Sens2B
Sensor to Business
100% Sensors, Detectors
& Measurement Devices
   
 Sens2B - Sensors & Measurement Homepage
 
English pages Deutsche Seiten Pages en Français Páginas en Español Pagine in Italiano

 

Welcome to the world of measurement & sensors technology. Read up-to-date measurement & sensors technology news and search for worldwide manufacturers, suppliers of sensors, detectors & measuring devices.

Search Sensor & Measurement Suppliers & News
- Access to the main pages -


The Sensor to Business - sensors & measurement database:
Find sensor manufacturers, sensor suppliers and suppliers of measuring devices in the following categories:

Applications, measured properties:

Other categories

Suppliers of sensors & measurement devices by country

Sensor & measurement suppliers by region. Find all measuring devices & sensor manufacturers, international sales offices, local sensor technology representatives and distributors listed by country / regions.


Sensors & Measurement news:



Sensor & Measurement news in other languages


Wtrans, Wireless temperature measurement – now with a new transmitter and additional receivers
 
Wireless temperature measurementThe Wtrans series from JUMO contains a new transmitter with M12 connection for adaptation to existing Pt 1000 resistance thermometers. Additional receiver designs are also available, which have two rather than four analog inputs, but also have two relays for a variety of monitoring tasks and are suitable for supply voltage of either 230V or 24V. The transmitters are located in a probe handle and are protected by a watertight housing. The radio frequencies used are largely non-sensitive to external disruptive influences and permit transfer even in a rough industrial environment. The probe with a fixed protective tube is designed as an insertion measurement probe and is available with an installation length of 50 to 1000 mm. A platinum chip resistor is used as a high-precision measurement element. On the transmitter side, a functional temperature range of -30 … +260 °C has been achieved with a fixed protective tube, and a functional temperature range of -100 … +500 °C with M12 connector and remote probe. The permitted ambient temperature ...





+ Info
 

Top-7 Sensors & Measurement News

 

Find all sensor & measurement suppliers & news
- Access to the database -

 
 

Sens2B - Sensor to Business
100% Sensors, Instruments & Measuring Devices

The International Sensors, detectors & measurement Portal
Manufacturers and suppliers of sensors & measurement devices

Sensors & measurement news

and technical articles
in week 44/2008:

 

Sierra Instruments Introduces New Primary Standard Gas Flow Calibrator For High Flows Up To 500 Slpm
 
Cal=Trak™ XL Primary Standard Gas Flow CalibratorSierra Instruments announces the release of its new Cal=Trak™ XL Primary Standard Gas Flow Calibrator for high flows up to 500 slpm. Ideal for calibration of gas measuring instruments including mass flow meters and controllers, Cal=Trak™ XL offers class-leading accuracy of +/- 0.25% of reading. The dimensionally-based primary accuracy of the Cal=Trak™ XL is superior to pressure-based secondary methods and is backed by a rigorous uncertainty analysis. Like all members of Sierra’s Cal=Trak™ Series, the Cal=Trak™ XL is a primary standard piston prover that operates with the press of a button--assuring end-users the ultimate in calibration accuracy, convenience, ease-of-use and productivity. At 33”H x 24.6”W x 12”D, Cal=Trak™ XL fits on any laboratory bench replacing large bell provers with one simple, integrated package. It can be used in the manufacture, inspection, validation and recalibration of mass flow controllers, flow meters and many other varieties of flow equipment with flow rates too high for common primary standard devices. In either manual or automatic operation, Sierra’s Cal=Trak™ XL measures, displays and outputs the flow of gas, either in mass or volumetric units. ...





+ Info

Loadstar Sensors launches DS-3000 Series display and controller to work with award winning load cells
 
DS-3000 Series interface device for the iLoad Series load cellsLoadstar Sensors Inc. of Fremont, California has launched a new family of displays that are built to work seamlessly with its successful line of load cells. The new DS-3000 four channel display is an integral device that incorporates display and controller functions combined into one. A user can connect up to four iLoad series load cells and view individual and/or total loads in three different units: Kilograms, Pounds and Newtons. Additionally, a user can interface via USB uplink to plot/chart the data to a PC. Optional relay outputs allow users to activate relays based on load limits in order to control up to 2 external devices. The DS-3000 provides many key features in order to simplify the process of building a load measurement system: - Accepts input from up to four iLoad series load cells - Automatically sums loads from all connected load cells - View individual load cell readings - Display resolution ...





+ Info

Optical distance measurement and data transmission work directly side by side
 
AMS 200 distance measuring devices, Optical distance measurementAMS 200 distance measuring devices from Leuze electronic operate with the aid of laser red light and can be used alongside DDLS 2000 optical data transmission units without risk of mutual interference. Additional data output flexibility is provided by new interfaces. Optical distance measurement is an ideal way of ensuring the continuous and absolute determination of automatically moving equipment such as rack handling devices, gantry crane bridges, trolleys or transfer bridges. Absolute Measuring System AMS 200 from Leuze electronic offers outstanding precision coupled with operating simplicity and optimum connection convenience. Up to a range of 200 metres, measured positions are precisely reproduced to an accuracy of just millimetres. Over a measured distance of 120 metres, an absolute accuracy of ±2 millimetres is achieved, with ±3 millimetres over a distance of 200 metres. The high-speed position calculation of the AMS 200 permits optimum utilization of modern drive system dynamics for high-speed positioning of X and Y axes. Once processed by the software, the distance data received by the distance measuring system is made available in the form of speed information. ...





+ Info

Inductive High Temperature Sensors - Hot Heads ...
 
Baumer IFRH series of inductive high temperature sensorsBaumer Electric: Baumer’s IFRH series of inductive high temperature sensors have been designed for operating temperatures ranging from -25 °C to +180 °C. The two part proximity switches intended for flush front face installation are available in M8, M12 and M18 designs with chromium nickel steel housings. With an overall length of a mere 30 mm, the M8 sensor is ideal for installation under conditions of limited space. Depending on the housing size, the nominal switching distance ranges from a minimum of 1 mm up to a maximum of 5 mm. An FEP jacketed cable allows the processing electronics to be separated from the actual sensor head and to thus be easily and protectively installed outside the hot range. The operating voltage range lies between 10...30 VDC, while the protection class is IP 67. In addition, Baumer also offers capacitive high temperature sensors for detecting nonmetallic components in hot environments. ...





+ Info

PRESENS Announces Space Contract with ESA
 
Presens pressure sensorsPresens AS is pleased to announce the award of a new contract from the European Space Agency (ESA) to design and develop pressure sensors for deployment in a wide array of space applications. The product development project is worth EUR 500.000 and is scheduled for completion in the first quarter of 2010. PRESENS patented pressure sensing technology enables extremely accurate measurements of pressures under demanding conditions. Due to several key properties such as long-term stability, small size, large output signal, fast response and extreme robustness, PRESENS’ sensors are well-suited for spacecraft applications. Over the last few years, PRESENS has participated in a number of research and development projects within the space sector. The previous collaboration program with ESA resulted in space qualification of a high pressure sensor. This is now installed on the Swedish spacecraft PRISMA, scheduled for launch in June 2009. “This contract signifies an important step towards further commercialization of PRESENS pressure sensors in the space industry” ...





+ Info

FUTEK offers Pressure Sensors with USB Output
 
PFP350 Pressure Sensor with an USB output optionFUTEK Advanced Sensor Technology, Inc is now offering its PFP350 Pressure Sensor with an USB output option. FUTEK Engineering Labs has been working on the USB technology since the 2nd quarter of 2008 as the demand for USB Output has increased. Utilizing metal foil strain gage technology, the PFP350 is made from 17-4 Stainless Steel, weighs 5.5 oz, has mV/V output as a standard and ranges from 300 – 10,000 psig. This PFP350 is designed and manufactured in USA. Product Highlights: - Metal foil strain gauge technology - 17-4 Stainless Steel Construction - Weight: 5.5 oz - Unamplified out mV range - Capacities from 300 – 10,000 psig. FUTEK also offers its Semi Flush Mount (PFS) and OEM (PMP) series as additional solutions in the Pressure Sensor line. In addition to our Pressure Sensors, FUTEK carries over 400 products covering various Load Cells, Torque Sensors, Force Sensors and related Instruments.  ...





+ Info

Balluff Vision Sensor BVS – Starter kit available
 
BVS Vision Sensor from BalluffThe BVS Vision Sensor from Balluff is ideal wherever a variety of details need to be detected as part of 100% quality inspection: The unit represents a complete solution with seven different evaluation functions and the ability to perform up to 16 inspection tasks at the same time. Functions such as counting edges, recognizing patterns, checking contours, and monitoring contrast and position are all carried out at a detection rate of up to 15 Hz, sending the results to the PLC or process controller as OK/Defect signals from three independent outputs. The integrated LED light source ensures optimum illumination of the target area. A new addition is the BVS Starter Kit, which is based on the tried and true Balluff BMS Mounting System. With the Starter Kit connecting and starting up the Vision Sensor is child’s play. It includes everything needed for reliable and shake-free operation, such as cable, mounting bracket and screws, a printed quick-start sheet and the intuitive BVS ConVis® software. This menu-guided software eliminates lengthy training or the need to learn any special programming language such as required by many other vision sensors. ...





+ Info

Sierra Introduces Engine Air Intake Mass Flow Meter for Engine Testing Applications at Automotive Testing Expo
 
Engine Air Intake Mass Flow Meter for Engine Testing ApplicationsSierra Instruments’ Emissions Systems Division showed their Air-Trak™ Model 628S Air Intake Mass Flow Meter at the Automotive Testing Expo in Novi, Michigan on October 22-24, 2008. The Air-Trak™ Model 628S, originally designed to work specifically with Sierra’s Model BG®-3 Partial Flow Sampling System as an extremely fast, accurate, and repeatable engine air intake mass flow meter, is now offered as an excellent solution across the board in all engine testing applications. Air-Trak™ is specifically designed to measure engine air intake mass flow rate. The meter uses Fast-Flo Sensor Technology® for an extremely fast, 200 millisecond response-time making it ideal for the toughest transient test cycles. Integral Dual-Plate laminar flow conditioning elements and a wide 15:1 turndown make Air-Trak™ a flexible solution for the constrained piping environments commonly found in today’s engine test cells. In addition, the versatile microprocessor-based instrument integrates the functions of flow-range adjustment, meter validation and diagnostics encased in a probe-mounted NEMA 4X (IP65) housing. Mass flow rate ...





+ Info
 
 

Sensors & Measurement News in week 43 '2008    <<   >>  Sensors & Measurement News in week 45 '2008


 

Top-7 Sensors & Measurement News

 

Find all sensor & measurement suppliers & news
- Access to the database -

 
 
 
 

 

 

 

Copyright © Sens2B International
Sens2B - Sensor to Business

Sens2B - Sensor to Business is the international measurement technology and sensor suppliers directory / sensors portal. Sens2B - Sensor to Business does not manufacture or sell any sensors or measuring devices. You will find in Sens2B - Sensor to Business database international sensor companies, international manufacturers, suppliers and distributors of all kind of sensors, transducers, transmitters, measurement instruments, devices, probes, meters and detectors.

Powered by Sens2B - WebDesign

***

Sensors: English / Sensoren: Deutsch / Capteurs: Français / Sensores: Español / Sensori: Italiano
Top-7-News: English (sensors) / Top-5-News: Deutsch (Sensoren) / Top-5-News: Français (capteurs)
About us / Contact us / Conditions of use / Registration / Sensors by application / Newsletter / Sensor Categories Overview
Partners & Links / Sens2B- Sensor Suppliers Extension & Sensor Reports