Sens2B
Sensor to Business
100% Sensors, Detectors
& Measurement Devices
   
 Sens2B - Sensors & Measurement Homepage
 
English pages Deutsche Seiten Pages en Français Páginas en Español Pagine in Italiano

 

Welcome to the world of measurement & sensors technology. Read up-to-date measurement & sensors technology news and search for worldwide manufacturers, suppliers of sensors, detectors & measuring devices.

Search Sensor & Measurement Suppliers & News
- Access to the main pages -


The Sensor to Business - sensors & measurement database:
Find sensor manufacturers, sensor suppliers and suppliers of measuring devices in the following categories:

Applications, measured properties:

Other categories

Suppliers of sensors & measurement devices by country

Sensor & measurement suppliers by region. Find all measuring devices & sensor manufacturers, international sales offices, local sensor technology representatives and distributors listed by country / regions.


Sensors & Measurement news:


Sensor & Measurement news in other languages


Now Available: Direct Wire Wound Replacement Through Thin Film Technology
 
thin film platinum RTD temperature sensorsThrough design and material selection efforts, Innovative Sensor Technology has developed a platinum thin film RTD to directly replace wire wound technology at half the cost. Class A Rating From -200°C to +600°C: IST’s new PW and PG series thin film platinum RTD temperature sensors are capable of achieving DIN 60751 class A accuracy in the temperature range of -200°C to +600°C. The PW series features a temperature coefficient of 3850 ppm/K, while the PG series offers a temperature coefficient of 3911 ppm/K. The sensors also feature outstanding hysteresis characteristics. Wire Wound Performance at Half the Cost: Due to smaller dimensions, the PW and PG series sensors can be manufactured at lower material costs, allowing for the sensors to be offered at half the price of wire wound technology. The smaller thin film dimensions also lead to packaging versatility and much faster response times than those achieved by wire wound sensors. ...





+ Info

Sensor Technology provides the key to learning
 
Sensor Technology Ltd: The electrical machines laboratory at the Dublin Institute of Technology (DIT) has greatly increased in its effectiveness as a teaching resource since TorqSense non-contact torque sensors from Sensor Technology have been fitted to five machine sets. The new sensors replace an existing system of machine monitoring that had proved inaccurate. To provide maximum flexibility, the demonstration equipment in the DIT machines laboratory employs modular construction. This means, for example, that experiments with both AC and DC machines can be carried out on the same test bed, as whichever machine is needed is simply clamped into place. Whatever the configuration of the equipment, however, the experiments and demonstrations performed in the laboratory require the monitoring and collection of a number of key operating parameters, including torque, speed and power. ...





+ Info
 

All sensors & Measuring devices Homepage

 

Find all sensor & measurement suppliers & news
- Access to the database -

 
 

Sens2B - Sensor to Business
100% Sensors, Instruments & Measuring Devices

The International Sensors, detectors & measurement Portal
Manufacturers and suppliers of sensors & measurement devices

Sensors & measurement news

and technical articles
in week 22 / 2010:


AED digital transducer electronics for analog SG transducers
 
With the AED transducer electronics, analog strain gage transducers can be easily and directly integrated into a digital environmentHBM: When analog transducers using strain gage technology (SG) are integrated into a superordinate system, the analog signals usually have to be digitized. HBM’s new AED transducer electronics are now available for this purpose. They make it very easy to integrate analog standard load cells into a digital environment. Transducer electronics are equipped with different fieldbus interfaces, such as CANOpen, DeviceNet and Profibus DP V1, as well as serial RS232 and RS485 interfaces. It is quick and easy to activate the AED via these interfaces with a PC, for example. Efficient digital filters, sampling rate adjustment, characteristic curves, linearization and more than 100 structured commands can be parameterized in this way. The different fieldbus interfaces ensure that there is never any problem integrating into a wide variety of superordinate applications. All the inputs and outputs of the transducer electronics are electrically isolated. Use under harsh ambient conditions is also assured by degree of protection IP65. The compact AED can thus also be installed right next to the strain gage transducer. ...





+ Info

New Stainless Steel OEM Pressure Sensors Offer High Accuracy Over a Wide Temperature Range and Digital Outputs
 
Stainless Steel OEM Pressure SensorsSensortechnics’ new SSI stainless steel OEM pressure sensors accurately measure gage or absolute pressures in ranges from 200 mbar up to 35 bar. These devices offer excellent stability and repeatability, achieving a Total Error Band (TEB) better than ±1.5 %FSS over a temperature range of -20…+85 °C. Sensortechnics’ SSI pressure sensors use precision digital signal conditioning and provide both analog 0.5…4.5 V output as well as digital I²C or alternatively SPI interfaces at the same time.microprocessors. The SSI series features an excellent price/performance ratio. Fully welded, media isolated rugged stainless steel constructions allow for high media compatibility with corrosive liquids and gases. Available packaging options include diaphragm versions with weld ring or housings with G 1/8 threaded pressure ports. Sensortechnics’ customisation service can provide very fast and flexible mechanical or electronic modifications of its SSI pressure sensor series to fit each customer’s application specific requirements. Important features of the SSI pressure sensor series are ...





+ Info

Chemical industry to benefit from head-mounted and rail-mounted temperature transmitter
 
OPTITEMP TT 51 temperature transmitterKROHNE introduces the new OPTITEMP TT 51 temperature transmitter. The device was especially designed for use in the chemical industry. In keeping with industry requirements, the transmitter guarantees accurate measurements over the long term and superior reliability. For use in safety-related applications, the OPTITEMP TT 51 features SIL2 approval as per IEC 61508. Constant measuring accuracy over a long period of time is crucial when it comes to monitoring process temperatures. The OPTITEMP TT 51 features a newly developed electronic system that boasts a long-term measuring error of just 0.05% of the span. Considered over a period of five years, the long-term error is a mere quarter of the drift of comparable temperature transmitters. The superior reliability of a measuring station equipped with an OPTITEMP TT 51 temperature transmitter can be attributed to more than one principle. The OPTITEMP TT 51 features SmartSense insulation monitoring to detect moisture in the measuring insert. If the measuring insert (and the sensor element) absorbs moisture, the electrical isolation resistance immediately decreases, resulting in a measurement error. ...





+ Info

New and Innovative Sensor Technology Offers Unmatched Sensitivity for Differential Low Pressure Measurement
 
LBA series offers differential low pressure measurementSensortechnics’ new LBA series offers differential low pressure measurement with ranges of 250 and 500 Pa Full Scale. The LBA sensors perform fully analog on-chip CMOS signal conditioning to allow for linear and temperature compensated outputs with high differential pressure resolution of typ. 0.1 % and fast response times of typ. 1 ms. The LBA sensors feature superior sensitivity and offset stability. The devices are based on thermal flow measurement of gas through a micro-flow channel integrated within the sensor chip. This very narrow channel decreases the flow through the LBA sensor by several magnitudes compared to other flow-based pressure sensors. The extremely low gas flow ensures high immunity to dust contamination and condensation and allows the use of connecting tubes and input filters without the need to recalibrate or correct the output signal. Because the flow impedance is predefined at the sensor chip level the LBA series provides very small and cost-effective PCB-mountable housings. Important features of the new LBA series are ...





+ Info

The piezo plays detective, Ultrasonic transducers in air-bubble detectors (ABD)
 
Bubble detectors based on ultrasound technology provide non-contact monitoring of the flow (Picture: Sonotec Ultraschallsensorik Halle GmbH)PI Ceramic (PIC): In medical engineering it is often necessary to ensure there is an undisturbed flow with no air or gas pockets. This is achieved with the aid of ultrasonic technology in so-called bubble or air-bubble detectors (ABD). Piezoelectric components from PI Ceramic are used as the ultrasonic transducers. They generate and receive the ultrasonic waves for these sensors. The sensors are mounted on the outside of flexible tubes and operate under sterile conditions without coming into contact with the medium to be transported; they therefore do not interfere with the flow rate, nor is there any danger of contamination. The bubble detector detects air bubbles in flexible plastic tubes filled with liquid, regardless of the color of the medium. Permanent monitoring of the flow is particularly essential for dialysis, transfusion pumps or heart-lung machines ...





+ Info

Colibrys signs Pewatron AG as distributor for its standard motion sensors in Switzerland and custom products world-wide
 
Colibrys (Switzerland) Ltd signed a distribution agreement with Pewatron AG for their motion sensorsColibrys’ partnership with Pewatron will strengthen its presence and level of sales support throughout Switzerland and world-wide for customer specific products. This collaboration will increase visibility and business potential of both companies in the Mil/Aerospace, Industrial and Instrumentation markets. "The contract with Pewatron has come about as a direct consequence of an increasing demand from a broad range of applications for our family of inertial accelerometers, precision tilt, vibration and seismic sensors. Customers working in harsh environment, precision and safety critical applications demand an ever higher level of support to optimize integration into their systems. Pewatron provides the knowledgeable application specific support required for these ranges of products along with a strong regional presence and long standing reputation for excellent after-sales support" said Jean-Michel Stauffer, VP Sales & Marketing from Colibrys. "Our partnership with Colibrys provides Pewatron the opportunity to offer our customers access to some of the best MEMS motion sensors available in the market ...





+ Info

Miniature Pressure Transducer has Flush Diaphragm, Zero Dead Volume
 
Miniature Pressure Transducer with Flush Diaphragm, Zero Dead VolumeStellar Technology: The Series FT290 pressure transducers are designed for those applications requiring both a standard NPT male process connection and a flush diaphragm with zero dead volume. These pressure sensors are designed with a unique diaphragm design which reduces stress levels caused by torquing a tapered thread into the mating fitting. Besides their small size (only 3.5 oz.), these pressure sensors are constructed of all welded stainless steel and can withstand demanding application environments. The FT290 covers ranges from 2,000 to 10,000 psia/psig and provides 3mV/V full scale output with 10vdc excitation. Static accuracy is ±0.25% (BFSL). The operating temperature is -100°F to +300°F, and the compensated temperature range is from -65°F to +250°F. Additional design features include low sensitivity to shock and vibration, and infinite resolution. The compact size of the Series FT290 pressure transducer makes it ideal for many metering and dispensing applications. ...





+ Info

Ethernet Interface for RoaDyn® System 2000 Allows Evaluation of Measurement Data from Wheel Force Transducers with SCADAS Durability Recorder from LMS
 
Mobile recording of wheel forces with Kistler RoaDyn® wheel force transducer on quad bike using LMS SCADAS Durability RecorderMeasurement data from Kistler wheel force measuring systems can now also be recorded and evaluated with the SCADAS Durability Recorder, a mobile data acquisition system from LMS. LMS has developed the Wheel Force Transducer Module (WF12) for connecting Kistler's electronic RoaDyn System 2000. The System 2000 acquires and transfers data from Kistler's wheel force measuring systems and can be networked with other measuring systems. With WFI2, LMS is the second renowned manufacturer of data acquisition systems to include in its range a synchronous digital Ethernet-based interface for Kistler's wheel force transducer systems. The interface is based on Kistler's proprietary UDP protocol for high-speed synchronous transmission of data to acquisition systems. Two RoaDyn systems, each with four wheel force transducers, can be connected to the WFI2. It then records all 8 relevant channels (3 forces, 3 torques, angle and angular velocity) of each transducer simultaneously. ...





+ Info

PBX Secure direct opening action switches, A range for the most demanding applications
 
PBX microswitches, position sensorsThe launch of the PBX Secure range of direct opening action switches marks an important stage in the development of Crouzet's Position Sensors business. Crouzet combines expertise with innovation and a genuine desire to respond to the needs of integrators and OEMs in the railway sector and the electrical industry. The PBX Secure direct opening action switch guarantees contact opening and closing. Its standard dimensions comply with standard DIN 41 636-6 form F and ensure it can be integrated in any application. Switches designed for severe environments. Crouzet, with over 60 years' experience in industries requiring safety and reliability, has launched the PBX Secure range, thus strengthening its position in the railway market by offering numerous onboard applications for both inside and outside the rolling stock, including joystick controller, emergency stop, door opening, medium-voltage circuit-breaker and braking system applications. A leading manufacturer in the electrical industry, with more than 30 families of microswitches and limit switches ...





+ Info
 

Sensors & Measurement News in week 21 '2010    <<   >>  Sensors & Measurement News in week 23 '2010


 

All sensors & Measuring devices Homepage

 

Find all sensor & measurement suppliers & news
- Access to the database -

 
 
 
 

 

 

 

Copyright © Sens2B International
Sens2B - Sensor to Business

Sens2B - Sensor to Business is the international measurement technology and sensor suppliers directory / sensors portal. Sens2B - Sensor to Business does not manufacture or sell any sensors or measuring devices. You will find in Sens2B - Sensor to Business database international sensor companies, international manufacturers, suppliers and distributors of all kind of sensors, transducers, transmitters, measurement instruments, devices, probes, meters and detectors.

Powered by Sens2B - WebDesign

***

Sensors: English / Sensoren: Deutsch / Capteurs: Français / Sensores: Español / Sensori: Italiano
Top-News: English (sensors) / Top-News: Deutsch (Sensoren) / Top-News: Français (capteurs)
About us / Contact us / Conditions of use / Registration / Sensors by application / Newsletter / Sensor Categories Overview
Partners & Links / Sens2B- Reports (Sensor Suppliers & Sensor Reports)