| |
|
Welcome to
the world of measurement & sensors technology.
Read up-to-date measurement & sensors technology news and search for worldwide manufacturers, suppliers
of sensors, detectors & measuring devices.
Search Sensor & Measurement Suppliers &
News
- Access to the main pages - |
|
The Sensor to Business -
sensors & measurement database:
Find sensor manufacturers, sensor suppliers
and suppliers of measuring devices in the following categories: |
|
|
Applications,
measured properties:
-
Sensors & measuring systems for position,
dimension
(e.g.:
angle sensors, displacement sensors, distance sensors, elongation
sensors, gap sensors, inclination sensors, light barriers,
limit indicators, position indicators, position sensors, proximity switches,
rotary position sensors, thickness sensors, tilt sensors, etc...)
-
Sensors & measuring systems for mechanical /
dynamic properties
(e.g.:
acceleration sensors, force sensors, inertial sensors, motion
sensors, rotational sensors, shock sensors, speed sensors, strain sensors, torque
sensors, vibration sensors, viscosity sensors, weight sensors, yaw rate sensors, etc...)
-
Sensors & measuring systems for pressure, flow
and level
(e.g.:
absolute pressure sensors, differential pressure sensors, flow sensors,
gas flow sensors, gas pressure sensors, level sensors, liquid level sensors, mass flow sensors, microflow sensors, etc...)
-
Sensors & measuring systems for
chemical, biological & environment
(e.g.:
air quality sensors, alcohol sensors, ammonia sensors, carbon
dioxide sensors, chemical sensors, chlorine sensors, CO2 sensors, environmental
sensors, gas sensors, hydrocarbon sensors, hydrogen sensors, ozone sensors, oxygen sensors,
pH sensors, etc...)
-
Sensors & measuring systems for
temperature, humidity, weather
(e.g.:
air pressure sensors, atmospheric sensors, climate sensors, dew
point sensors, heat flow sensors, humidity sensors, meteorological sensors, rain
sensors, smoke detection sensors, solar sensors, temperature sensors, wind sensors, etc...)
-
Sensors & measuring systems for optical and
radiation properties
(e.g.: barcode readers, color sensor, colour sensors, fluorescence
sensors, infrared
sensors, light sensors, luminescence sensors, luminosity sensors, radiation sensors,
turbidity sensors, ultraviolet sensors, UV Index sensors, visible light sensors,
etc...)
-
Sensors & measuring systems for body, human and
medical properties
(e.g.:
biomechanics sensors, blood analysis sensors, blood flow sensors, blood pressure sensors,
body temperature sensors, breath sensors, fingerprint sensors, heart
rate sensors, human
identification sensors, Human motion sensors, etc...)
-
Sensors & measuring systems for electrical and
magnetic properties
(e.g.:
electrical sensors, magnetic sensors, current sensors, eddy current
sensors, magnetic field sensors, eddy current sensors, electrical
field sensors, voltage sensors, etc...)
-
Sensors & measuring systems for vision, identification,
comparison
(e.g.:
camera sensors, image sensors, code detection sensors, object
detection sensors, object
comparison sensors, object counting sensors, object identification
sensors, vision sensors, etc...)
-
Sensors & measuring systems for acoustic
properties
(e.g.:
noise sensors, loudness sensors, microphone sensors, sound analysis
sensors, ultrasound sensors, etc...)
Other
categories
-
Related Instruments & Measurement
devices
(e.g.:
Test & Measuring devices, Bus systems, Calibration, Connection
technology, Controllers & regulators, Data acquisition & logging,
Display & visualization, Measuring electronics, PC technology,
Sensor Interface ICs, Signal amplification, Software, Wireless
Sensor Networks, Signal conditioning, Signal transmission, ...)
-
Technologies and
measurement principles
(e.g.: capacitive sensors, CCD sensors, Encoders, fibre-optic
sensors, Hall sensors, inductive sensors, infrared sensors, laser
sensors, load cells, LVDTs, magnetic sensors, MEMS, optical sensors,
piezoelectric sensors, strain gauge elements, thermocouples,
ultrasound sensors, ...)
-
Sectors of activity / of application
Suppliers of sensors & measurement devices by country
Sensor & measurement suppliers by region. Find all measuring
devices & sensor manufacturers,
international sales offices, local sensor technology
representatives and distributors listed by country / regions. |
|
|
Sensors & Measurement news:
|
|
|
Sensor & Measurement news in other languages |
|
|
|
|
|
|
|
Photoelectric Sensors - Level measurement
on standpipes |
| |
 Baumer
Electric: User-friendly level measurement? Baumer’s new
level
sensors are convincingly easy to handle. They can be mounted without
difficulty on a standpipe or a tube using the included cable tie. The
diameter of the (half) transparent standpipe on which the sensor can be
mounted can vary from 3 to 13 mm. Once they have been secured, no
further adjustments have to be made on the FFDK 16 as all required
circuitry is built in. However, a switch for dark or light switching
(D/L) is in place. In the optical fiber version, the fibers are arranged
in rows. This allows the sensor to suppress foam or air bubbles of up to
3 mm in size. Foam especially emerges often, and so far it has led to
many measurement errors with
optical level measurement systems. Thanks
to the PFI material used, the sensor is also resistant to chemicals.
Another advantage of the optical fiber version ... |
|
|
|
|
|
|
+ Info |
|
|
|
|
New optoNCDT1402 laser sensor from
Micro-Epsilon |
| |
 The
new optoNCDT1402
laser sensor from Micro-Epsilon replaces the
company’s previous optoNCDT 1401 product. The new sensor provides
improved performance and extreme flexibility. This flexibility comes
from a brand new Teach-In function, which can be used to limit or change
the measuring range for each application. In this way, both the
resolution and the linearity of the sensor in the pre-set measuring
range can be significantly improved. This is of particular benefit in
applications where only a small measuring range but high performance is
required. The flexibility of the optoNCDT 1402 is further enhanced by an
integrated swivelling cable connector, which can be used to change the
direction of the cable output to suit the individual application. By
utilising a CMOS sensor, the optoNCDT 1402 has an increased measuring
rate of 1.5kHz making it suitable for rapid processes. An RS422 digital
interface is provided, as well as analogue current / voltage output. As
before, the new series comprises seven sensors, which have measuring
ranges between 5mm and 250mm. Together with the integrated controller,
the very compact design makes mounting faster and easier and
installation is possible in ... |
|
|
|
|
|
|
+ Info |
|
|
|
|
|
Top-7 Sensors &
Measurement News |
|
|
|
Find all sensor & measurement suppliers &
news
- Access to the database - |
|
|
|
|
|
Sens2B - Sensor to Business
100% Sensors,
Instruments &
Measuring Devices |
The International Sensors,
detectors & measurement Portal
Manufacturers and suppliers of sensors & measurement devices |
|
|
Sensors &
measurement news
and technical articles
in week 34/2009: |
|
|
|
|
|
PCB Piezotronics Announces New Dual
Bridge Strain Gage Load Cells for Aircraft Structural Testing |
| |
 PCB
Piezotronics, Inc., introduces a broad range of Strain Gage Dual
Bridge Load Cells specifically for airframe structural test
applications. PCB® Series 1200 includes a dual output feature that
offers sensor redundancy and the ability to provide control feedback
from one sensor while the other is used for data acquisition. These load
cells are available in multiple ranges and have an A2LA accredited
calibration to ISO 17025 in both tension and compression directions.
Additional features include low deflection, high accuracy and
repeatability, thermal compensation and barometric compensation. PCB®
Load Cells are available with capacities ranging from 500 lb to 50,000
lb (2.2 kN to 220 kN). Fatigue rated styles are also available and
guaranteed for 100 million fully-reversed cycles. In addition to dual
bridge load cells for airframe structural test, other
load cells are available including low profile, rod end, S-beam, and
pedal effort for applications such as weighing, material testing, press
monitoring, process automation, rocket thrust, component testing, and
automotive durability or drivability. ... |
|
|
|
|
|
|
+ Info |
|
|
|
|
Melexis
automotive position sensor with
SENT protocol lowers cost and improves performance under hood |
| |
 SENT
protocol for Engine Management devices gains support with launch of
first fully integrated SENT
rotary position sensor IC, MLX90324 by
Melexis. High temperature performance and integrated support for the
SENT (Single Edge Nibble Transmission) characterize the new MLX90324.
Under-hood position sensor applications like EGR, manifold actuation,
diesel throttle body, drive-by-wire pedals and other rotary, high
precision
position sensors become simpler, more reliable and more cost
effective. The increased demand for sensors to meet new green standards
in engine design can be well supported by Melexis MLX90324. This newest
member in the Triaxistm family extends the features of previous award
winning Triaxistm rotary position sensor ICs. The MLX90324 implements
the SENT protocol–also known as SAE J2716-Apr07 directly on chip for
reporting functions and gains improved performance at high temperature. ... |
|
|
|
|
|
|
+ Info |
|
|
|
|
PBX microswitches for industrial and
railway equipment |
| |
 The
PBX is the latest newcomer to Crouzet’s range of microswitches
for industrial and railway equipment. It has been developed and tested
in compliance with current standards (EN 60 947, DIN 41 636 type F, NF
EN 50 124-1, NFF 16 101/102). The electrical configuration of this
switch is based on a double insulated failsafe circuit (1 NO + 1 NC)
with two types of contact (silver or gold-plated silver) available,
based on the voltages and switching loads involved. Available in IP40,
IP 65 or IP67 versions, the sealing design is patented. The PBX has a
mechanical service life of 10 million cycles and features a long
pushbutton travel range after reaching the electrical switching point,
which helps to absorb any deviations from mechanical tolerances during
equipment wear over time. The modularity of the range means that there
is a vast range of readily available configurations ... |
|
|
|
|
|
|
+ Info |
|
|
|
|
Results of the visitor poll for
SENSOR+TEST 2009 now available |
| |
 AMA
Association for Sensor Technology: Even in economically difficult
times, the SENSOR+TEST is staying on its successful track. This
conclusion was already indicated at the end of the fair and is now
confirmed by the results of the visitor poll. A neutral market research
institute carried out polls during the three days of the fair regarding
the competence and motivation of the visitors. In a further poll, the
majority of the exhibitors proved to be clearly satisfied. Although the
number of visitors was slightly lower compared to last year, the
expectations of the exhibitors at the fair were exceeded. „Obviously
we’re not happy about the decrease in visitor figures of about 11%
compared to last year. However, under the present conditions, that’s a
positive value,” sums up Holger Bödeker, managing director of AMA
Service GmbH, the fair organisers. An especially gratifying aspect, he
says, is that the proportion of foreign visitors could be maintained at
the high level of the previous fairs. This has not only contributed to
the positive overall result, he stated, but is also a sign for the
increasing international importance of the event. ... |
|
|
|
|
|
|
+Info |
|
|
|
|
Balluff distance measurement – the best
solution for all your applications, Compatible sensor systems increase
added value |
| |
 The
sheer variety of different tasks in the automation industry creates a
need for a wide range of different sensor system solutions. Balluff
draws from a comprehensive portfolio that currently incorporates six
different
distance measurement principles in order to offer its
customers the best cost-effective solution while ensuring maximum
functional reliability and flexibility. Whether injection molding
machines, placement machines, drives or material inspection equipment –
operating any of these without an automated movement detection system
would be unthinkable. A range of distance measurement principles that
are predestined for special areas of application on the basis of
specific characteristics have been developed precisely for this purpose.
The decision to select specific sensors for distance measurement depends
on requirements. Optimized solutions for greater efficiency: Balluff has
extended its distance measurement portfolio to offer the best solutions
for specific requirements. Distance measurement systems can only achieve
satisfactory results when adapted perfectly to the application in hand.
In this respect, Balluff is far superior to suppliers that only offer a
single distance measurement ... |
|
|
|
|
|
|
+ Info |
|
|
|
|
Miniature Column Load Cell with USB
Option |
| |
 FUTEK
Advanced Sensor Technology, Inc. (FUTEK) is offering their Miniature
Column Load Cell with a USB output option. The LCA300 is a Compression
Load Cell built for compact press applications. Similar to FUTEK’s
larger column
load cell models, the LCA300 may be used in press
applications but on a smaller scale where space is limited.
Traditionally a Load Cell is placed in the center of a press and can
produce one function depending on the type of press application. FUTEK
has come up with an advanced and smarter system in order to help users
receive full benefit in their applications. Using multiple Miniature
Column Load cells with a USB output you can monitor each output of the
multiple sensors easily and more effectively. Handling is lighter and
much more manageable. It is also very helpful in batch type press
applications producing higher amounts of output without worrying about a
malfunction of your load cell disrupting your entire output process. The
LCA300 Column Load Cell which is now available with USB Output
eliminates several factors such as the need for an analog amplifier,
power supply, and display equipment. The elimination of those extra
factors makes usage easy to use and much more effective. Measurement is
also less affected by noise, temperature variation or power supply
requirement with this simple plug and play system. With this USB
integration you can have the power to monitor the output of the sensor
which ... |
|
|
|
|
|
|
+ Info |
|
|
|
|
End-of-travel monitoring on hydraulic
cylinders, High pressure rated M8 and M5 sensors with small footprint |
| |
 Balluff
has expanded their proven product line of high pressure rated
inductive
sensors in M12 and M18 housings to include miniaturized form factors.
Ideal applications for these 350 bar rated miniature sensors in M8 and
M5 housings include industrial and mobile hydraulics as well as valve
technology. The new, miniaturized sensors, which are currently offered
only by Balluff, open up a variety of new application possibilities for
the user. Their compact size is ideal in miniaturized power units and
valves as well as hydraulic block cylinders as used for example to
actuate slides on injection molding machines. The IP68 rated housing of
these flush-mountable sensors is made of stainless steel, with a ceramic
sensing surface. The sealing design is the same as for their
tried-and-true M12 and M18 bigger brothers: here also a clever O-ring
and support ring combination ensures high pressure resistance. The new
sensors, which offer a maximum switching frequency ... |
|
|
|
|
|
|
+ Info |
|
|
|
|
Cognex Introduces DataMan 200 ID Reader,
World’s smallest fixed-mount reader adds Ethernet connectivity and
liquid lens technology |
| |
 Cognex
Corporation has announced the newest addition to its DataMan® family
of
ID readers. The new DataMan 200 adds Ethernet connectivity and liquid
lens technology to the world’s smallest high performance fixed-mount
reader. These new features enable faster communication speed, easier
integration with factory controls, and software-driven autofocus for
easy, hands-free setup. “The DataMan 200 combines the powerful reading
performance and ultra-small size of the DataMan 100 with engineering
innovations that improve connectivity, speed and ease of use,” said Carl
Gerst, Sr. Director of ID Products. “The system is the first image-based
reader to feature full Ethernet connectivity in a package the size of a
matchbox. It is also the first to offer liquid lens technology, which
makes it ideal for applications that have variable focus requirements.”
Ethernet connectivity gives DataMan 200 users the advantage of real-time
data and image transfer, and easier integration with plant controllers
and information ... |
|
|
|
|
|
|
+ Info |
|
|
|
|
H250 M40 – Intelligent modularity, The
new standard in variable area technology |
| |
 Since
its foundation in 1921, KROHNE has led the field in variable area
measurement technology and is once again setting new standards with the
new H250 M40 variable area
flowmeter: The device features a complete
modular design, enabling it to be individually configured for virtually
any requirement. From pure analogue use without auxiliary power to
integration into a fieldbus system, whether it's intrinsically safe or
in an explosion-proof enclosure, vertical, horizontal or even installed
in a fall pipe – H250 M40 variable area flowmeters cover the entire
spectrum of requirements in the process industry. The H250 M40
flowmeters, based on the variable area principle, are very versatile and
can be used for gases as well as conducting and non-conducting liquids.
The sturdy all-metal version ensures high resistance to pressure,
temperature and product and can withstand extreme usage and ambient
conditions. This makes them a cost-effective and reliable standard
solution for the process industry. The devices have a modular, scalable
design, right from the purely mechanical display down to the electrical
signal outputs. The H250 is available in nominal sizes DN15 - DN100 in
various materials and connection variants. Typically, variable area
flowmeters are installed upright ... |
|
|
|
|
|
|
+ Info |
|
|
|
|
|
|
Sensors & Measurement News in week 33 '2009 <<
>>
Sensors & Measurement News in week 35 '2009 |
|
|
|
|
Top-7 / All Sensors &
Measurement News |
|
|
|
Find all sensor & measurement suppliers &
news
- Access to the database - |
|
|
|
|
