 mm. The system can be used for the control of liquids and liquid
gases. The sensor differentiates reliably between liquids and air/gas.
The user friendly and mobile device can be applied for the control of
filling levels after filling procedures as well as for service controls
of bottles, containers and pipes. There is no process interruption since
openings of systems or removals of bottles for weightings are no longer
necessary: - control of bottles filled with fire extinguishant - level
control of containers filled with aggressive fluid chemicals or
diesel/fuel oil - control of coolant tanks - function control of
installed level control devices ... |
|
|
|
|
|
Filling Contents in Tanks - Accurate,
digital, battery powered, waterproof |
| |
|
Under
the name of Castello, Keller AG has introduced a flexible,
modular system for the accurate indication of the content of a liquid in
a tank. Castello offers a user-friendly way to represent the pressure
measurement at the bottom of a tank as the quantity of remaining liquid.
At the push of a button, the microprocessor performs the calculations
using the information of the tank shape and dimensions and displays the
remaining tank content quantity on the clearly legible 5-digit LED
display in the desired unit (litres, gallons etc.). The easy to use
software to configure Castello is free of charge. It contains the most
current tank shapes. Other tank shapes can be easily integrated at the
factory. The exclusive use of absolute pressure sensors in the Castello
system eliminates the use of capillary vented cables with all the
problems associated with a gauge pressure measurement. The Castello
enclosure integrates an air pressure sensor, ranged between 0,8 bar and
1,3 bar absolute. The sensors to measure the hydrostatic pressure at the
bottom of the tank are calibrated from 0,8 to 1,8 bar abs for tanks up
to 5 m in height, and 0,8 to 2,3 bar abs for tanks up to 10 m in height.
The pressure difference, calculated by the μP, is the relative
hydrostatic pressure. ... |
|
|
|
|
|
Laser Distance Meter LDM43, with Profibus
and SSI Interface |
| |
|
Measuring
distances with millimeter accuracy. Precisely define positions.
Registering motion processes. Jenoptik: The LDM43 is an opto-electronic
distance meter for industrial applications. Equipped with a Profibus DP
interface, the LDM43 can easily be integrated into any fieldbus-driven
process controller. The additional SSI interface provides another
convenient option for controlled operation of the measuring device. A
compact and robust design shape combines with low power consumption,
selectable switching outputs and the possibility to set specific
application parameters to warrant flexibility in use. Benefits: *
Precise: phase comparison allows distances up to 150 meters to be
measured with millimeter accuracy. * Non-wearing: distances are reliably
determined in a non-contact procedure that requires no reflector within
a range of up to 30 m. * Accurate: an eye-safe easily perceivable
measuring beam is provided for pin-point alignment of the sensor.
Applications: * Distance measurement and determination of positions, *
Fill-level measurement, ... |
|
|
|
| |
|
More technical articles & products to this topic:
|
|
|
Find
all manufacturers and suppliers of
level sensors, level switches
level detection |
|
| |
|
Find all Sensors &
Measurement devices
- Access to the Sensor Data base -
Sensors & Measuring
Systems Start page
|
|
|
|
|
| |
|
Copyright ©
Sens2B
International
Sens2B - Sensor to Business
Sens2B - Sensor to
Business is the international measurement technology and sensor suppliers directory / sensors portal.
Sens2B - Sensor to Business does not manufacture or sell any sensors or
measuring devices.
You will find in Sens2B - Sensor to Business database international sensor
companies, international manufacturers, suppliers and distributors of
all kind of sensors, transducers, transmitters, measurement instruments,
devices, probes, meters and detectors.
Powered by
Sens2B - WebDesign
***
Sensors: English /
Sensoren: Deutsch /
Capteurs: Français /
Sensores: Español /
Sensori: Italiano
Top-News: English
(sensors) /
Top-News: Deutsch (Sensoren) /
Top-News: Français (capteurs)
About us /
Contact us /
Conditions of use /
Registration /
Sensors by application /
Newsletter /
Sensor Categories Overview
Partners &
Links /
Sens2B- Reports (Sensor
Suppliers & Sensor Reports) |
|
|
