Sens2B
Sensor to Business
100% Sensors, Detectors
& Measurement Devices
   
 Sens2B - Sensors & Measurement Homepage
 
English pages Deutsche Seiten Pages en Français Páginas en Español Pagine in Italiano

 

Welcome to the world of measurement & sensors technology. Read up-to-date measurement & sensors technology news and search for worldwide manufacturers, suppliers of sensors, detectors & measuring devices.

Search Sensor & Measurement Suppliers & News
- Access to the main pages -


The Sensor to Business - sensors & measurement database:
Find sensor manufacturers, sensor suppliers and suppliers of measuring devices in the following categories:

Applications, measured properties:

Other categories

Suppliers of sensors & measurement devices by country

Sensor & measurement suppliers by region. Find all measuring devices & sensor manufacturers, international sales offices, local sensor technology representatives and distributors listed by country / regions.


Sensors & Measurement news:


Sensor & Measurement news in other languages

 

Mould Level Gauge
 
Mould Level GaugeBERTHOLD Technologies: The mould level gauge is used to measure the level of molten steel in the moulds. The non-contacting measuring system detects the actual level within a measuring range of approx. 100 to 300 mm. In connection with a downstream control unit and an actuator, automatic casting and fully automated cast-on becomes possible in many continuous casting facilities. . ...





+ Info

Sierra Introduces Ultrasonic Thermal Energy Flow Meter For Liquid Energy Consumption Measurement
 
Ultrasonic Thermal Energy Flow MeterSierra Instruments, Inc.: MONTEREY, CA – Sierra's Innova-Sonic® Model 205 Thermal Energy Meter is a transit-time ultrasonic flow meter designed to measure the thermal energy flow rate and totalized energy consumption in liquid heating and cooling applications including HVAC, office buildings, large condominium or apartment developments, solar thermal heating and geothermal. Non-intrusive clamp-on ultrasonic sensor technology makes for easy and economical installation. The Model 205 Thermal Energy Meter offers high accuracy (+/-0.5% of reading) enabling custody transfer of thermal energy. Built-in totalizers and data loggers are used to record daily, monthly and yearly totalized energy usage and report total energy used. These functions make it easy to account for energy usage and accurately allocate costs to end users. A built-in SD card and a supplied data-analysis and graphing program allows for easy storage and analysis of collected data. The Innova-Sonic Model® 205 Thermal Energy Meter includes ultrasonic transducers, remote electronics, and two PT100 resistance temperature detectors (RTD's) supplied ...





+ Info
 

Top-7 Sensors & Measurement News

 

Find all sensor & measurement suppliers & news
- Access to the database -

 
 

Sens2B - Sensor to Business
100% Sensors, Instruments & Measuring Devices

The International Sensors, detectors & measurement Portal
Manufacturers and suppliers of sensors & measurement devices

Sensors & measurement news

and technical articles
in week 29/2009:

 

HBM launches SoMat eDAQ and eDAQlite rugged, mobile data acquisition systems
 
SoMat eDAQ and eDAQlite rugged, mobile data acquisition systemsHBM, provider of state-of-the-art transducers, signal conditioning electronics, data acquisition systems and measurement software, announced the release of their newly acquired SoMat eDAQ and eDAQlite data acquisition systems. SoMat systems have been leaders in field data acquisition for over 25 years servicing Fortune 500 companies in the automotive, off-highway, aerospace and defense industries. SoMat systems have set the standard for rugged, mobile data acquisition. Engineered for stand-alone testing in the harshest of environments; eDAQ systems provide leading-edge signal conditioning and a capacity to perform a broad range of on-board data processing, triggering and complex mathematical computations. They are fully sealed from the elements yet modular and flexible with support for a wide range of vehicle bus and GPS options. eDAQ systems utilize standard Ethernet communications, and host their own web servers with configurable IP addresses. No software is required to start/stop test or upload data. This combination allows the eDAQ to effortlessly communicate through wireless WWAN modems, bypassing corporate firewalls giving users access to their system ...





+ Info

The first magnetic incremental encoder now programmable!
 
Baumer magnetic incremental encoderBaumer: Keeping the configuration variety down to a minimum is one major user requirement. For the first time, by programmable EcoMag BRIx 58 also incremental magnetic encoders are up to this demand. The benefits are quite obvious: Cost reduction by less inventory, no lead times and optional re-configuration for multiple use. Besides the impulse number, also rotating direction and zero point blanking are programmable by the same configuration tool utilized by the optical incremental encoder series BHF/BHG HighRes. The wide impulse number range in conjunction with the well-proven EcoMag ruggedness round the package off. Encoders in the EcoMag series convince by ultra-high efficiency and long service life. The magnetic sensing method less any breakable optical components opens up applications where conventional encoders fail. EcoMag series ...





+ Info

The Sens2B-Reports "Edition July / 2009" are now available
 
Sens2B-ReportsThe new  Sens2B-Reports "Edition July / 2009" are now available. The Sens2B-Reports offer easy-to-use Excel-listings of currently more than 8500 worldwide sensor suppliers, carefully selected, and now again updated by the Sens2B-Expert-Team. Take advantage of this practical listings which offer you a very fast overview of the sensor technology specialized companies in every country. Save your time & effort, when searching for potential business partners for your projects in any country worldwide. Fast and convenient. Just click through the websites of the listed companies and find:





+ Info

New FlexTop Family – Individually Configurable Temperature Transmitters
 
Baumer FlexTop Family – Individually Configurable Temperature TransmittersA new FlexTop familiy was presented by Baumer’s product segment Process Instrumentation at the ACHEMA exhibition. The individually configurable temperature transmitters of the series 2202, 2203 and 2204 are suitable for the food and beverage industry, pharmaceutical and biological technologies, chemical and petrochemical industry as well as for heating, ventilation and air condition applications. The input can be configured for thermocouples, resistance sensors and voltage signals. The new FlexTop family replaces the FlexTop 2201. The cost-efficient temperature transmitters can be configured with different input signals and have an improved output performance. FlexTop 2202 is a digital temperature transmitter for a measuring range of -200°C to 850°C. The input can be set up with a Pt100 resistance thermometer, a resistance sensor or a potentiometer (each with 0 to 500 Ohm). The accuracy is better than 0.25°C. For the FlexTop 2203, the input can be a thermocouple (sensor types B, J, K and S) or a 0…100mV voltage signal. Depending on the sensor type, the accuracy is between 2 and 3°C. The temperature transmitter is ...





+ Info

Eric Pilaud Appointed President & CEO of Custom Sensors & Technologies
 
Moorpark, CA – Eric Pilaud, Executive Committee member of Schneider Electric has been appointed to the position of President & CEO of Custom Sensors & Technologies (CST), effective July 1, 2009. Eric was previously in charge of Strategy, Customers, Innovation & Technology for Schneider Electric. Eric began his career as both a university professor and researcher and a corporate consultant in the information technology sector. He joined Schneider Electric subsidiary SES in 1986. Five years later he was appointed to head SF Gandy in Chalon-sur-Saone (France). Mr. Pilaud spent 1995 to 1998 in the UK, first as director of Westinghouse Systems and then of the Automation and Control Division. He led the “Schneider 2000+” Company program from 1999 to 2000. He was subsequently responsible for the development of eBusiness within the group (eBusiness@Schneider Electric) until 2001. Between 2002 and the end of 2003, he was in charge of the Strategy Markets Division. In 2003, he was named Executive Vice ...





+ Info

GH14D – The new reference in M5 pressure sensors for combustion analysis
 
GH14D – M5 pressure sensors for combustion analysisAVL recently released the new pressure sensor GH14D which allows the most precise measurements for combustion analysis with a sensor of its size. The high performance of this front sealed mounted sensor is realized by using thermally optimized piezoelectric elements and the special AVL Double-ShellTM design which decouples the piezoelectric elements from negative influences of thermal expansion and other mechanical effects. A version with a modified membrane structure is available as well which is called GH14DK. It allows maximum pressures of up to 300 bar. This makes the GH14DK very rigid and still accurate even under severe knocking conditions. Both sensors are equipped with AVL’s IEEE 1451 fulfilling sensor identification which supports AVL SensorDataManagementTM (SDM) ...





+ Info

Michell launches smallest and fastest portable in range
 
Dew Point HygrometerMichell Instruments’ new MDM300 Advanced Dew Point Hygrometer demonstrates that size really does matter. At just 21cm by 17cm, weighing 1.5kg, and with a battery life of up to 48 hours typical usage, it enables the user to take field measurements with the minimum of fuss. New developments in Michell’s ceramic sensor technology have dramatically reduced the response time for low dew points, allowing for many more measurements to be taken each day. The MDM300 also has an innovative ergonomic design, with all the buttons easily accessible while the instrument is held comfortably in both hands. All measurement parameters are available at the touch of a button and the password protected set-up menu is simple to navigate and intuitive to use. Both instrument set-up and downloading of logged data are easy with a Bluetooth connection that comes as standard. To maximize flexibility, external sensors can be easily connected and used to measure and display pressure and temperature. These parameters can also be used to provide pressure and temperature compensated measurements ...





+ Info

Microwave measurement for the sugar industry
 
Microwave measurementBERTHOLD Technologies: An important parameter for the sugar production is the concentration of the sugar massecuite. Measurement of the dry substance content, usually represented as Brix is absolutely essential in order to optimize, control and improve the sugar quality. Based on experience in process control, BERTHOLD TECHNOLOGIES provides products, which exactly match the instrument needs and expectations of customers producing sugar. We offer specially designed microwave sensors for measurements in product pipelines, dissolved sugar containers, crystallizers and at other process locations. The Micro-Polar Brix provides accurate, reliable online concentration measurements of the sugar magma over the entire process. ...





+ Info

Sierra Introduces New Large Duct & Stack Mass Flow Meter: Multi-Trak™ Model 670S
 
Large Duct & Stack Mass Flow MeterSierra Instruments, Inc.: MONTEREY, CA – Sierra is proud to announce the release of its new Multi-Trak™ Model 670S Multi-Point Mass Flow Meter System. The new Multi-Trak™ Model 670S is an advanced state-of-the-art instrument for measuring mass flow rates in very large ducts or stacks that have non-uniform velocity profiles, high turn-down requirements, dirty gas streams, wide temperature ranges and fast velocity and temperature changes. The Model 670S dynamically compensates for changes in the flow profile by using up to four independent mass flow sensing points to measure the instantaneous average gas mass flow velocity. The Multi-Trak™ is commonly used in petrochemical refining, coal-fired electric power generation, steel manufacturing and many other industrial processes that face the challenge of accurate and repeatable gas mass flow measurement in very large pipes or ducts. An innovative, versatile and user-friendly microprocessor-based Human Machine Interface (HMI) controls all functions of the Model 670S system. The HMI is used to collect, visualize and store flow data, as well as set up the individual sensor points, thus allowing the entire system to ...





+ Info
 

Sensors & Measurement News in week 28 '2009    <<   >>  Sensors & Measurement News in week 30 '2009


 

Top-7 / All Sensors & Measurement News

 

Find all sensor & measurement suppliers & news
- Access to the database -

 
 
 
 

 

 

 

Copyright © Sens2B International
Sens2B - Sensor to Business

Sens2B - Sensor to Business is the international measurement technology and sensor suppliers directory / sensors portal. Sens2B - Sensor to Business does not manufacture or sell any sensors or measuring devices. You will find in Sens2B - Sensor to Business database international sensor companies, international manufacturers, suppliers and distributors of all kind of sensors, transducers, transmitters, measurement instruments, devices, probes, meters and detectors.

Powered by Sens2B - WebDesign

***

Sensors: English / Sensoren: Deutsch / Capteurs: Français / Sensores: Español / Sensori: Italiano
Top-7-News: English (sensors) / Top-5-News: Deutsch (Sensoren) / Top-5-News: Français (capteurs)
About us / Contact us / Conditions of use / Registration / Sensors by application / Newsletter / Sensor Categories Overview
Partners & Links / Sens2B- Reports (Sensor Suppliers & Sensor Reports)